Once you're used to it, you know how to control, and how much power to give and forward force. Initially yeah, especially if you're beginner may be you strip away the screw head. The black colored anti corrosion screws work well, they don't slip off the tip. And use Bosch driver bit, that lasts longer than local in box driver bits
This was the exact review and tutorial I was looking for and that I have ordered I bell ID 13 - 75. Which is a keyed chuk. I as to me it more convenient than key less. Rest all viz. Powe 650 watt, Rpm all are same. Hope I took a fair decision. Pls comment.
I think it's good decision. While working with concrete and metal, i experienced the drill bit getting loose by itself in keyless chuck. Keyed chuck is better for metal and concrete works. For frequent changing of bits I chose keyless chuck. Back then keyed chuck model wasn't available, i think recently they launched it.
Yes sparks are visible, but that didn't affected its functionality though. I'll make a video on that, its due to carbon brush surface wear, and free play of carbon brush, And the plastic body vents make the sparks visible.
Yes they are different. Hardness is different for metal, concrete and wood drilling bits. A woodworking bit will wear off quickly on metal or concrete. They differ in flute shape, metal drilling bits are more shiny than woodworking bit or concrete bits. You'll understand once you start using them. Concrete bits don't have fine sharp ends like of metal bits and wood working bits as they're designed for impact drilling function
Thanks 🤗❤️. The drill is still functioning well after a year, I changed its cable coz i mistakenly damaged it. If you have heavy concrete drilling need then go for a rotary hammer drill. The drill I've reviewed is good for medium and light duty works for home and diy needs. I've used it for some medium level concrete drilling works such as installation of exhaust fans, etc...
@@MECHTOYSOFFICIAL thanks sir. Then, i hope it will be good enough for households works,, about cement wall too, , cause , household is not too heavy works.
For quick drill bit change keyless is convenient. But drill bit get loosen after few mins of drilling especially metals. In wood working and concrete it's not an issue. In keyed chucks you can tighten it as your wish, keyless only hand tight.
Thank you for the feedback. In my experience,the toolkit is cheaper online when compared to shops. Cross check Flipkart and amazon, choose the best deal
@@MECHTOYSOFFICIAL Bro. I called ibell customer care. They are telling to use it for three days. Even after that if there is Spark, they told to return it.
Expensive drills hide it better such as Bosch, makita,etc. In iBell's minimal body, sparks can be seen, it's not a problem unless it's causing any performance issues, weird noise, electric shock,etc... There can be manufacturing defects too, observe it...and if it's a problem then Return.
It's a general purpose drill, not specifically designed for screw driving. There's no torque control clutch. So if u push trigger too much, it'll give excess torque, and may wear out screw heads. It can be used though. Go for an impact driver if your only application is driving screws. Impact drivers offer better control of torque
I was expecting the how to fit bit in machine, today i got my order this machine. And still i confused for how to fit bit in machine and excite for use. 😥
Its easy bro, just turn the black part of chuck holding the chuck base. Never use SDS drill bits, some people unknowingly use sds, they will damage the chuck and also slips off everytime.
No. Every drill has main bearing on spindle shaft. Depending upon the usages it wears out over time and cause wobbling like motion, excessive vibrations etc. My drill has no wobling issues yet.
yah drill machine ka box bahut hi bekar hai yah Maine Manga tha to mujhe yah pasand bilkul nahin aaya kyunki iski bich Tut gai hai aur mujhe bilkul bhi achcha nahin lagaya box to aap video per Vishwas Na karke aur is video ko yah is message ko like Karen aur aap log yah Gaur kariye ki main box mar gaya tha maine video upload bhi kiye per mujhe box bilkul achcha nahin Laga hai to use
My box is still fine. Quality isn't top notch, but just fine for the price. You could return the product in 10 days🤷🏻♂️ drill bit quality i already said in the video that isn't good.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Does the absence of clutch cause any problems while screwing ? Like stripping off the screw head?
Once you're used to it, you know how to control, and how much power to give and forward force. Initially yeah, especially if you're beginner may be you strip away the screw head. The black colored anti corrosion screws work well, they don't slip off the tip. And use Bosch driver bit, that lasts longer than local in box driver bits
This was the exact review and tutorial I was looking for and that I have ordered I bell ID 13 - 75. Which is a keyed chuk. I as to me it more convenient than key less. Rest all viz. Powe 650 watt, Rpm all are same. Hope I took a fair decision. Pls comment.
I think it's good decision. While working with concrete and metal, i experienced the drill bit getting loose by itself in keyless chuck. Keyed chuck is better for metal and concrete works. For frequent changing of bits I chose keyless chuck. Back then keyed chuck model wasn't available, i think recently they launched it.
For home use which should I buy ibell or bosch
bro are you getting any sparks while using it at high speed
Yes
@@MECHTOYSOFFICIAL but is it safe to use
Yes safe, but never use near inflammable substances like lpg cylinders, paint solvents, fuels,etc. Avoid usage near water or with wet hands.
There are some reviews showing lot of sparks in this drill plz help
Yes sparks are visible, but that didn't affected its functionality though. I'll make a video on that, its due to carbon brush surface wear, and free play of carbon brush, And the plastic body vents make the sparks visible.
Is there separate drill bit for concrete , wood and metal ?? If is there, then tell me how to identify them ..
Yes they are different. Hardness is different for metal, concrete and wood drilling bits. A woodworking bit will wear off quickly on metal or concrete. They differ in flute shape, metal drilling bits are more shiny than woodworking bit or concrete bits. You'll understand once you start using them. Concrete bits don't have fine sharp ends like of metal bits and wood working bits as they're designed for impact drilling function
Nice review sir.
