Fluval covers the features and benefits of the FX6 High Performance Canister Filter, while providing simple setup instructions. To learn more: fluvalaquatics....
Hey, thanks for the video! For those of you interested in buying a fluval fx6, I just bought one. Here is my 1hr experience: SUPER easy to set up Extremely Quiet once running. Just the dull hum of a motor This video has three areas where it lacks full info: (1) When they put the canister under the tank and say turn it on, the valves where the in and out tubes go are in the horizontal position. They need to be in the VERTICAL position to work. (2) You unit might run for 30 seconds and then it will turn off all by itself...you will be confused...the unit is only try to get air out of the system and will resume running after a painful 2-3minutes, don't worry like I did. It may turn off and on a couple of times in order to evacuate all the air. (3) If you are going to do activated carbon, its easier to place in the unit before you go through the trouble of getting it all set up. I agree with people that this is expensive, but fluval has great customer service and many replaceable parts as well as a warranty so I expect this to run for a long time. Best of luck!
UPDATE: so i've been using it for 3 weeks now...I can't say anything bad about it. It is still so frickin quiet and the tank looks perfectly clear (110gallon). It comes with jet blowers on the output side so you get good water movement through the tank. I've moved them a couple of times to mix up deadzones/make it more interesting for the fish. Would recommend to something without a tight wallet. No experience with cheaper makes like Sunsun to give a fair comparison.
just got my new fx6. they got rid of the indicator dials on the top of the fx6. they have a hose holder now and they added in and out in white lettering on the lid to indicate inlet and outlet. very nice to have. I like it better with this design. good job fluval.
I bought my a few days ago and set up yesterday Monday Feb 5th and what a great difference ... super quiet, the set up was so easy, got caught when I turned it on and suddenly it stopped lol I unplugged and plugged it back in .... the it turns off on it's own again !!! Then I remember this thing is now "smart" lol oh wow .... I left it alone lol it works wonders removing the bubbles from canister to minimise noise, etc .... any how ... I like it ... I had a marineland 350 (very noisy)
This filter is going to make my life a hell of a lot easier. The tank I got that’s 12 months old has two sponge filter and a really loud cannnister filter.
I used the fx5 for years, great canister filter, probably the best of its time. Everything was well made and the motors on these Hagen machines are robust and long lasting. I used mine on marine aquarium and installed my own media. I added carbon and bio media and wool. I imagine you could us it as a sump pump, I don't see why not.
Mine is setup a bit different than stock. I have biological media in all the trays. I use Seachem Matrix (a total of 3.5lbs) in the canister. The 1st tray also has 3 filters (course-Black, medium-blue and fine-white). The last tray has the thin Black filter at the bottom just in case to prevent any of the media from entering the pump and 2 Seachem Purigen packs. Additionally, I've recently installed a 90* PVC adaptor to replace the dual output nozzle for a more directed water flow. The filter is used on a 125g cichlid tank and I am quite happy with the filter, despite what the interweb has to say about it. It's been running constantly for 4 years now and quiet as a church mouse.
I just set this up in my yellow bellied slider’s tank in 30 minutes. I’m actually shocked how easy it was to do (and I am rubbish at anything technical). I can’t tell you how delighted I am with it. I’ve had serious issues with a much cheaper brand that just hasn’t been doing it’s job. Set this up and 2 hours later I had a crystal clear tank and a very happy turtle. It’s well worth the cost (I hope).
@@ch1m3ra42 Phenomenal! We had one ‘yikes moment’ when it stopped working 18 months ago, but I managed to clear a lot of muck out of the fan and it immediately kicked back into life. My gorgeous boy, Albert, is about to move up to an inbuilt pond (DIY children’s swimming pool in what used to be my office) because he’s outgrown his big tank so I’ll have to get a second one. Wouldn’t hesitate. It’s the one piece of turtle equipment that is flawless and hasn’t let us down. I can’t recommend enough.
Great work guys.- Let’s work on “comfort in relation”. Remember, this should be fun and interesting. Getting sublet office vibes here.. Let’s work on “loosing up”. ~A.
I have both your fx4 and fx6 on my 125 filters are great media has to change. I replaced all media that came with these filter. Also might wanna think about changing the plastic hose that comes with filters just food for thought 💭 great products price is alittle high but hey that’s life. Thinking of buying your uv sterilizer
My FX5 filters great but the weakest link was the lid knobs. I've had to replace them 2 times now over a 5 year period. The orange plastic material did not hold up. It dry rots and crumbles after about 2 years. The pump is clearly out of waranty by then but it is rediculous that they charge $80 for a new set. Thats $160 so far for something that should never have to be changed and in about a year I'll have to fork up another $80 because these will start breaking around that time.
This is not acceptable. For that money you could have already bought a quality filter like...erm Eheim.. Just kidding. Hope Fluval has fixed this with the FX6.
i love this filter but the way you guys showed how to install the hoses to the rim of the tank was easy on that tank but i thought i was going to brake them trying to install on my aquarium could not even use the suction cups with them on made it impossible to install hope you guys come up with a easier way to install on a aquarium with a trim on it.
Not just the hoses general setup is a bit more difficult than what they show for sure. I'm not saying it's a difficult setup, it's fairly easy but if you're not careful you'll have water all over the place.
Dear Fluval, As I can call myself an owner of 2 beautiful Fluval FX6. I am getting in touch with the upcoming use of UV-C. Ae you guys planning to produce UV-C light that can be used with these amazing filters of yours? If not, do you have any advise which one is good to use in combination as the pipes are different from the common canister filters. Many thanks
This filter is truly epic. Running this on my 180 gallon and it's a work horse. Unsurpassed quality and effectiveness, couldn't be more satisfied! Thanks Fluval. If anyone has any doubts look at my water conditions and Cichlid health on my RUclips channel.
So upon hooking up my fluval fx6 the pump leaked profusely. I check the only o ring and it was bent out of shape badly. Causing my prime to be lost and having water all over my floor. Good job fluval quality control. Bad design only have one o ring on the pump to filter canister housing
We regret your re-installation did not go as planned, however we stand by our effective design. In a recent video, we directly address the pump and show O-ring placement for the FX6. (View at the 5:40 mark) ruclips.net/video/sH67b_KlD-U/видео.html
I've used a Fluval 404 for 36 years and still working in mind condition. I then purchased a 306 about 10 months ago and just two days ago I purchased another Fluval, a 207. I also have a Iheim canister filter that is 38 years old and still working. Although, I can't dispute on the incredible quality and design of Iheim filters. But when I purchased the Fluval 404 from Highett Aquarium 36 years ago (since 1986), I realised the quality of Fluval was just as good as Iheim. I mean, it worked and worked with impellers life lasting from 4 years and now, 2-3 years the most. I can tell this when I start to hear the droning of the impeller because after many months of rotation the magnetic impeller hole starts to wear out and widen to cause vibration while the ceramic shaft is still intact to add a new impeller. However, on the 404, both impeller and ceramic shaft wear about the same time in or around 4 and half years. According to my observation now as a Fluval fan, the earlier models are the best and I will look forward in keeping the 404 going for a number of year in the future. What a great canister. However, When I purchased the 306 and installed on another tank, the first thing I noticed was the dripping of water at the point where the filtered water returned back in the tank. I don't know what the part's name is but the tip has a widened mouth so that the water coming out is spread a little. I removed that because of the leak. The water return part is bent and has the flexible water pipe connected to this part, which the top of the part is removable. That's where it leaks. This part has what looks like a lid/cap pressed on it and is removable. The second fault is a leak somewhere in the IN/OUT valves. If I turn both valves (as both turn at the same time due to design) more than half the flow, the right valve starts to leak at the side, suggesting that a faulty or pinched O rings is the problem. So, I cannot open more than half the flow or it will leak. I reported this to my local Aquarium store and was given a new valve system. But, generally this fault shouldn't be there. Another reason why 404 is still the best and works and works without problems. I recently purchased another Fluval filter, a 207 (10-11-2022) and started to check it up for missing parts and/or quality. I was immediately disappointed when I saw that the baskets inside the canister were of poor quality. In fact, compared to a product made in the 88's, the 404, The baskets in the 207 are and not seated one on top the other in a sealed fashion, whereas, the 404 baskets are tighter fitted to make sure the water from the tank going through these basked to be filtered does not escape between the little gaps between one basket and the others. But I like the idea of having a long tongue where you can lift the baskets all at once. However, the design and installation of the tongue (inside each basket) is making the filter mediums and sponges not sitting properly for a fully sealed fashion, so that water from the aquarium is not escaping from those gaps and return back in the tank unfiltered (or not filtered properly). Another reason I an not happy with the Fluvals of today, cheaply made and by design, also in the water cleaning and filtering sense, 10% or more water returns to the tank unfiltered. Whereas, no problem with my old and trust 404, water is filtered to a point that leaves toy speechless at the crystal clear water in the tank, as if there is no water in it and the fish seem to float in the air. To close this comment, I would also like to add that the same return-back-to-tank part also has a removable cap that causes water to slow drip on the floor. It is certainly caused by water pressure as it is returned back to the tank. I reported this to my aquarium store and he is going to talk with the Fluval agent. So, all in all, see how products change. See how you start to see the quality is also failing? But, on RUclips, everyone makes a video in favour of Fluval. Sure, it is a great canister filter, but would today's Fluval canisters last you 36 years like my old and gutsy 404? Tell me, tell me. I want to hear what you have in mind. If RUclips was like G App that Google removed a few years back, where you could post photos and screenshots, I could have posted a couple of screenshots to show what the old 404 is doing today. Cheers 😉👍
mechanical on top, bio in the middle and chemical at the bottom. Is the bottom basket the last layer before leaving the filter? Ie does the water flow from top to bottom then out? I want to add some fine filter floss to polish at the last stage. Thanks loving my new filter.
