The tap shown is Quarter turn tap. The fitting called is "Quarter turn ceramic disc spindle cartridge". You'll get this in any plumbing shop cause it is the most common one.
Cut the tap water supply. Take the item to be replaced to the shop. Show the shopkeeper and ask for washer. If washer not available (Rs. 5), then ask for the same item. Rs. 80 price.
Thats good you are telling people not to waste water it has been a great challenge to world due to scarcity of water specially pure and clean water to drink
The item removed and changed is called Spindle available for Rs 100 or first simply change the washer available for Rs 2 if leak does not stop the change the spindle
Thanks for the Video, it helped me. Advice for others, carry your Tap Cap with you to the shop because the spindle head was not fitting with the Cap slot. 👍🏽
Whenever you come across such leakages in your premises and you think of changing vicers. You get to know that the tap models are not available and you will have to replace whole tap!
That's so true, but now I have to get a plumber bc of a small possible leak will accur from the inside shut off below. & the main outside may have to be shut off... So no water in my kitchen. 😢
True. My jaguar mixer rubber is swollen due to age 18 yrs. Now I don't get the rubber disc for that model. Every 2-3 yrs I have to get a oversize disc and make it to size on a sand paper 😢
Ok I will show in my next full video in details...long videos ko bhi dekhiye details main bataunga har ek cheez problem... hindi voice .... English subtitles ok
I had a tiny leak a while back. I don't know what the superintendent did (leak is gone) but now whenever I turn on and get the hot and cold tap settings to a good temperature, the volume starts to diminish and the temp get scalding. Like, why?!
Finding the right fitting in the market is always the main challenge
Half tonne is used 80%
@@addy14369❤Pray for us n me ❤️🙂🎉
There are 2 types of spindle full and turn half turn. The tap on the video is full turn.
The tap shown is Quarter turn tap.
The fitting called is "Quarter turn ceramic disc spindle cartridge".
You'll get this in any plumbing shop cause it is the most common one.
Cut the tap water supply. Take the item to be replaced to the shop. Show the shopkeeper and ask for washer. If washer not available (Rs. 5), then ask for the same item. Rs. 80 price.
Thats good you are telling people not to waste water it has been a great challenge to world due to scarcity of water specially pure and clean water to drink
Please share this video link to your family and friends 🙏
👌👌👌👌👌
In the USA these are called cartridges. Very good fix! Well done! ✅️
Thanks
And they cost 15-25 bucks 🥲😂, he gets them for a dollar
@@expertplumberworld8441sir tap ka uparvala parts nahi niklata kese nikalu
Thank you,sir.
Everyday we see many thrashes in the media. But this one is very useful and helpful at times.👍
Glad to hear that
Thanks, you. Nowadays no one is coming up to repair such small things. It is such a useful video
Glad it helped
True
No need to change full parts, Chang only vicer ( rubber grip inside)
Oh how u get spare ma
This type of spindles u can't change anything
Yes you are right 👍
@@Aruncutee electrical shops(not electronic)… or hire plumber… or tool shop
the rubber grip is useless it cuts after few weeks
Thanks for you about this education today yes amen
You are so welcome
❤️👍 | Help you idea
Good bro.... everybody is getting this same problem....nice information 🎉
Thank you so much
Thank you for the clear and helpful and brief content. It's very good. New subbie.
Very nice👍👍👍👍👍
Many many thanks
Good..... ఇలాంటి వీడియోస్ ఇంకా chupinchadi
Acha sikhne mila apke video se bhai maine subscribe bhi kiya
Thanks
muy buena recomendación, espero hayas sacado todo el sedimento de sarro para que la llave quede limpia y brillante 😊
Very nice and good thanks ithaithan ethirparthen vazhga valamudan
Thanks a lot 😊🙏
@@expertplumberworld8441 9
❤Thank You. I didn't need to change. It is fix. only cleaning.
You're welcome!
