Thank you for being one of the first shops to buy a C8 Z06 for developing aftermarket upgrades: and marketing videos on the internet. LMR represents Texas & the USA as good as any business. Good luck to LMR! 👍👏
You guys all rock! Pretty badass what you can do with these new c8s Hope for nothing but continued success and great progress with the new facility! Still prefer the sound of a pushrod ZR1 😉
Without a doubt, brother! I wonder if the firing order was changed like a normal LS style if it would sound different somebody that's going to stroke it to a 427 and put some nasty cams and it!
@rawful5071 depends on the supercharger kit you're talking about, but I would like to see that with a fully tune and bolt ons Z06 versus a supercharged C8!
Great video Steven!!! Your car looks & sounds amazing!!! I am 2-3 out on getting the Z06. I wear my LMR hat daily that I bought through 717 StreetSpeed. I just subscribed to your channel!!!!
That’s pretty awesome, being an lt6 have you seen any difference in the parameters hptuners allows you to see from the engine? Assuming it is using the same ecm as the lt2 they might be able to crack into the lt6 sooner than they did with the lt2!
Heres a question. If you had one choice to get one of these cars. 1970 chevelle ss 454 matching all options. Completly restored to factory fresh. Or the z06 . Which one would you get and why?
Heres a question. If you had one choice to get one of these cars. 1970 chevelle ss 454 matching all options. Completly restored to factory fresh. Or the z06 . Which one would you get and why?
Heres a question. If you had one choice to get one of these cars. 1970 chevelle ss 454 matching all options. Completly restored to factory fresh. Or the z06 . Which one would you get and why?
Heres a question. If you had one choice to get one of these cars. 1970 chevelle ss 454 matching all options. Completly restored to factory fresh. Or the z06 . Which one would you get and why?
You got sound punked. Then, after the run, the engine is so loud I can't tell what ur say'in. I'd like to see the "stock" tires on the car rather than drag radials and a non-prepped surface just to see what the "real world" numbers are like. And do you think the ERay will beat the Z06?
@@EK-rr2md An 8th of a mile would be 660 feet. I didn't know they had tracks that short... I'd always thought of a drag strip as 1320 feet, but nowadays as cars are becoming incredibly fast, that they've shortened some strips to 1000 ft to reduce speeds. I didn't see a distance on the time slip so I chose to ask rather than assume. But that said, I guess I do assume that you're quite possibly an asshole.
@@robertbigler7743 Sorry your feelings got hurt since I pointed out how easily you could find out the answer to your question and now you have to resort to calling people names.
Man, I wish I could get a 7spd manual with this car! My left leg, right arm, and right big toe had a mind of their own and we're twitching at the shift points watching this. I don't care if I could be a tick quicker! I want to drive my car , I'm not out making a livelihood on driving a car light to light. I will never get behind the idea of jamming down the gas and steering with one finger like I'm on a Sunday cruise in a Buick regal. Boring!
Would've been real impressive it 100%stock but it was not. A Shelby GT500 just ran multiple 9.90's with a CAI and a tune. Oh well, still fast anyways. Congrats!!
Funny as the 500 is faster in the 1/4 with a proper tire, and faster in a roll as well. The Z06 is faster on a track where at the end of the day you will burn through 4k worth of tires.
Brian, if you've been in outer space for the last 5 years, you probably should Google the 2023 Corvette Z06. I'm not even going to entertain answering this question.
Steven, you have to get rid of that cameraman immediately. This is a tragedy 1s. RUclips sins against videoing, especially a vehicle at the quarter mile. That man should be losing sleep at night horrible I'm losing sleep thinking about it! But anyways, if you're hiring a new video person, I will work for trade, I'll just bring over my LSX-powered vehicles, and we can work something out. Thank you from your future videographer.
In a straight line....if you can get it to stop. Plaid sounds worse than a Civic.....(nada decibels). Don't get me wrong, a Plaid will put you back in your seat, but its just not exciting. A Plaid cannot go to the track.
So tired when people say it’s a stock car, when u modify the exhaust sys and put all these parts on other then factory, it’s NOT STOCK! It’s been modified, the z06 stock does 10,6 stock, at 10,3 u modified the car from factory, as long as u invested to buy parts for a stock car, sorry but it’s been modified from factory, I can’t stand when people say it’s all stock car, when they are nvested ti make it go faster, In your guys minds , stock meaning no engine modifications, your wrong, as soon as u it parts on any stock car, it’s been modified, especially tires, Unreal ……
The only time a car is stock is when u add racing fuel, exhaust cats and 888 tires, are modified parts, only fuel would be considered stock, wow , u guys need to confess to the crime u modified that stock car at 10,6 to 10.3,
You can adjust rpm on launch but i think you can also adjust how much traction control you want.. sounds like too much traction control on the launch feels like tires could take a little more! Fast for a "stock" car!!