Question? How does the water travel through the filter? I can’t seem to find a vid that shows or explains how the water is filtered. Just want to know so I can stack my media. Thanks
The water enters the outside of the media baskets, then traverses the foam surround media upwards to the top and then downwards through the media baskets, at the bottom of the media basket stack is the chamber that leads to the pump intake. The pump then pumps upward through the included inner canister output tube.
+zac logan A general rule of thumb is five to ten times the tank's volume per hour. However, the correct flow rate depends on your tank's needs. The best guide is to monitor your water quality and adjust the flow rate as needed. Also, take the size of the fish into consideration and make sre they can not get sucked into it and injured. :)
+Kenneth shaheen jr. Hello! The best guide is to monitor the water quality with regular ammonia, nitrite and nitrate testing. Also, ensure that the output nozzle(s) are moving the surface of the water such that it is being well oxygenated.
Hi Leon, the FX6 has a height of 23" so this might make it a tough fit. fluvalaquatics.com/ca/product/A219-fx6-high-performance-canister-filter/#.VGvFIPnF81I
Great video! Thanks ! What is best way to arrange filter media ? From lower floor to top? I been told sponge at the bottom and rest layers is ceramics.
Thank you! The FX series of filters has the incoming water flow through the foam surround pre-filter sponges then from the top of the media stack to the bottom under which the pump input is situated. The coarse filter media is best placed at top through to the finest filter media at bottom of the media baskets.
Swear by these, not cheap and not as easy to install as stated but you get the hang of it. I use these for large Slider Turtles, they create 3-4 times more waste than fish and water is still crystal clear. Only clean filters every three months, though it does need cleaning more often if using filter floss...personally I have not needed the floss. No leaks but I would strongly advise people watch you tube vids on stripping/cleaning/Lubricating and potentially replacing pump housing O-ring, I've not needed to do so yet but I strip and clean the whole thing every 12 months, check O-rings for deterioration and lubricate them with silicone lubricant (do same with impeller). Not doing maintenance could give way to leaks.
there was a loose o ring on the bottom of the inside of the filter. dose it go in the grove in the bottom of the inside of the canister? and yes the lid dose have its o ring on
Ok thanx, the water is very clear now, my fish stirred up some food debris by the in put them seconds later it's coming out of the out put, I have the stock media it came with and bags of carbon. I've emailed fluval and she tells me to clean the motor?
Where can I get a permanent mounting hose to screw onto the FX-6 purge valve, I have looked in many places but short of making my own I can't find one.
I have one of your fluvial 400 L Fishtank it has a built in filter it came with a 406 I would love to upgrade it to the fx4 but I can’t seem to do it I’ve added the 25 mil to my system but it just leaks could you maybe do a video explaining for people who have got a built in system how to do it
I recently bought a fluval canister filter and i stopped using it after two incidents i had with it . These we that both times the filter had leaked about 75 % of my 125 litre tank leaving my angle fish not really being able to move , and the filter did this twice so i stopped using it and went back to internal filters and i was disappointed with the product after hearing so many good reviews . A reply would be helpful and also advice Thank you
Hi yorkshireboy123, have you contacted our Customer Service dept, for assistance? They can help you in this matter. Here's how to reach them: www.fluvalaquatics.com/uk/fluval-support/
I have a question about fx6 inside of container we're the flow come out what's the Lil part of inside container it's a lil rubber part lost it need to replace it
I just bought a fx6 and the black hoes clamps won’t fit over the lip of my tank. Any suggestions??? Besides that I love it. Didn’t expect it to be so quiet.
Good morning, regular and sometimes severe voltage fluctuation occure in my country. Is a voltage stabilizer or surge protector required to protect the circuit board.
We are not familiar with your current situation but it does sound like the use of a surge protection device would be a prudent addition to your setup. This way you are guaranteed to avoid damage to any of your equipment.
The amount of chemical filter media depends on the aquarium volume and the particular pollutants, etc that you may have to remove. It may be necessary to purchase more of this type of filter media.
Hi thanks for the video, I am about to purchase the FX6 for an outdoor aquarium, I would like to have the glass bottom drilled so I can have the intake and out take hidden and coming through the floor instead of coming up over the back of the tank as its not very pleaseing to the eye. Can you tell me if this unit can work that way or will the pressure of all the water create an issue with the filer ?
The pressure is the same whether in either case, you would need to ensure how you have plumbed in that instance is secure. Also please visit fluvalaquatics.com to download the instruction manual which has maximum vertical hose placement specs for using this filter.
Correct! There are two generations of FX series filters - the first generation has dials on the top, whereas the second generation has clips to hold the drain valve tubing!
The filter is rated for up to 400 gallons, but obviously your fish load and size of species will play a part in whether or not one unit would suffice. Why not try 1 and see how it goes before investing in another unit?
Indeed, not only the size of the Tank is what counts, the number of fish and their size too, by the way I have several plants in the tank, some types of anubias... now i have 2 tetra ex1200 They are from my previous 150G tank, they are "ok" in the 250G but not as much as I want. Maybe 2 fx4 will be a better option than to gamble with 1 fx6
Good Day and thank you for your nice vedio. I am a fans of fluval and I have an FX 6 which great i use it for my 240 L for discus heavy stock . Now I want to buy new filter from fluval for my 500 L tank , what do you suggest shall I go for G6 series or fx 6,which model is the newest and the strong one between the two of them. Thank you. Nasir
@@fluval Good evening thank you for all your advises and your help. I already placed my order for 2nd fluval. I would like to have your advise about my old fx6 I bought it last February this year and I have a maintenance every 2 month and now my last cleaning was a month ago , but today I can see that the water flow is not strong at all , however when I cleaned it last month it was even not that much dirty please advise what could be the reason of low water flow . And how I should fix it? Thank you Nasir
I'm strongly considering getting an FX 6, but I am adamant i would like to continue using my brilliant BIOHOME media( which has unparalleled nitrite and nitrate removal ).Can I just ask, the way the FX6 is set up...?Does the flow through the media canisters go from the BOTTOM to the TOP before being sent back to the aquarium or is it TOP down to BOTTOM? Reason I ask is that to work 100% effectively, BIOHOME needs mechanical filtration ( waste particles etc ) before the water hits it ( the water should be particle free ).Many thanks for the help
Possibly a stupid question here, but I just bought my new saltwater tank, and pretty much everything else that I need. I'm wondering does this replace a Sump and Protein Skimmer? Or is it a separate item that you use to help filter the water.