Does it's still work good after a year,,
Do you recommended for us ,for concrete drill.
Thanks 🤗❤️. The drill is still functioning well after a year, I changed its cable coz i mistakenly damaged it. If you have heavy concrete drilling need then go for a rotary hammer drill. The drill I've reviewed is good for medium and light duty works for home and diy needs. I've used it for some medium level concrete drilling works such as installation of exhaust fans, etc...
@@MECHTOYSOFFICIAL thanks sir.
Then, i hope it will be good enough for households works,, about cement wall too,
, cause , household is not too heavy works.
While drilling Should we use normal mode for Concrete walls....
Use only impact mode on concrete walls, otherwise it won't drill fast
@@MECHTOYSOFFICIAL Yes bro After watching your video... I have tried now it's working fine....
Glad ❤️😊👍
It's lock switch is not working for me or I am doing ti wrong?
First press the trigger, then lock switch. Then rotate the small dial clockwise.
Sparking inside of drill mechine is it common or any problem
Yes it's normal. Happens with any brushed motor. You can observe similar sparks through the vent holes of a mixer grinder.
Bro 20mm wood ko hole kar sakega pls reply me
Yes bro, you can drill 20mm hole in wood using either a spade bit, circular saw blade, or fostner bit. They're available in tool hardware shops.
Chuck available hoga
Nice review. which is best bro keyless or keyed?
For quick drill bit change keyless is convenient. But drill bit get loosen after few mins of drilling especially metals. In wood working and concrete it's not an issue. In keyed chucks you can tighten it as your wish, keyless only hand tight.
V can add glass drell in it ?
Yes, by using diamond coated core bits along with proper water cooling you can drill into glass, marble,etc
Your videos are very helpful..👍....
Is the tool kit available at cheaper rate online or direct from shop?
Thank you for the feedback. In my experience,the toolkit is cheaper online when compared to shops. Cross check Flipkart and amazon, choose the best deal
What is minimum bit can be used
I've used 3mm and above, but i guess a 2mm diameter drill bit is also compatible
@@MECHTOYSOFFICIAL Also what is length of cable
Am confused with Bosch model and ibell. I don't have price constrains.
If price isn't an issue, Bosch GSB 13 RE gives almost same specs
@@MECHTOYSOFFICIAL What is cable length in Bosch and ibell
@@MECHTOYSOFFICIAL Bosch GSB 13 Re is possible for concrete drilling
Maximum kitnay mm bit used kar saktay hai
13mm
Hi bro. There is Spark inside drill machine while using it. Is it normal?
Yes bro, it's normal
@@MECHTOYSOFFICIAL Bro. I called ibell customer care. They are telling to use it for three days. Even after that if there is Spark, they told to return it.
Expensive drills hide it better such as Bosch, makita,etc. In iBell's minimal body, sparks can be seen, it's not a problem unless it's causing any performance issues, weird noise, electric shock,etc... There can be manufacturing defects too, observe it...and if it's a problem then Return.
@@MECHTOYSOFFICIAL ok bro. Thanks
Bro this is machine is good for screw driving applications?
It's a general purpose drill, not specifically designed for screw driving. There's no torque control clutch. So if u push trigger too much, it'll give excess torque, and may wear out screw heads. It can be used though. Go for an impact driver if your only application is driving screws. Impact drivers offer better control of torque
Very good review
Thank you friend🤗♥️
Gud
Thank You
I was expecting the how to fit bit in machine, today i got my order this machine. And still i confused for how to fit bit in machine and excite for use. 😥
Its easy bro, just turn the black part of chuck holding the chuck base. Never use SDS drill bits, some people unknowingly use sds, they will damage the chuck and also slips off everytime.
@@MECHTOYSOFFICIAL thanks for help me, but is it china model? 1 of my building friend was telling me that its china model of ibell drill machine.
Not poor, worst.
My 2 steel bits broke down in the matter of 5 mins
Its costing 1000/- more now.I am never able to use the screw unscrew mode properly.😭😭😭😭
What happened?
@@MECHTOYSOFFICIAL Sorry For the late reply. It Just jumps all ove the place while trying to tighten a screw or loosen it. Any pointers?
You mean the triger switch is not in precise control? Like sudden spike in power than you applied? Or the chuck has eccentricity (wobling )?
@@MECHTOYSOFFICIAL Actually more like extra power...but wait?? Does the Chuck of Ibell get wobbely ??? I mean is this like a generic fault.
No. Every drill has main bearing on spindle shaft. Depending upon the usages it wears out over time and cause wobbling like motion, excessive vibrations etc. My drill has no wobling issues yet.
Which language are you speaking,, you are using English words,,, please make video in English or with English subtitles
I'm speaking french🙂
yah drill machine ka box bahut hi bekar hai yah Maine Manga tha to mujhe yah pasand bilkul nahin aaya kyunki iski bich Tut gai hai aur mujhe bilkul bhi achcha nahin lagaya box to aap video per Vishwas Na karke aur is video ko yah is message ko like Karen aur aap log yah Gaur kariye ki main box mar gaya tha maine video upload bhi kiye per mujhe box bilkul achcha nahin Laga hai to use
My box is still fine. Quality isn't top notch, but just fine for the price. You could return the product in 10 days🤷🏻♂️ drill bit quality i already said in the video that isn't good.
Made in china