Mid Century Modern Media Console
HTML-код
- Опубликовано: 19 фев 2022
- Our new living room needed a new media center so I got to building. In this video I go over my processes and the tricks I used along the way to make it go as smooth as possible. The process was very fun and I am in love with this one. I hope you like it too!
Here are the affiliate links for the blades I used on this build that @HomeDepot sent me as part of the #homedepotprospective program:
Diablo 10 in. x 80-Tooth Ultra Finish Circular Saw Blade: homedepot.sjv.io/c/2591920/12...
Diablo 4-5/8 in. x 13 TPI Ultra Fine Finish Bi-Metal Jigsaw Blade (5-Pack):
homedepot.sjv.io/c/2591920/12...
Big thank you to @HomeDepot for sponsoring this build.
You can find out more about me here on my website:
www.coffeycustombuilds.com/links
Subscribe to Coffey Custom Builds for woodworking videos, build videos, shop tips, shop upgrades and more!
I make daily posts and do a lot of stories over on Instagram and you can follow me over there at:
/ coffeycustombuilds
You can check out the podcast I do with a couple other guys over at:
/ anotherwoodshoppodcast
#midcenturymodern #mediaconsole #customfurniture 
Хобби
Outstanding video! I love the dado cut reenactment!😂
Those kinds of things happen to us all.
🤣🤣
Good to see a good long build video! Keep them coming bro. The console looks awesome!
They'll be coming every couple weeks now!
Glad to see you make a video. It's been awhile. Awesome work. Oh ty for the round temple you made for me. Great job.
Thanks for watching man!
Awesome build! Simple and clean. Keep up the great work!
Thank you
One of my favourite builds you made! Awesome job dude!
Thanks man! It's one of mine too!
Killed it. Beautiful. Love the legs and the doors.
I really appreciate it Max!
Great video Mike. I picked up a few tips and I truely enjoyed the whole build process.
I also breakdown 8/4 with the Festool Carvex…
Sidekick XL working hard😉
Thank you! It was a ton of fun to build. I love my sidekick!
Truly Amazing. Definitely not Meh. Keep up the hard work. Can’t wait to see more.
😂 the opposite of meh. So much cums.
Very cool. I like the off cut tip for glue up. Never seen that one before
Complimentary angles are dope dude!
Looks great! Can’t wait for your next video
I'm getting to work on the next one asap! Thank you
Nice job man, looks really slick!
Thank you much sir
Nice work buddy. Great video and beautiful piece of furniture
Thank you bro! Can't wait to make it's siblings!
Mike, congrats on 100 episodes of AWP! I know you are hella busy these days, it’s nice to see a video, I hope you can do more and have fun with it again ✌🏻
Thank you! I will be doing more videos for sure
I love some MCM pieces! Fantastic job Mike!
Thank you! Appreciate it man
Very nice channel, man! You have a new follower. Great build!
Thank you so much!
Looks sooo good!
Thank you bro! Really happy with this. Wrapping up the design for our credenza and a sofa table!
Beautiful design and awesome video bud!
Thank you! I love this piece
Fantastic build and video my dude!
Thank you bro
Great video, Mike!!
Thank you homie
That’s a really cool build!
Thanks man! It was a ton of fun!
Came to the channel from the podcast. Great content and I learned some good techniques.
Man thank you for all the support!
Because walnut, lol. Great build and video, Mike!
Thank you sir!
Great build Mike, that’s a console the Meh army can be proud of 🤣
I absolutely love it and that English walnut is beautiful!! Look forward to the next video mate. Keep up the great work 👍
😂😂 appreciate it!
Yes I used those for the breakdown of an adjustable dining table I built
Awesome
Good stuff
Glad you enjoyed
Very nice.
Thank you sir
i'll go notification squad, for some reasons these treasures never show up in my feed. Go for it !!
😂
A radial arm saw would have been money for those dado cuts! I have had trolls rip me a new one for cutting stock on my table saw that was wider than it was longer.
Definitely would have been nice. Trolls can pound sand. Do what you're comfortable with. Who cares what some moron who's never done it thinks
Mike, Looks great. Beautiful work man. Another joint for the legs is a mitered bridal joint. The only think I would have changed was to take the backer board up into the top. I noticed a little daylight up there, but not much. Since it will be a media cabinet you likely won't notice against a wall.
There was no daylight. Thank you!
GO SHAWN!!!
He's the man
Came for the content, stayed for the beard.
🙌🏻
Beautiful piece mike. What size is that drum sander?
It's a 37" dual head.
8/4 meh. Love this console. Great build, as always.
Thank you my friend.
Thx for the video. Where’s your tool pouch/belt from? Looks easier to use then the bulky ones
It's from Leather By Dragonfly. Incredible stuff. It's called the Sedgely.
Thx for reply but I was referring to the brown leather on your left hip. Is that one also from Dragonfly?
@albinchristensen6141 oh sorry! Yes. Same folks. Called the Sidekick.
Why isn’t the blade spinning when cutting the center dado? Haha kidding aside this was a great video Mike, really happy to see another RUclips video of yours up. Love the build and but now I want to make a walnut media console….
Thanks for watching man! There will be many more this year. Top priority!
@@CoffeyCustomBuilds excited to see em drop! I like how you structure your videos so I’m pumped to see more.
Found you in DIYs
Great.
I just ran across your video, where can I I get a pouch like the one you are wearing?
You can get it from Leather By Dragonfly
Whats the verdict since this vid... Mirka or Festool for orbital sander? Which would you grab first?
My mirkas are all breaking and they won't service them if that answers your question.
@@CoffeyCustomBuilds appreciate it. We have the rotex 150 but just the dewalt palm and will be upgrading it soon. That absolutely answers my question. Much appreciated.
I think it's terrific, but I really wish you hadn't gone down the shaker route for the doors. It kills the MCM look.
It’s gonna be okay though. Thanks
Please tell me the way your saying Diablo is a joke. Great work.
DEEE-AHHHH-BLOOOOO
@@CoffeyCustomBuilds hahaha!!
Bro! Sorry for telling you but maybe your dust collector is broken 😂😂😂😂
It's a mess
@@CoffeyCustomBuilds 😂😂 I thought 💭 I was the only one … my workshop is worst then yours 😅
I like the vthe build. Seems very meticulous. Although if I'm going to be honest I don't think the hardware fits. It's like the wood and details aim for a fairly high level build and then the hardware and edge banding kind of waste it. As a client paying top dollar/euro for a furniture piece like this I wouldn't be happy. Anyway that might be just me. As I said I gave a thumbs up :)
Your comment is all over the place.
@@CoffeyCustomBuilds in short I like it and the whole channel, but these tiny details in this particular piece, that I mentioned... I think didn't match the high quality of the rest. These hinges for example feel cheap or generic and I associate them with lower grade furniture.
@@jackskalski3699 there is no exposed hardware so I'm not sure what you're referring to. It's a concealed euro hinge. That's the only hardware.
Dude no vac hose, no mask? Why?..
I actually died from it.
Keep shining as brightly as you do! You are late to the party = P-R-O-M-O-S-M!!!
Thanks