Sethalos If you haven't purchased a protein skimmer, we advise you to do so. We're not entirely sure what you mean when you say replacement of sump and skimmer though. Can you offer more clarity?
Hi, I would check to make sure you are not overloading the filter media baskets, that the media is fairly clean, and that the filter hosing is relatively straight with downward loops or bends. If your foam filtration is over a year old, replacing it can help as well. Is this a marine or freshwater aquarium?
It's important to perform regular filter maintenance (media rinsing and replacement) to prevent media from compacting, which can result in air accumulation. Ensure the filter intake is not positioned near an airstone or any other source of air bubbles in the aquarium. Verify the integrity of the intake rubber hose connector that attaches to the intake siphon tube, as it does dry out over time and becomes hard and non-flexible, thus requiring periodic replacement. Also verify that the joint between the intake rubber hose connector and the intake siphon tube is positioned below the water surface. Lastly, ensure that all rubber gaskets and O-rings have been cleaned and lubricated with Fluval Silicone Lubricant (Item #A325), and that there are no kinks, loops, bends or turns in the hosing.
H Antonius vd Klis, I am curently checking on this for you, and will confirm shortly the availability of the FX6 in Vietnam. Thank you for your patience.
Thanks for this great service! I am also interested in LED lighting. I know Vietnam is importing aquarium pumps ans some LED lighting, but till now i only saw cheap reconstructed versions from China. As we all know then we can forget the quality...
Antonius vd Klis Hi, we've contacted our reseller for Southeast Asia, and they would like to speak with you directly to offer assistance with locating Fluval products in your country. Would you kindly email us at: info"at"fluvalaquatics"dot"com (Sorry, RUclips won't allow us to write in a formal email address, but you get the idea ;) Please include your telephone number in your email message and a best time to reach you. Thanks!
Thanks for the information. I will certainly mail to the mentioned address and see if its possible to purchase here. Thanks again for the great service.
Hi there! Yes, FX Series canister filters can be placed beside the aquarium rather than directly below it, provided the distance between the top of the canister and the water level is more than 8" / 20 cm and less than 59" / 150 cm. For the best filtration performance, ensure the hosing follows as straight of a path as possible, with no kinks or loops.
It says the filter pumps 925 gph and that it filters 563 gph. So after the water is filtered through media at 563 gph does it make its way back to the tank at 925gph?
Do the ceramic media need to go into the mesh bags? I have a new setup (~3 days, 75 gallon tank home of 1 RES turtle) and I see slight white residue/film on the top of the water. Also I am having an issue with micro bubbles, as it seems to be getting air into the system. If I unplug/plug it works fine for about 45 minutes then starts bubbling.
+dallas lamb First course of action is to always make sure to rinse media well before use. Ceramic media do not have to be contained in mesh bags. It is normal for the filter to eject air; the foam filter media will usually have to discharge trapped air for up to a few days after a new installation or maintenance. Turtles do create more of a mess, and the foods they consume do tear apart while they eat resulting in more surface film.
+FLUVAL Aquatics thanks! most of what I thought was film seem to be bubbles too so that part isn't too bad. it's only been 4 days and seems to be getting better so I will not worry and see how it goes in the next few days.
I have the fx6 canister for 3 weeks now, this is my 1st tank (120 gallons, african cichlids) my question is about filter cleaning , I see how to do it all but am wondering with the media, the one it came with and I added in another try Bio mass, does this get rinsed or just changed with new media ? im assuming the stuff i have in the nylon bags gets changed to new but cant find any info on media,,, also foam pads it came with, new or rinsed clean ? if theres any info on this please direct me to it. Thanks,
Water changes are necessary based on what you are keeping, start with twice a month at 20%. The same for filter maintenance, initially take the filter apart every two months and clean it as recommended, make sure to dose with Fluval Biological Enhancer after.
+June Arienette I have heard mixed answers to this question... some say yes- some say no. in my opinion I say no. If the filter is filled with water I don't see how the tank water will be allowed to escape. I have an FX6 I just keep in in a plastic Rubbermaid container incase of a leak... so far so good. Canisters are a good way to go.
I Love All Of fluval!! Im thinkin to go to the FX5. >> Question/s: 1. does it run at a Low full tank level. ? Say 10 inches or 12 inches Below top level of tank> the 405's do not. Can I use this for turtle tank where i keep h20 level at 3/4 full for Basking Ramp? Intrested to do so.PRASAP TY Much Fluval.
+utsuriman We haven't tested this but we don't think a few inches below would be an issue. On a related note, since you keep turtles, perhaps consider creating a custom basking area that is part of a terrestrial surround.. just food for thought. We'd be curious to know how that would work out!
Hi, as seeing you are professional about fluval filters, I have a fluval g3, it kept display the message 'conductivity out of range', and water doesn't flow synchronize. What should I do?
This is an alert and is covered in the G-Series Guide (page 33) that came with your filter. Here's an electronic version: www.fluval-g.com/pdf/Fluval-G-Series-Manual-EN.pdf
Hi Maria, goldfish are dirty fish therefore it is a good idea to provide them with a more powerful filter. The FX6 filters efficiently and effectively in up to 400US gallons. This would be a lot for your 45 gallon aquarium, our 07 line of canister filters would be a better option for you! 😊
Since posting this video we have updated the FX 6 to include the hosing holding clips for the new FX Graval washer and have removed the maintenance reminder knobs.
Make sure there are no kinks, loops, or bends in the hosing, as this can flow water flow. Also ensure the filter has been properly primed. We encourage you to contact our customer support team for more assistance: fluvalaquatics.com/us/contact-us/
Diego Bilotta Most likely you can, however it always depends on how many and what size fish you are keeping, your feeding program and other factors as well. If you would specify the species, the number of fish you have, and what you plan to feed,, we'll be more than happy to provide some input.
Yes absolutely, that is a good sized aquarium and the fish species you mention can handle good water movement, in fact they do better with good water flow. The output nozzles on the FX series of canister filters also effectively disperse water, thereby providing a natural water movement free of overly strong directed currents.
I have fx6 fresh new tank and water how long take water to get clear, does hose have to be straight up and down , 125 gallon the intake and outtake are in the corners,
+zac logan Hi zac, that would depend on the source of the cloudiness. New aquariums are often cloudy due to the decor and residual dust and debris that comes with that. Try fine filtration pads for a few days, and if it clears, then remove those pads and replace them. Having straight hosing does help with water flow, as does periodic maintenance of the hosing. Remember to remove the hoses a few times a year to give them a thorough rinsing.
There is a receiving groove that is clearly visible on the motor head area that inserts into the canister. Chemical filter media should be kept in the mid to top media baskets.
It will be fine in a 120 gallon aquarium. There are two discharge nozzles which can be directed independently and you can reduce flow the output valve. In our experience with adult discus in aquariums that size or greater no flow reduction will be called for. Most plecos prefer strong water flow. The platys will be ok.
Hi there! You probably have a more recent version of the FX6, which has clips for the Utility Valve hosing instead of water change and filter cleaning dials on top.
The intake should be fairly close to the bottom of the tank, while the output should be near the top, to provide vigorous surface agitation without splashing!
Hello, planning to buy this filter as a replacement for my broken eheim 3e 2078. However, I wonder whether I can use the current hoses (took a long time to install them under and through the aquarium bottom). What is the fluval hose diameter? Thanks very much.
Hi Alexander, we don’t suggest using your existing hoses. Instead, you should connect your Fluval FX6 with its stock hosing because it is ribbed specifically to facilitate installation. The ID of the FX6 rubber hosing fitting, which is fixed to the ribbed hosing is 24mm.