The item removed and changed is called Spindle available for Rs 100 or first simply change the washer available for Rs 2 if leak does not stop the change the spindle
Thanks ❤
Can you explain, what type and size spindles are normally used in household tap.
Thank you !
sir bagundi
plastic tap ayite elaa chepparaa
Kotta marchaley 😂😆😂
Cartridge type valve. I have these in my kitchen. It must be a very old house.
Oh cool!
Not quite that easy
old is gold
😡😡😡😡
Same problem in my house... Thank you so much... Usefull information
Happy to help
Awesome thank you so much... true, water is very essential❤ You have given an amazing solution 👌
My pleasure 😊
He is telling don't waste water. Actually himself he westing water ..🤣🤣
Spudr ❤
This saved me a ton of money. You're awesome.
Yenga veetulaium ipdithan irukku 😓tap so sad..tq u for u r information...😇
Thanks for the Video, it helped me. Advice for others, carry your Tap Cap with you to the shop because the spindle head was not fitting with the Cap slot. 👍🏽
Also cheapest idea is to replace it to plastic tap which cost 20 - 30rs and no vicer problem forever
Same problem also happens with plastic tap...
yes... you are right...
@@nehakashyap9381right m I wanted to ask how to fix problm In plastic tap?
plastic taps don't last long compared to these metal ones
True plastic tap lasted more than this steel one
This video helped me just in time and I fixed my tap... Thanks a lot 🙏🙏🙏
Great to hear!
@@expertplumberworld8441 Thanks 🙏
@@expertplumberworld8441 Please teach us how to clean the flash tank pipe, that will be a great help for many of us... 🙏
Please let me know how to clean the tap for water to flow in pressure. Thanks
Ok will do
Jo apne change kiye usko kahase milega...or nam kya h...this product ka
Spindle bolte hai use woh apko sanitary shop hardware shop pe milega jahan par bathroom ka saman milta
World best video lots of save money video thankyou so much
very nice info and Live demo✌️
Thank you! 👍
Please share to your family and friends 🙏
Thanks for the knowledge
My pleasure
Explanation with a bucket below the tap would make the entire video even more educative. However I found this very useful.
Great suggestion!
Please subscribe and like and share to your family and friends 🙏😊👍
Bahut badhiya ...😊
Thanks
Whenever you come across such leakages in your premises and you think of changing vicers.
You get to know that the tap models are not available and you will have to replace whole tap!
That's so true, but now I have to get a plumber bc of a small possible leak will accur from the inside shut off below. & the main outside may have to be shut off... So no water in my kitchen. 😢
True. My jaguar mixer rubber is swollen due to age 18 yrs. Now I don't get the rubber disc for that model. Every 2-3 yrs I have to get a oversize disc and make it to size on a sand paper 😢
Good video elanti videos apload cheyandi useful
Ok madam ade chestha meeru like share and subscribe cheyandi .😊👍
good mechanical information 👍👍👍
Keep watching
It's more easier and reliable to change the whole tap than to find and replace a tap cartridge! You also give a clean new look.
Can u turn off the water in case any accidents occur?
You need to have valves near the tank or outside the house just to cut the water supply.
The replaced part is called a spindle. Can be replaced any number of times.
Yes you are right 👍
Thank you sir given this idea give as more useful ideas again t u
Yes i will... be updated with my youtube channel... watch my videos share to your family and friends don't forget to like and subscribe 👍😊
Ap ne bahut ache se samjhaya
Share my videos and follow me on instagram expert_plumber_world
Yes useful video 🎉
Glad you think so!
But, where can we find round rubbery parts, is it available in some stores like Home Depot?
Go sanitary near by sanitary hardware shop... there will be available each and every part for your bathroom
Super it' is very very useful thank you
Thank you thank you so much 😊 please subscribe share in your family and friends 👍
No Need to Change Just Clean And fit Firmly
Thankyou so much for this video.Its really useful
Most welcome 😊
Thanks bro..juz now I've fixed my sink tap with this tutorial..
