Dude this is actually awesome. I’ve wanted to try painting parts in my barn but didn’t know how to control the overspray or fumes. This is legit genius!
Nice little booth. Back in the late 70's my husband and I opened an independent custom body shop. We couldn't afford the big commercial paint booth he had grown to love working in at a Lincoln dealership. He was very good at designing and building and knew exactly what it takes to make it work. We built our own full size paint booth. It had lights, clean air filtering system, exhaust fans with no flow back dust, water plumbed to the inside and a floor drain. Even had a double enter room for changing and prepping to paint. He did custom work that included many show cars, boats, bikes so it he had to have that perfect no trash finish. That homemade booth lasted him many many years.
Haha I was brainstorming how to build mine and this is exactly what I thought of. Only difference is I’m gonna have to make it taller and get a bigger tarp because I plan on driving my f150 under it because I’m doing my roof panel
@@HappyFish50 I got that part I just didn’t understand the explosion proof fans. I didn’t know that was even a hazard or a type of fan. I think I’m gonna invest in a couple just to be safe. I would like to completely re paint my truck idk if doing it by parts is a smart idea. What do you think?
What if they shared pressure thru a connection hose tank to tank ? Would both motors still be able to run or only one at a time? Guess you could always put a shutoff valve between them 🤷
Have you painted, did you have any problem with exahust fans ? Just asking because they say exhaust fumes could going through fan motors? Is it something to worry about?
You can use 2×4 frame for about 50 bucks and the thicker mil plastic is about 20 bucks. We make these for our tile jobs. Except we put nice tarp under everything as well because wet saws get everywhere. You can get some clamps to hang things from and vent it where you want. Clients are very happy when you don't get crap everywhere.
Dude this is actually awesome. I’ve wanted to try painting parts in my barn but didn’t know how to control the overspray or fumes. This is legit genius!
Glad I could help!
Nice little booth. Back in the late 70's my husband and I opened an independent custom body shop. We couldn't afford the big commercial paint booth he had grown to love working in at a Lincoln dealership. He was very good at designing and building and knew exactly what it takes to make it work. We built our own full size paint booth. It had lights, clean air filtering system, exhaust fans with no flow back dust, water plumbed to the inside and a floor drain. Even had a double enter room for changing and prepping to paint. He did custom work that included many show cars, boats, bikes so it he had to have that perfect no trash finish. That homemade booth lasted him many many years.
Awesome idea nice job
Haha I was brainstorming how to build mine and this is exactly what I thought of. Only difference is I’m gonna have to make it taller and get a bigger tarp because I plan on driving my f150 under it because I’m doing my roof panel
You can double them up if you wanna make a full car booth
Nice! On the inlet side, put the filters on the outside. Otherwise over time the fan will get filthy. The outlet side is perfect
u could 2 tents for a full car tho
Hea but getting the car inside is the challenge
Boom, meeting jesus
Thank you so much! I'm a high school science teacher, and this will be PERFECT for me and my student to cook in! I really love this idea!
Thank you for watching! I’m glad I can help.
Funny comment even funnier because the maker responded and didn’t get it 😂
I thought Heisenberg died. I guess not
Walmart air purifiers work great at removing smoke
@@jtfoog5220😉😉🧪
The fresh air filter goes on the outside to pull, not push the dirt air.
Explosion proof fans and duct necessary. DI-WHY.
@@Ltytify DI-WHY is right, but still need to do it correctly with the correct concept behind it...
I saw that too, so you’re saying that if I were to put the filter on the outside the fan would break?
@@thedevil9742 for fresh air, you want to suck it thru the filter not push it there..
@@HappyFish50 I got that part I just didn’t understand the explosion proof fans. I didn’t know that was even a hazard or a type of fan. I think I’m gonna invest in a couple just to be safe. I would like to completely re paint my truck idk if doing it by parts is a smart idea. What do you think?
Make Shure the fans are explosion proof...
this shit is genius
I like it simple items used ingeniously
Try putting the filters on the other side so that the suction makes a better seal on the inlet
Better watch out for the fumes from the paints. Those aren't sealed motors may go go boom.
yep, definitely need explosion proof exhaust fans if using solvents.
BOX FANS ARE BRUSHLESS SO NOT LIKELY@@michaelcrossley7349
This is exactly how it's done! Well done gents!
Thank you!
Who else thought he meant a painting booth for a party? 😂
Nobody with a brain.
In real paint dept in car manufacturing the fans blow particulates into a continuous water stream
is the zipper in the paint section?
Genius bro
What if they shared pressure thru a connection hose tank to tank ? Would both motors still be able to run or only one at a time? Guess you could always put a shutoff valve between them 🤷
Depending on the humidity I would not have a plastic floor. Just pour water and the fans need to suck the fumes and over spray cloud out the booth
Never do this, you could burn your house down.
The mob had these as well. They called them something a bit different.
Have you painted, did you have any problem with exahust fans ? Just asking because they say exhaust fumes could going through fan motors? Is it something to worry about?
2 gazebos sid by side 1x2 whole car? 👀
I think you’d have better luck if all the fans were facing out. If you can get your hands on a fog machine you can do a fun experiment.
Fucked up a whole grow tent for art. Smh. Thx for the info tho
I hope that’s a non spark fan lol
Nope 😅
a grow tent for weed is also a good option, comes in different sizes and a bag to store it in...
Was thinking the same
Great job 👍 what size is it?
I think it’s a 10x10
Nice grow room
Couldn’t u do 2 back to back to fit a full car?
Every mob boss has one of these "painting booths" in their garage.
😂😂😂
@@CarOps you send laughing faces, but I'm far from kidding
How can i buy thiss😊
Why not a full car?! might as well. I have seeing people do worst.
now where does your car and tools go?
How much for the tent and materials?
You can use 2×4 frame for about 50 bucks and the thicker mil plastic is about 20 bucks. We make these for our tile jobs. Except we put nice tarp under everything as well because wet saws get everywhere. You can get some clamps to hang things from and vent it where you want. Clients are very happy when you don't get crap everywhere.
So sick I love this
Thank you!
The make them so you don’t have to build it like this. I’ve seen at Home Depot
Bro you was serious about this paint both
I’m telling you now just get a proper booth this is a hazard bro looks cool but protect your health
Definitely not a full car...unlesss lol jk
100% illegal
Your profile pic is cringe