Hallo Fluval Aquatics! Ich hbe ein 200l Aqua kann ich den fx6 dafür nehmen oder ist der zu stark für das Aquaqrium? oder reicht es aus wenn ich den durchfluss drossel?
The best way is to vist fluvalaquatics.com ! Here is a link to the series page: fluvalaquatics.com/us/fx-series/ Versus the former generation this one has white canister locking knobs.
Just had a new Tank and Cabinet Delivered, Not sure if it will fit in Cabinet as I seem to read conflicting measurements depending on what site I look at. Fluval website gives Dimensions as (L x W x H): 37 X 37 X 58 CM (14.5 X 14.5 X 23 IN), so I am going with that, but I notice the lid is wider than the base and the motor sticks out a little more. Can anyone provide the measurements of the canister at its widest point and how much the motor sticks out by. Many Thanks
Hi Stewart, the width pump sticks out approx. 3.25 inches, so allow for at least 3.5 inches here. Total width at the widest point is approx. 17.5 inches so allow for at least an extra inch here. Some factors can affect the actual dimensions (i.e. canister lock down knobs protruding, etc.), so we hope this additional information helps.
installed new fx6 today. but its pump is not working continuously. like it runs for 3 mins and then motor stop for 10 to 15 minutes. please help. observing from last few hours
+Andrew Mclaughlan Yes, you can. However, be advised that as you reduce flow you are increasing pressure within the canister. We would advise to instead use the existing output nozzles to direct the output current to meet the water movement that you are seeking to adjust.
+Fluval Aquatics not quite sure what you mean? I'll be putting it on a 260 litre tank with red bellied piranhas in it. I thought it would be possible to reduce the input and output without any damage to the filter itself?
+Andrew Mclaughlan We are suggesting that you be cautious, because if you reduce the flow enough and your filter is at the maximum distance specified from the waters’ surface, the pressure increase can create some risk. With that being said, thanks for letting us know that you have Piranhas in a 260L aquarium. These fish will appreciate the water movement, and you can certainly use your FX6 at full flow and direct at least one output such that you are using one nozzle to create good surface movement in order to support better oxygen levels.
When feeding it is a good idea to feed small amounts allowing fish to consume all the food before putting in the next portion, if fish are fed in small offers then there is no need to shut the filter down. When it comes to bottom feeders the fact that the food is on the bottom should suffice. in preventing it from entering the filter.
quick question... This is the first video I have seen by Fluval Aquatics.... I saw how you attached the hose to the top of the tank, but I have a plastic rim that goes all the way around.. i believe mine is an Aqueon 75 gallon... I already have a Trigger Systems 39 Sapphire hooked up to my aquarium. I want to add a canister filter and it looks like this is the industry standard.......BUT, is there another way to assemble for a tank with a lip around the top? Have you produced other videos about this product? Link? thanks for your help
@@fluval thanks for getting back so fast... it's that plastic rim that goes around the top of my aquarium to keep it from bowing out and the seals from bursting
Can you give me the exact dimensions of the media baskets? I want to know the diameter and depth. In metric if you please. I have some foam pieces laying around and want to know how they will fit.
Hi there, please send an email to our customer service team who will be glad to provide you with the dimensions that you are looking for! fluvalaquatics.com/us/contact-us/
I want to get the FX6...but not sure if it will fit under my 75 Gallon. The stand doors are only 14 inches wide...does anyone know if it can fit if I take the lid off?
You will find the specs for the FX at fluvalaquatics.com, please use this link for your convenience: www.fluvalaquatics.com/ca/product/A219-fx6-high-performance-canister-filter/#.XEihE1VKiUk
my left ear thanks you for the information
Hey, thanks for the video! For those of you interested in buying a fluval fx6, I just bought one. Here is my 1hr experience:
SUPER easy to set up
Extremely Quiet once running. Just the dull hum of a motor
This video has three areas where it lacks full info: (1) When they put the canister under the tank and say turn it on, the valves where the in and out tubes go are in the horizontal position. They need to be in the VERTICAL position to work. (2) You unit might run for 30 seconds and then it will turn off all by itself...you will be confused...the unit is only try to get air out of the system and will resume running after a painful 2-3minutes, don't worry like I did. It may turn off and on a couple of times in order to evacuate all the air. (3) If you are going to do activated carbon, its easier to place in the unit before you go through the trouble of getting it all set up.
I agree with people that this is expensive, but fluval has great customer service and many replaceable parts as well as a warranty so I expect this to run for a long time.
Best of luck!
UPDATE: so i've been using it for 3 weeks now...I can't say anything bad about it. It is still so frickin quiet and the tank looks perfectly clear (110gallon). It comes with jet blowers on the output side so you get good water movement through the tank. I've moved them a couple of times to mix up deadzones/make it more interesting for the fish. Would recommend to something without a tight wallet. No experience with cheaper makes like Sunsun to give a fair comparison.
just got my new fx6. they got rid of the indicator dials on the top of the fx6. they have a hose holder now and they added in and out in white lettering on the lid to indicate inlet and outlet. very nice to have. I like it better with this design. good job fluval.
I bought my a few days ago and set up yesterday Monday Feb 5th and what a great difference ... super quiet, the set up was so easy, got caught when I turned it on and suddenly it stopped lol I unplugged and plugged it back in .... the it turns off on it's own again !!! Then I remember this thing is now "smart" lol oh wow .... I left it alone lol it works wonders removing the bubbles from canister to minimise noise, etc .... any how ... I like it ... I had a marineland 350 (very noisy)
This filter is going to make my life a hell of a lot easier. The tank I got that’s 12 months old has two sponge filter and a really loud cannnister filter.
I used the fx5 for years, great canister filter, probably the best of its time. Everything was well made and the motors on these Hagen machines are robust and long lasting. I used mine on marine aquarium and installed my own media. I added carbon and bio media and wool. I imagine you could us it as a sump pump, I don't see why not.
I've had mine for 6mnths now and had no problems ,very good filters
Mine is setup a bit different than stock. I have biological media in all the trays. I use Seachem Matrix (a total of 3.5lbs) in the canister. The 1st tray also has 3 filters (course-Black, medium-blue and fine-white). The last tray has the thin Black filter at the bottom just in case to prevent any of the media from entering the pump and 2 Seachem Purigen packs. Additionally, I've recently installed a 90* PVC adaptor to replace the dual output nozzle for a more directed water flow. The filter is used on a 125g cichlid tank and I am quite happy with the filter, despite what the interweb has to say about it. It's been running constantly for 4 years now and quiet as a church mouse.
love this filter!!!!! IT's amazing! Being my first cannister, it's been such an easy filter, and so self explanatory.
Good stuff! We feel it is very intuitive filter to set up as well, we are glad to hear you appreciate the effort that went into it!
I just set this up in my yellow bellied slider’s tank in 30 minutes. I’m actually shocked how easy it was to do (and I am rubbish at anything technical). I can’t tell you how delighted I am with it. I’ve had serious issues with a much cheaper brand that just hasn’t been doing it’s job. Set this up and 2 hours later I had a crystal clear tank and a very happy turtle. It’s well worth the cost (I hope).
How has it held up with the turtle?
@@ch1m3ra42 Phenomenal! We had one ‘yikes moment’ when it stopped working 18 months ago, but I managed to clear a lot of muck out of the fan and it immediately kicked back into life. My gorgeous boy, Albert, is about to move up to an inbuilt pond (DIY children’s swimming pool in what used to be my office) because he’s outgrown his big tank so I’ll have to get a second one. Wouldn’t hesitate. It’s the one piece of turtle equipment that is flawless and hasn’t let us down. I can’t recommend enough.
Great work guys.- Let’s work on “comfort in relation”. Remember, this should be fun and interesting. Getting sublet office vibes here.. Let’s work on “loosing up”. ~A.
