@@pullumoto my PCX sat in garage for a period. Found a circular oil spot on garage floor. Turns out it was coming from the bottom plug. Cleaned everything up then used a small smear of gasket sealer for on face of plug. I think this will do it. Other then that your instructions were great. Thanks again
@@Bangandthedirtisgone most oil bottles have a window on the side which shows you how much oil you poured into the engine, if you don't have it either pour in a measuring cup or work by estimation, you can always put the dipstick back in the engine and remove it again to check the oil level and fill as needed.
At the time of video i didn't have the oil light yet as it was the first service but i do have a video showing how to reset it ruclips.net/video/O87gNWg8FjE/видео.html
Outstanding vid. Thank you. Do it yourselfer’s can always use help and you did just that with this vid. Excellent.
Glad it was helpful!
@@pullumoto my PCX sat in garage for a period. Found a circular oil spot on garage floor. Turns out it was coming from the bottom plug. Cleaned everything up then used a small smear of gasket sealer for on face of plug. I think this will do it. Other then that your instructions were great.
Thanks again
Nice job man, i was totally confused on how to change the oil on my 2019 pcx but now i 'm sure i can handle it. thanks
Thanks, glad it has helped you out!
Take dipstick out oil then gets atmospheric pressure to help it flow,, page one mate
As soon as you unscrew the bolt it doesn't make any difference... ;) And yes, bottom of engine compartment is never pressurized. ;)
did you fill 0,9 litres or 1 litre? Thank you.
0.9L
@@pullumoto If the oil comes in a 1L bottle how do you make sure only 0.9L goes in? How do you know when to stop?
@@Bangandthedirtisgone most oil bottles have a window on the side which shows you how much oil you poured into the engine, if you don't have it either pour in a measuring cup or work by estimation, you can always put the dipstick back in the engine and remove it again to check the oil level and fill as needed.
@@pullumoto Thankyou!
Was the filter tricky to put in and out?
its actually quite easy, keep in mind the position of the spring when you remove it
You did not mention how to reset the oil change light on the dashboard
At the time of video i didn't have the oil light yet as it was the first service but i do have a video showing how to reset it
ruclips.net/video/O87gNWg8FjE/видео.html
Thanks
How many km after need to change oil in the pcx125
The official interval is around 8000km but you can always change it earlier
@@pullumoto Honda in my country says 6000km
What For gear oil?
same as engine 10w30
Thank you !
can I use synthetic 10/40w motor oil?
yes you can use synthetic. Use 10w40 oil if you live in a hot climate
@@pullumoto Thank you....it was 5/40w synthetic that I put into the engine. All good
Can use 10w40 semi synthetic my pcx
A good clean with a dirty rag? 🙄
Enkiswahili