👍
Thank you
Welcome 🙂
Вау,да ты просто волшебник 😮
😂😆 oh really
Can we try this for plastic tap
Thank you so much sir ji for your good example
Nice video bro, it's useful for old model taps, mostly these usage taps became somewhat not more... But I've impressed to this..
Good to hear
Please subscribe like and share to your family and friends 👍
@@expertplumberworld8441 order Link tho
❤
❤️
Really wow.... thanks alot for creating this video....
Most welcome 😊
Thanks for give this nice video ❤
My pleasure 😊
ప్లాస్టిక్ ట్యాప్ నుండి వాటర్ లీక్ అవుతున్నాయి, ఎలా కంట్రోల్ చేయాలో చెప్పండి ఒక వీడియో
Thank you sir aapki vajah se maine aaj apna tap theek kar liya
Fantastic Sir. All you did is you Just changed the Washer.
Job well done
Thanks 👍
Thank you for sharing good information.
So nice of you
Please subscribe and like and share to your family and friends 🙏😉👍
JazakAllah.. JazakAllah.
How to find size of the spindle. I tried in the shop but they where asking for the size which i couldnot tell them
Center change pandra name enna solluga pls
Bhai, yeh top screw nikalna mushkil hai. Iska koi solution de sakte ho ise thoda aasani se nikalne ke liye ?
Ok I will show in my next full video in details...long videos ko bhi dekhiye details main bataunga har ek cheez problem... hindi voice .... English subtitles ok
@@expertplumberworld8441 Theek hai bhai
Thank you verymuch
You are welcome
How much does it cost ?
80 rs
Normally you only need to change the washer.
No big no
Materials which place available sir
On your near sanitary hardware shop
Sooooperu i will try at my home thank u sooo much
All the best
Purchase link ?
Go to any sanitary shop near to you
बदलकर ठीक किया यह तो ठीक है लेकिन आप अंदर वाले पार्ट को रिपेयर करते हुए पानी टपकना बंद करना सिखाते तो और भी अच्छा रहता
Gonna need to turn the water off before you take the stem out
Thankyou for video
Our pleasure!
Please subscribe and like and share to your family and friends 🙏😊👍
and you didn't clean under the cap?
Ok bro but it's a short video...i am showing just important things
20 bucks it is still dirty today😂😂
super sir God bless 🙏
Ye jo chenj kiya hai isak naam kya hai bata do please
Spindle
@@expertplumberworld8441 thenk you
Make a new dragon ryder m templar helmet
mcdonalds eyesbrows 😂
Thats so funny i like it better than giving me a middle finger all the time 😂
Useful tip...tqqq
Welcome 😊
Woe. Wow!! Tank you!!
Oh 😮 yay thank you ☺️
Very nice..useful
Thank you! Cheers!
very nice bro.
Thanks
Full turn nal me half turn ka spandal chalta he kya aap ne kya Aisa Kiya repair?
Han chalta hai size same rehna
I had a tiny leak a while back. I don't know what the superintendent did (leak is gone) but now whenever I turn on and get the hot and cold tap settings to a good temperature, the volume starts to diminish and the temp get scalding. Like, why?!
Supdr❤
Wow very good 😮😂😂😂
Thanks
✅
Nice thanks
Thank you too!
Very useful video
Glad you liked it
Thanks a lot
Happy to help
very helpful... Thanks
The tool inside the tap cap you replaced isnt in 80PKR. It is 300 to 400PKR. Might be this 80rs price would be in india.
Fix?
Super bro
Super sir anavasaranha plumbers boledu charge chestaru
Please subscribe and like and share to your family and friends 🙏😉👍
Thanks Anna hyderabad Telangana state 👍
Very useful bro ...🎉
Thank you 🙂
Please subscribe and like and share to your family and friends 🙏😊👍
@@expertplumberworld8441👍✨
Never use these kind of taps bcoz maintenance cost is much more
How about lever type tap?
See my all videos