Hi there! This video is almost 9 years old - our content has changed pretty significantly since then! 😅
I just bought an fx6 and I love it thanks fluval 😁
I have both your fx4 and fx6 on my 125 filters are great media has to change. I replaced all media that came with these filter. Also might wanna think about changing the plastic hose that comes with filters just food for thought 💭 great products price is alittle high but hey that’s life. Thinking of buying your uv sterilizer
Can you give me a measurement of the fx6 canister width not including the pump? Thank you
My FX5 filters great but the weakest link was the lid knobs. I've had to replace them 2 times now over a 5 year period. The orange plastic material did not hold up. It dry rots and crumbles after about 2 years. The pump is clearly out of waranty by then but it is rediculous that they charge $80 for a new set. Thats $160 so far for something that should never have to be changed and in about a year I'll have to fork up another $80 because these will start breaking around that time.
This is not acceptable. For that money you could have already bought a quality filter like...erm Eheim.. Just kidding. Hope Fluval has fixed this with the FX6.
Thank you!
Cool im considering getring this ext caniter for my new tanks
i love this filter but the way you guys showed how to install the hoses to the rim of the tank was easy on that tank but i thought i was going to brake them trying to install on my aquarium could not even use the suction cups with them on made it impossible to install hope you guys come up with a easier way to install on a aquarium with a trim on it.
Jay San True, harder than shown.
Not just the hoses general setup is a bit more difficult than what they show for sure. I'm not saying it's a difficult setup, it's fairly easy but if you're not careful you'll have water all over the place.
This is with all canister filters
I'm not sure what is so difficult in the setup. It's pretty straight forward.
good constructions , powerful
only a few filter media can hold it in relation to the performance, in my humble opinion.
I loved the five-FX5
Dear Fluval,
As I can call myself an owner of 2 beautiful Fluval FX6. I am getting in touch with the upcoming use of UV-C. Ae you guys planning to produce UV-C light that can be used with these amazing filters of yours? If not, do you have any advise which one is good to use in combination as the pipes are different from the common canister filters. Many thanks
This filter is truly epic. Running this on my 180 gallon and it's a work horse. Unsurpassed quality and effectiveness, couldn't be more satisfied! Thanks Fluval. If anyone has any doubts look at my water conditions and Cichlid health on my RUclips channel.
Could I use this on a 210? Should I also add a hang on the back filter?
@@philmannino4567 Definitely, I use the Aquaclear 110 HOB with filter floss for fine particle removal for water polishing.
@@maximusaquatics7835 thank you
@@maximusaquatics7835 is it better for me to have two canister filters? And a Hob? Tia
@@philmannino4567 IMO you really can't over filter. I run 2 with a HOB on my 180 & my 125.
So upon hooking up my fluval fx6 the pump leaked profusely. I check the only o ring and it was bent out of shape badly. Causing my prime to be lost and having water all over my floor. Good job fluval quality control. Bad design only have one o ring on the pump to filter canister housing
We regret your re-installation did not go as planned, however we stand by our effective design. In a recent video, we directly address the pump and show O-ring placement for the FX6. (View at the 5:40 mark) ruclips.net/video/sH67b_KlD-U/видео.html
I've used a Fluval 404 for 36 years and still working in mind condition. I then purchased a 306 about 10 months ago and just two days ago I purchased another Fluval, a 207. I also have a Iheim canister filter that is 38 years old and still working. Although, I can't dispute on the incredible quality and design of Iheim filters. But when I purchased the Fluval 404 from Highett Aquarium 36 years ago (since 1986), I realised the quality of Fluval was just as good as Iheim. I mean, it worked and worked with impellers life lasting from 4 years and now, 2-3 years the most. I can tell this when I start to hear the droning of the impeller because after many months of rotation the magnetic impeller hole starts to wear out and widen to cause vibration while the ceramic shaft is still intact to add a new impeller. However, on the 404, both impeller and ceramic shaft wear about the same time in or around 4 and half years. According to my observation now as a Fluval fan, the earlier models are the best and I will look forward in keeping the 404 going for a number of year in the future. What a great canister.
However, When I purchased the 306 and installed on another tank, the first thing I noticed was the dripping of water at the point where the filtered water returned back in the tank. I don't know what the part's name is but the tip has a widened mouth so that the water coming out is spread a little. I removed that because of the leak. The water return part is bent and has the flexible water pipe connected to this part, which the top of the part is removable. That's where it leaks. This part has what looks like a lid/cap pressed on it and is removable.
The second fault is a leak somewhere in the IN/OUT valves. If I turn both valves (as both turn at the same time due to design) more than half the flow, the right valve starts to leak at the side, suggesting that a faulty or pinched O rings is the problem. So, I cannot open more than half the flow or it will leak. I reported this to my local Aquarium store and was given a new valve system. But, generally this fault shouldn't be there. Another reason why 404 is still the best and works and works without problems.
I recently purchased another Fluval filter, a 207 (10-11-2022) and started to check it up for missing parts and/or quality. I was immediately disappointed when I saw that the baskets inside the canister were of poor quality. In fact, compared to a product made in the 88's, the 404, The baskets in the 207 are and not seated one on top the other in a sealed fashion, whereas, the 404 baskets are tighter fitted to make sure the water from the tank going through these basked to be filtered does not escape between the little gaps between one basket and the others. But I like the idea of having a long tongue where you can lift the baskets all at once. However, the design and installation of the tongue (inside each basket) is making the filter mediums and sponges not sitting properly for a fully sealed fashion, so that water from the aquarium is not escaping from those gaps and return back in the tank unfiltered (or not filtered properly). Another reason I an not happy with the Fluvals of today, cheaply made and by design, also in the water cleaning and filtering sense, 10% or more water returns to the tank unfiltered. Whereas, no problem with my old and trust 404, water is filtered to a point that leaves toy speechless at the crystal clear water in the tank, as if there is no water in it and the fish seem to float in the air.
To close this comment, I would also like to add that the same return-back-to-tank part also has a removable cap that causes water to slow drip on the floor. It is certainly caused by water pressure as it is returned back to the tank. I reported this to my aquarium store and he is going to talk with the Fluval agent. So, all in all, see how products change. See how you start to see the quality is also failing?
But, on RUclips, everyone makes a video in favour of Fluval. Sure, it is a great canister filter, but would today's Fluval canisters last you 36 years like my old and gutsy 404? Tell me, tell me. I want to hear what you have in mind. If RUclips was like G App that Google removed a few years back, where you could post photos and screenshots, I could have posted a couple of screenshots to show what the old 404 is doing today. Cheers 😉👍
I bought the fx6 off Amazon, how come mine don't have a dial to remind me when to do changes.
Hi there! FX Series canister filters used to have dials on the cover, but the newest versions include clips to hold the utility hosing instead!
mechanical on top, bio in the middle and chemical at the bottom. Is the bottom basket the last layer before leaving the filter? Ie does the water flow from top to bottom then out? I want to add some fine filter floss to polish at the last stage. Thanks loving my new filter.
The flow enters at the top and flows down through the media where it is pumped back to the aquarium.
Question? How does the water travel through the filter? I can’t seem to find a vid that shows or explains how the water is filtered. Just want to know so I can stack my media. Thanks
The water enters the outside of the media baskets, then traverses the foam surround media upwards to the top and then downwards through the media baskets, at the bottom of the media basket stack is the chamber that leads to the pump intake. The pump then pumps upward through the included inner canister output tube.
You can feel and see water flow but how strong should the output be, I just want to make sure it's at its maximum performance
+zac logan A general rule of thumb is five to ten times the tank's volume per hour. However, the correct flow rate depends on your tank's needs. The best guide is to monitor your water quality and adjust the flow rate as needed. Also, take the size of the fish into consideration and make sre they can not get sucked into it and injured. :)
+Kenneth shaheen jr. Hello! The best guide is to monitor the water quality with regular ammonia, nitrite and nitrate testing. Also, ensure that the output nozzle(s) are moving the surface of the water such that it is being well oxygenated.
Hi there I have a cupboard space of (H)23"x(W)15"x(D)17.5" Would a FX6 fit?
