Very Nice Set-up, ya'll gave me some great ideas when I can get my 24x31x12 Wash Bay up and going. Merry Christmas To All You Guys & Ladies @ The Rag Company
Very cool guys. I finally after many years went ahead and got the proportion system setup with the big 3d 6 gallon nano pails. Wish I could have done that years ago! Next up I’ll definitely want that ability go get some air chemical guns like you got there.
People can lift-off ideas(parts and bits) and use it minus-one for their kitchen-laundry(washing-area, wash-bays, laundry-rooms, steam..., drying, ...)
Love the lighting! What are you using for drying? EGO? Love the ability to have air lines in addition to the feed for product, makes blowing out polishing pads a breeze...pun intended. Happy new year TRC, keep up the awesome!
did y'all get rid of the chemical dispensing system with the new updated set up? im interested details if y'all were unhappy with how it worked, not worth it? too much headache and upkeep?
gracias excelente panorámica de tu estudio de detallado, solo preguntar sus productos P&S cuales si se diluyen y cuales no? y mas o menos como es la cantidad de mezcla,. Gracias y espero respuesta.
Awesome setup guys! I actually wanted to know what brand and type of overhead shop lights you guys use? I've been planning on switching to those nice looking hexagon lights as well.
There’s no valve on the out side of the filters. Meaning water pressure would back feed into the filters a bit. Or if you go to service them you can’t have water just in bypass you have to turn off all the water. Oops.
Cr spotless sucks!!!! It’s so expensive compared to what I have. Call your local water systems company’s ask for a di system and they will save you so much money. Mine costs 80% less than that CR spotless crap overall
![[DRAGON BALL LEGENDS REVEALS ＆ STUFF] LEGENDS FESTIVAL 2024 Special Edition Part 1](http://i.ytimg.com/vi/mV5bGIswTtQ/mqdefault.jpg)
Installation was quick and easy. It doesn't make a whole lot of noise, and it's worth every cent.
What a treat on a lovely Christmas morning
Holy cow! What a setup!
What a great setup. Gave me some good ideas for our new shop
That is the ultimate dream shop setup! Very nice work!
Merry Christmas! Very impressive set up, gives everyone some great ideas. Thanks!
The curtain is amazing. Life goals.
Cool setup! Get some GFCI outlets inside that solution room in case a water leak or water pipe burst you can have protection.
Merry Christmas guys!
Awesome video! I like the mix system and wall system. Thanks for showing us this detailed tour of your washbay.
Amazing ive been wanting to see the wash set up great to see on Christmas
Very Nice Set-up, ya'll gave me some great ideas when I can get my 24x31x12 Wash Bay up and going.
Merry Christmas To All You Guys & Ladies @ The Rag Company
Merry Christmas, such a gift.
Wow. Unbelievable set up. Merry Christmas.
Very cool guys. I finally after many years went ahead and got the proportion system setup with the big 3d 6 gallon nano pails. Wish I could have done that years ago! Next up I’ll definitely want that ability go get some air chemical guns like you got there.
Great set up, love it! Well done.
Kieth is the man!! Great setup guy’s!
Thanks for sharing your setup and how you made it all come together. Very impressive!
Great video!
Looking forward showing around/tour videos
People can lift-off ideas(parts and bits) and use it minus-one for their kitchen-laundry(washing-area, wash-bays, laundry-rooms, steam..., drying, ...)
Very cool! Need to come visit you guys, I am in Emmett.
I’m sooo in love with this setup!😍😍
You shared all the products in the spray system but one! What do you you use for a waterless wash?
nice video. Show us the rest of the shop! like the polishing area etc
Love the lighting! What are you using for drying? EGO? Love the ability to have air lines in addition to the feed for product, makes blowing out polishing pads a breeze...pun intended. Happy new year TRC, keep up the awesome!
Well they are a towel company...so perhaps that? ;)
did y'all get rid of the chemical dispensing system with the new updated set up? im interested details if y'all were unhappy with how it worked, not worth it? too much headache and upkeep?
Brilliant set up guys
question? where is the water going to? is it being sanitized before entering the drains?
Hi there. Which company makes the lights that are in the ceiling of the wash bay?
How do you wash under the vehicles. It's very important.
When you use the outside wash bay why not have a little hook to hold the hose against the post so the wind doesn't blow it into your car?
Can I run rainwater or can I use recycled water through this? Thanks!
I totally need this!!!😆 Such an amazing set up! Levi did you do ALL that??
gracias excelente panorámica de tu estudio de detallado, solo preguntar sus productos P&S cuales si se diluyen y cuales no? y mas o menos como es la cantidad de mezcla,. Gracias y espero respuesta.
Are you guys able to supply this equipment to Australia 🇦🇺??
Curious on your floors. It looks like you have one of those water containment mats. How’s does that work out?
Merry Christmas
Anthony: (opens the wash bay curtain)
“Not a bad way way to spend ten grand”
Amazing setup! 👏
How often do you change the inside filters on the spot free machine?
very nice set up
what do you do with all the water that gets under that floor liner?
Awesome setup guys! I actually wanted to know what brand and type of overhead shop lights you guys use? I've been planning on switching to those nice looking hexagon lights as well.
Ditto. I’ve seen those in other detail shops and they seem to put out great daylight but don’t know where to find them
my friend, where can I find this wash floor tarp?
Super clean
Nice stuff great set up!!
Very cool setup! 👍
Nice set up
Where did you get the HEX lights???
All beautiful - one Q - Where does the water drain to after landing on the mat? And if it doesn't how do you get rid of it?
Guarantee a wet vac sucks up what doesn’t evaporate
Might have a drain system under each vehicle spot
They have a little pump and scoop all the water to it,from there it goes to sink.
So by hearting/loving Dino's response is it safe to assume that is the method TRC???
@@DinoGrahovic that’s correct!
Great for pool filter cartridges
Awesome setup
where can I buy that spray dilution system?
Once again guys, thanks for the tour back in June! #chirpchirp
The chem spence systems are great
Whats the model of kranzle pressure washer? Thanks
Nice setup
Nice work shop
what is the led light 6500k cool light or daylight?
what model flow jet do you have?
There’s no valve on the out side of the filters. Meaning water pressure would back feed into the filters a bit. Or if you go to service them you can’t have water just in bypass you have to turn off all the water. Oops.
Anyone know what model flojet they’re using?
Amazing!
I don't understand. Why not use a large di water tank that gets a lot more gallons of use than a cr spotless
That was dope
Why are you not using ro water after this extreme build? Di costs way too much if your washing a lot of cars.
Damn.. I live down the street from you guys could I come wash my truck🤣
Wow ,, nice 👍
Thnks bro
algún latino que haga car detailing como yo por aca?
Cr spotless sucks!!!! It’s so expensive compared to what I have. Call your local water systems company’s ask for a di system and they will save you so much money. Mine costs 80% less than that CR spotless crap overall
Seems like a lot of overhead how much you charge for a wash? lol
This video just cost me a lot of money, LOL
Link to the containment mat?
@@theragcompany 1600$ that is ridiculous are you sure that’s the only option to get
@@theragcompany how do you clean it after use
@@theragcompany so is it best to use distilled water to dilute break buster, interior etc?