Hi Leon, the FX6 has a height of 23" so this might make it a tough fit.
fluvalaquatics.com/ca/product/A219-fx6-high-performance-canister-filter/#.VGvFIPnF81I
Great video! Thanks ! What is best way to arrange filter media ? From lower floor to top? I been told sponge at the bottom and rest layers is ceramics.
Thank you! The FX series of filters has the incoming water flow through the foam surround pre-filter sponges then from the top of the media stack to the bottom under which the pump input is situated. The coarse filter media is best placed at top through to the finest filter media at bottom of the media baskets.
@@fluval appreciate explanation ! Thank you very much guys!
I have a Fx4 I want to put on my 20 long how can I get flow to not be so strong a spray bar or dial down flow but will it hurt pump doing that
Terri you can safely dial down the output by using the output valve on your filter, it will not damage the pump.
Swear by these, not cheap and not as easy to install as stated but you get the hang of it. I use these for large Slider Turtles, they create 3-4 times more waste than fish and water is still crystal clear. Only clean filters every three months, though it does need cleaning more often if using filter floss...personally I have not needed the floss. No leaks but I would strongly advise people watch you tube vids on stripping/cleaning/Lubricating and potentially replacing pump housing O-ring, I've not needed to do so yet but I strip and clean the whole thing every 12 months, check O-rings for deterioration and lubricate them with silicone lubricant (do same with impeller). Not doing maintenance could give way to leaks.
there was a loose o ring on the bottom of the inside of the filter. dose it go in the grove in the bottom of the inside of the canister? and yes the lid dose have its o ring on
Please contact our customer support team for assistance with this: fluvalaquatics.com/ca/contact-us/
Excellent video, well done! A lot of really good information, and a very good demonstration of the unit and how it works. 👍🏾
How does it work? Water flow within would help me set it up better. What do the individual pads do, and why are they set up in this manner?
Ok thanx, the water is very clear now, my fish stirred up some food debris by the in put them seconds later it's coming out of the out put, I have the stock media it came with and bags of carbon. I've emailed fluval and she tells me to clean the motor?
Where can I get a permanent mounting hose to screw onto the FX-6 purge valve, I have looked in many places but short of making my own I can't find one.
I have one of your fluvial 400 L Fishtank it has a built in filter it came with a 406 I would love to upgrade it to the fx4 but I can’t seem to do it I’ve added the 25 mil to my system but it just leaks could you maybe do a video explaining for people who have got a built in system how to do it
Great video. Just got mine. Posting an unboxing review on my channel. Thanks !
i purchased first fluval fx6 for my 125 gal
Nice!
The amount of media you put into the filter would do a ten gallon tank
I've never used anything like this at all what can you recommend for a 500ltr tank thanks
Bought an FX6 filter and it didn't come with a draining hose, do i need to buy it separately? and where can i buy it from?
I recently bought a fluval canister filter and i stopped using it after two incidents i had with it . These we that both times the filter had leaked about 75 % of my 125 litre tank leaving my angle fish not really being able to move , and the filter did this twice so i stopped using it and went back to internal filters and i was disappointed with the product after hearing so many good reviews .
A reply would be helpful and also advice
Thank you
Hi yorkshireboy123, have you contacted our Customer Service dept, for assistance? They can help you in this matter. Here's how to reach them:
www.fluvalaquatics.com/uk/fluval-support/
I have a question about fx6 inside of container we're the flow come out what's the Lil part of inside container it's a lil rubber part lost it need to replace it
We recommend you contact our customer support team about this: fluvalaquatics.com/us/contact-us/
I just bought a fx6 and the black hoes clamps won’t fit over the lip of my tank. Any suggestions??? Besides that I love it. Didn’t expect it to be so quiet.
What is the width of the frame of your aquarium?
Good morning, regular and sometimes severe voltage fluctuation occure in my country. Is a voltage stabilizer or surge protector required to protect the circuit board.
We are not familiar with your current situation but it does sound like the use of a surge protection device would be a prudent addition to your setup. This way you are guaranteed to avoid damage to any of your equipment.
@@fluval Thanks for the response. Does R.C. Hagen sell the circuit board as replacement parts?
I too only found the ceramic rings and no carbon media. Are we suppose to buy more media for chemical filtration?
The amount of chemical filter media depends on the aquarium volume and the particular pollutants, etc that you may have to remove. It may be necessary to purchase more of this type of filter media.
FLUVAL Aquatics
I added the biochem stars 20 Pack and a package of nitrazorb. Its going to be on a 125 gallon koi tank.
Hi thanks for the video, I am about to purchase the FX6 for an outdoor aquarium, I would like to have the glass bottom drilled so I can have the intake and out take hidden and coming through the floor instead of coming up over the back of the tank as its not very pleaseing to the eye. Can you tell me if this unit can work that way or will the pressure of all the water create an issue with the filer ?
The pressure is the same whether in either case, you would need to ensure how you have plumbed in that instance is secure. Also please visit fluvalaquatics.com to download the instruction manual which has maximum vertical hose placement specs for using this filter.
My G3 also shows "Low flow, see manual instructions ", what should I do?
Hey guys just want to know if you can adjust the flow rate on this filter?
Yes, you can reduce the flow by slightly closing the output valve.
This must of been an early design of the cap of the FX6 since mine doesn't have the dials to set the month I set it up for cleaning.
Correct! There are two generations of FX series filters - the first generation has dials on the top, whereas the second generation has clips to hold the drain valve tubing!
I have had pluval filters before, great filters! Will this on be good for a 250g/1000L tank With 50-60 cichlids? Or will a need 2 of them?
The filter is rated for up to 400 gallons, but obviously your fish load and size of species will play a part in whether or not one unit would suffice. Why not try 1 and see how it goes before investing in another unit?
Indeed, not only the size of the Tank is what counts, the number of fish and their size too, by the way I have several plants in the tank, some types of anubias... now i have 2 tetra ex1200 They are from my previous 150G tank, they are "ok" in the 250G but not as much as I want. Maybe 2 fx4 will be a better option than to gamble with 1 fx6
Good Day and thank you for your nice vedio.
I am a fans of fluval and I have an FX 6 which great i use it for my 240 L for discus heavy stock .
Now I want to buy new filter from fluval for my 500 L tank , what do you suggest shall I go for G6 series or fx 6,which model is the newest and the strong one between the two of them.
Thank you.
Nasir
Nasir, nice to hear from you, we without hesitation recommend the FX 6 for a 500L aquarium, especially with a higher stocking level of discus.
@@fluval thank you very much for your usual help. Nasir
@@fluval Good evening thank you for all your advises and your help.
I already placed my order for 2nd fluval.
I would like to have your advise about my old fx6 I bought it last February this year and I have a maintenance every 2 month and now my last cleaning was a month ago , but today I can see that the water flow is not strong at all , however when I cleaned it last month it was even not that much dirty please advise what could be the reason of low water flow .
And how I should fix it?
Thank you
Nasir
I'm strongly considering getting an FX 6, but I am adamant i would like to continue using my brilliant BIOHOME media( which has unparalleled nitrite and nitrate removal ).Can I just ask, the way the FX6 is set up...?Does the flow through the media canisters go from the BOTTOM to the TOP before being sent back to the aquarium or is it TOP down to BOTTOM? Reason I ask is that to work 100% effectively, BIOHOME needs mechanical filtration ( waste particles etc ) before the water hits it ( the water should be particle free ).Many thanks for the help
+Mark Pilgrim Hi Mark, the flow travels from the top to the bottom. The pump inlet is at the bottom of the media baskets.
Possibly a stupid question here, but I just bought my new saltwater tank, and pretty much everything else that I need. I'm wondering does this replace a Sump and Protein Skimmer? Or is it a separate item that you use to help filter the water.
Sethalos If you haven't purchased a protein skimmer, we advise you to do so. We're not entirely sure what you mean when you say replacement of sump and skimmer though. Can you offer more clarity?
I have had the fx5 for about 2 years. I have been seeing a lot of micro bubbles lately. Do you have any suggestions ?
Hi, I would check to make sure you are not overloading the filter media baskets, that the media is fairly clean, and that the filter hosing is relatively straight with downward loops or bends. If your foam filtration is over a year old, replacing it can help as well. Is this a marine or freshwater aquarium?
hello, i just finished installing my fx6 and its making some flucking noises and a lot of air bubble in my tank, please help
It's important to perform regular filter maintenance (media rinsing and replacement) to prevent media from compacting, which can result in air accumulation. Ensure the filter intake is not positioned near an airstone or any other source of air bubbles in the aquarium. Verify the integrity of the intake rubber hose connector that attaches to the intake siphon tube, as it does dry out over time and becomes hard and non-flexible, thus requiring periodic replacement. Also verify that the joint between the intake rubber hose connector and the intake siphon tube is positioned below the water surface. Lastly, ensure that all rubber gaskets and O-rings have been cleaned and lubricated with Fluval Silicone Lubricant (Item #A325), and that there are no kinks, loops, bends or turns in the hosing.
I live in Vietnam, hope i can buy the FX 6 here. Planing a 240 Gallons tank.
H Antonius vd Klis, I am curently checking on this for you, and will confirm shortly the availability of the FX6 in Vietnam. Thank you for your patience.
Thanks for this great service! I am also interested in LED lighting. I know Vietnam is importing aquarium pumps ans some LED lighting, but till now i only saw cheap reconstructed versions from China. As we all know then we can forget the quality...
Antonius vd Klis Hi, we've contacted our reseller for Southeast Asia, and they would like to speak with you directly to offer assistance with locating Fluval products in your country. Would you kindly email us at: info"at"fluvalaquatics"dot"com
(Sorry, RUclips won't allow us to write in a formal email address, but you get the idea ;)
Please include your telephone number in your email message and a best time to reach you. Thanks!
Thanks for the information. I will certainly mail to the mentioned address and see if its possible to purchase here. Thanks again for the great service.
FLUVAL Aquatics why is the fx5 more expensive than the fx6?
Dear Sir, kindly revert, do you have any heater whnch controlled from outside...rather to put hand inside the tank, waiting...regards
See below please.
Any idea of the ID and OD of the additional utility hose is for drain at the bottom that you provided?
Yes we do, 17mm I.D / 22mm O.D
Salve ho un 60 galloni con 6 discus sono indeciso se l'fx4 o fx6, il 6 potrebbe essere troppo forte come portata?
Can it be placed beside the tank instead of bottom?
Hi there! Yes, FX Series canister filters can be placed beside the aquarium rather than directly below it, provided the distance between the top of the canister and the water level is more than 8" / 20 cm and less than 59" / 150 cm. For the best filtration performance, ensure the hosing follows as straight of a path as possible, with no kinks or loops.
I bought two 406's for my aquarium. Wish I'd just bought this one now...
Just get another tank.
It says the filter pumps 925 gph and that it filters 563 gph. So after the water is filtered through media at 563 gph does it make its way back to the tank at 925gph?
Pump output is measured at the pump output, not at the tank. Filter flow rate is what is circulated through the filter.
Do the ceramic media need to go into the mesh bags? I have a new setup (~3 days, 75 gallon tank home of 1 RES turtle) and I see slight white residue/film on the top of the water. Also I am having an issue with micro bubbles, as it seems to be getting air into the system. If I unplug/plug it works fine for about 45 minutes then starts bubbling.
+dallas lamb First course of action is to always make sure to rinse media well before use. Ceramic media do not have to be contained in mesh bags. It is normal for the filter to eject air; the foam filter media will usually have to discharge trapped air for up to a few days after a new installation or maintenance. Turtles do create more of a mess, and the foods they consume do tear apart while they eat resulting in more surface film.
+FLUVAL Aquatics thanks! most of what I thought was film seem to be bubbles too so that part isn't too bad. it's only been 4 days and seems to be getting better so I will not worry and see how it goes in the next few days.
I have the fx6 canister for 3 weeks now, this is my 1st tank (120 gallons, african cichlids) my question is about filter cleaning , I see how to do it all but am wondering with the media, the one it came with and I added in another try Bio mass, does this get rinsed or just changed with new media ? im assuming the stuff i have in the nylon bags gets changed to new but cant find any info on media,,, also foam pads it came with, new or rinsed clean ? if theres any info on this please direct me to it. Thanks,
Hi tim erc, there is a section on Maintenance Media Care in the FX6 Instruction Manual (Page EN-20-21). bit.ly/1bOcXzj Hope this helps.
hi Fluval, can the fx6 be used on a 17" (in height) tall tank? the intake assembly seems rather long (in addition to the strainer too), thanks.
Kelvin Yeong It would be possible to trim the intake stem.
How often do you have to do water changes with this filter? And take the canister apart and rinse everything?
Water changes are necessary based on what you are keeping, start with twice a month at 20%.
The same for filter maintenance, initially take the filter apart every two months and clean it as recommended, make sure to dose with Fluval Biological Enhancer after.
Probably a stupid question but I just started looking in to canister filters... Can they drain your tank if there's a malfunction?
+June Arienette If a canister filter is properly installed and maintained, there is no reason to be concerned about malfunction.
+June Arienette I have heard mixed answers to this question... some say yes- some say no. in my opinion I say no. If the filter is filled with water I don't see how the tank water will be allowed to escape. I have an FX6 I just keep in in a plastic Rubbermaid container incase of a leak... so far so good. Canisters are a good way to go.
+FLUVAL Aquatics Hi. I have a 125 gallon tank. What size canister filter would I need to keep the water good and clear?
What kind of fish? and how many? ONE FX6 should do the trick.. but I am going to run 2 of them because I have cichlids they can be messy
I Love All Of fluval!! Im thinkin to go to the FX5. >> Question/s: 1. does it run at a Low full tank level. ? Say 10 inches or 12 inches Below top level of tank> the 405's do not. Can I use this for turtle tank where i keep h20 level at 3/4 full for Basking Ramp? Intrested to do so.PRASAP TY Much Fluval.
+utsuriman We haven't tested this but we don't think a few inches below would be an issue. On a related note, since you keep turtles, perhaps consider creating a custom basking area that is part of a terrestrial surround.. just food for thought. We'd be curious to know how that would work out!
Hi, as seeing you are professional about fluval filters, I have a fluval g3, it kept display the message 'conductivity out of range', and water doesn't flow synchronize. What should I do?
This is an alert and is covered in the G-Series Guide (page 33) that came with your filter. Here's an electronic version: www.fluval-g.com/pdf/Fluval-G-Series-Manual-EN.pdf
Is this going to be to big for my 45 gallon tank with goldfish
Hi Maria, goldfish are dirty fish therefore it is a good idea to provide them with a more powerful filter. The FX6 filters efficiently and effectively in up to 400US gallons. This would be a lot for your 45 gallon aquarium, our 07 line of canister filters would be a better option for you! 😊
02:44 ... what are the knobs for?
Help reminder of the last filter change but how? They have different number
Utilizing the knobs to indicate date the filter was last changed.
Just bought one of these yesterday. No reminder knobs on there, only some sort of equipment holder.
Since posting this video we have updated the FX 6 to include the hosing holding clips for the new FX Graval washer and have removed the maintenance reminder knobs.
I'm looking for a canister, and I saw JBL as an option, what do you think? I found it good by the price range
We typically recommend Fluval :)
Just setup My FX6 and the output seems to have low flow. The center trays are pretty packed with media.
Make sure there are no kinks, loops, or bends in the hosing, as this can flow water flow. Also ensure the filter has been properly primed. We encourage you to contact our customer support team for more assistance: fluvalaquatics.com/us/contact-us/
Would that be good for 125 Gallon Oscar tank?
Absolutely, the FX6 is a great choice for that type of tank!
Dear fluval I have a question can I run my 175 gallons just with a fx6 or I need something else? Thank u
Diego Bilotta Most likely you can, however it always depends on how many and what size fish you are keeping, your feeding program and other factors as well. If you would specify the species, the number of fish you have, and what you plan to feed,, we'll be more than happy to provide some input.
Hi I have a 450L tank with Angel fish ,silver sharks and barbs will it be okay with this filter with full flow ..?
Yes absolutely, that is a good sized aquarium and the fish species you mention can handle good water movement, in fact they do better with good water flow. The output nozzles on the FX series of canister filters also effectively disperse water, thereby providing a natural water movement free of overly strong directed currents.
I have fx6 fresh new tank and water how long take water to get clear, does hose have to be straight up and down , 125 gallon the intake and outtake are in the corners,
+zac logan Hi zac, that would depend on the source of the cloudiness. New aquariums are often cloudy due to the decor and residual dust and debris that comes with that. Try fine filtration pads for a few days, and if it clears, then remove those pads and replace them. Having straight hosing does help with water flow, as does periodic maintenance of the hosing. Remember to remove the hoses a few times a year to give them a thorough rinsing.
Why is my brand new fx6 loud? Been for hours..... humming loud noise from fx6 pump. Do i wait it out for 48 + hrs or so?
Try sitting the filter on closed cell dense foam pad. It might be a resonant frequency due to the location.
Where does O ring go exactly? Do phosphate and nitrite pads go on bottom level?
There is a receiving groove that is clearly visible on the motor head area that inserts into the canister. Chemical filter media should be kept in the mid to top media baskets.
I have discus n plecos with some patties in 120 gallon would this be to strong for them ?
It will be fine in a 120 gallon aquarium. There are two discharge nozzles which can be directed independently and you can reduce flow the output valve. In our experience with adult discus in aquariums that size or greater no flow reduction will be called for. Most plecos prefer strong water flow. The platys will be ok.
Why my fx6 doesn't have water change and filter change reminder?
Hi there! You probably have a more recent version of the FX6, which has clips for the Utility Valve hosing instead of water change and filter cleaning dials on top.
My tank is 19” minus trim. How far down do I put intake and output pipes??? 125 gallon tank
The intake should be fairly close to the bottom of the tank, while the output should be near the top, to provide vigorous surface agitation without splashing!
Hello, planning to buy this filter as a replacement for my broken eheim 3e 2078. However, I wonder whether I can use the current hoses (took a long time to install them under and through the aquarium bottom). What is the fluval hose diameter? Thanks very much.
Hi Alexander, we don’t suggest using your existing hoses. Instead, you should connect your Fluval FX6 with its stock hosing because it is ribbed specifically to facilitate installation. The ID of the FX6 rubber hosing fitting, which is fixed to the ribbed hosing is 24mm.
ENHEIM breaks? That's news to me.
Hallo Fluval Aquatics!
Ich hbe ein 200l Aqua kann ich den fx6 dafür nehmen oder ist der zu stark für das Aquaqrium? oder reicht es aus wenn ich den durchfluss drossel?
Ja,
es reicht aus, wenn Sie den Durchfluss drosseln.
Danke für die Info dann weiß ich was ich als nächstes besorgen muss
Hi I am from Singapore
This fx 6 series newly improve
How to see as in Singapore they might still be selling the old type series fx6
The best way is to vist fluvalaquatics.com !
Here is a link to the series page: fluvalaquatics.com/us/fx-series/
Versus the former generation this one has white canister locking knobs.
Just had a new Tank and Cabinet Delivered, Not sure if it will fit in Cabinet as I seem to read conflicting measurements depending on what site I look at.
Fluval website gives Dimensions as (L x W x H): 37 X 37 X 58 CM (14.5 X 14.5 X 23 IN), so I am going with that, but I notice the lid is wider than the base and the motor sticks out a little more. Can anyone provide the measurements of the canister at its widest point and how much the motor sticks out by. Many Thanks
Hi Stewart, the width pump sticks out approx. 3.25 inches, so allow for at least 3.5 inches here. Total width at the widest point is approx. 17.5 inches so allow for at least an extra inch here. Some factors can affect the actual dimensions (i.e. canister lock down knobs protruding, etc.), so we hope this additional information helps.
Why not provide some instructions for the Fluvav Chi filter? I have a new one and it doesn't start up right.
Lonnie, thank you for the suggestion. We do have a long list of topics to cover but the Chi does deserve some attention.
Even fluval themselves missed the o-ring that goes under the cover!!. Lol
installed new fx6 today. but its pump is not working continuously. like it runs for 3 mins and then motor stop for 10 to 15 minutes. please help. observing from last few hours
Did you resolve the problem?
my husband has the same problem did u resolve this problem Thanks
+Jenny Ward yes. i was using directly 220 V. but then got converter chngng 220v to 120v n it got perfectly fine.
Sir Is this filter good for a 4 feet 18 tall 18 trench tank to
Yes it is suitable depending on what you are keeping in the aquarium.
Can you reduce the flow rate on these to user on tanks less than 400L?
+Andrew Mclaughlan Yes, you can. However, be advised that as you reduce flow you are increasing pressure within the canister. We would advise to instead use the existing output nozzles to direct the output current to meet the water movement that you are seeking to adjust.
+Fluval Aquatics not quite sure what you mean? I'll be putting it on a 260 litre tank with red bellied piranhas in it. I thought it would be possible to reduce the input and output without any damage to the filter itself?
+Andrew Mclaughlan We are suggesting that you be cautious, because if you reduce the flow enough and your filter is at the maximum distance specified from the waters’ surface, the pressure increase can create some risk. With that being said, thanks for letting us know that you have Piranhas in a 260L aquarium. These fish will appreciate the water movement, and you can certainly use your FX6 at full flow and direct at least one output such that you are using one nozzle to create good surface movement in order to support better oxygen levels.
When you add the food (flakes), do you have to unplug the filter??
When feeding it is a good idea to feed small amounts allowing fish to consume all the food before putting in the next portion, if fish are fed in small offers then there is no need to shut the filter down. When it comes to bottom feeders the fact that the food is on the bottom should suffice. in preventing it from entering the filter.
quick question... This is the first video I have seen by Fluval Aquatics.... I saw how you attached the hose to the top of the tank, but I have a plastic rim that goes all the way around.. i believe mine is an Aqueon 75 gallon... I already have a Trigger Systems 39 Sapphire hooked up to my aquarium. I want to add a canister filter and it looks like this is the industry standard.......BUT, is there another way to assemble for a tank with a lip around the top? Have you produced other videos about this product? Link? thanks for your help
If by lip you are referring to an inner glass brace you can always have two holes drilled through the brace to allow passing the hosing or fittings.
@@fluval thanks for getting back so fast... it's that plastic rim that goes around the top of my aquarium to keep it from bowing out and the seals from bursting
hi, my electricity will be off for 5 hours, should I disconnect it or just leave it plugged in the wall
It should start up, however, it's good practice to unplug in this situation.
Can you give me the exact dimensions of the media baskets? I want to know the diameter and depth. In metric if you please. I have some foam pieces laying around and want to know how they will fit.
Hi there, please send an email to our customer service team who will be glad to provide you with the dimensions that you are looking for! fluvalaquatics.com/us/contact-us/
You didnt show what actual parts go in each basket 😢
Is it enough for a 6 ft x 1.5ft tank?
I want to get the FX6...but not sure if it will fit under my 75 Gallon. The stand doors are only 14 inches wide...does anyone know if it can fit if I take the lid off?
You will find the specs for the FX at fluvalaquatics.com, please use this link for your convenience: www.fluvalaquatics.com/ca/product/A219-fx6-high-performance-canister-filter/#.XEihE1VKiUk
I just bought one FX6 and installed it however it’s noisy with a humming noise. I measure when possible and it’s about 70db. Is this normal? Thanks
They are generally very quiet. You can try sitting the filter on a thick closed cell foam pad to eliminate any resonance.
Fluval Aquatics After getting in touch with support I have returned and purchased a new one. All is good now.