Thx Steven. LMR has really been at the forefront of Z06 aftermarket performance upgrades.
Thank you for being one of the first shops to buy a C8 Z06 for developing aftermarket upgrades: and marketing videos on the internet. LMR represents Texas & the USA as good as any business. Good luck to LMR! 👍👏
That ZO6 looks and sounds beautiful, I especially like the seats.
Love the new format.. Brings back the old laurel and Hardy flixs
Straight supercar sounds
Wow wow can't wait to see you guys ad Twins Turbo an
The corvette run a. 9 sec in the quarter, what a BAD ASS VETT
You guys all rock! Pretty badass what you can do with these new c8s Hope for nothing but continued success and great progress with the new facility!
Still prefer the sound of a pushrod ZR1 😉
Nope.
Lack of torque is killing the 60ft time. A supercharged stingray would be a lot faster
Without a doubt, brother! I wonder if the firing order was changed like a normal LS style if it would sound different somebody that's going to stroke it to a 427 and put some nasty cams and it!
@rawful5071 depends on the supercharger kit you're talking about, but I would like to see that with a fully tune and bolt ons Z06 versus a supercharged C8!
@@JDeubel Would be interesting to see for sure. I wish the Z06 had a little deeper of a tone but it costs too much imo anyway.
Love everything about that car. It is my dream car.
always great to watch your channel. You guys make awesome videos and job.
Video format was sick aff wit black and white old school vibes 🙌🏿🔥 C8 Z06 Procharged would be insane 👀
Great video Steven!!! Your car looks & sounds amazing!!! I am 2-3 out on getting the Z06. I wear my LMR hat daily that I bought through 717 StreetSpeed. I just subscribed to your channel!!!!
Really loving this channel.
So awesome!! Im loving the content and I will be putting my money down soon for mine. Sadly a 3-4 wait now
Can't wait til yall develop a TT kit for the new Z it's going to be sick
Those downshifts!
That’s pretty awesome, being an lt6 have you seen any difference in the parameters hptuners allows you to see from the engine? Assuming it is using the same ecm as the lt2 they might be able to crack into the lt6 sooner than they did with the lt2!
Beautiful 😎
You guys ROCK!
Send that ECM to Trifecta and get it unlocked like the Boost District car. I assume it has Global B etc.
Those noises 😳 😍
Heres a question. If you had one choice to get one of these cars. 1970 chevelle ss 454 matching all options. Completly restored to factory fresh. Or the z06 . Which one would you get and why?
Late model racecraft what helmet from Simpson are you using in this looks very cool
Nice times!!
Is the car beyond the suggested break in period? This car is damn fast
Great job on the video
Thank you
Did we ever run my car vs C8 Z on low boost!! Would be hell of a fight !!!
You had launch control dialed in. Most I have seen bog a bit.
Omg I have the stingray it sounds like a kid compared to Z06 !!!
Looks like one too in comparison, lol!
What's the best launch rpm, slip % at the drag strip and on the street?
Once this C8 gets an e85 tune she’ll be fast af👀also y’all should try porting the stock intake manifold. May be able to pick up power w no tune.
I don't think you get an advantage with E85 in a NA engine🤔
Do you think 10.3 @130+ mph isnt quick?!
@@mcmc1863 very quick even for today's hp
@@GidDree sure ya do...just not as much.
@@GidDree todays hp? Hp alone doesnt make a fast/quick car
them seat covers are sweet
Steven’s a grandma
Heres a question. If you had one choice to get one of these cars. 1970 chevelle ss 454 matching all options. Completly restored to factory fresh. Or the z06 . Which one would you get and why?
Let’s me port the intake manifold
When's the next trip with the TT C8??
Heres a question. If you had one choice to get one of these cars. 1970 chevelle ss 454 matching all options. Completly restored to factory fresh. Or the z06 . Which one would you get and why?
The Z06 because I'm not a boomer and I want real modern day performance.
What phone mount do you use for phone and dragy?
That one had me laughing 😂😂😂😂
😂
Heres a question. If you had one choice to get one of these cars. 1970 chevelle ss 454 matching all options. Completly restored to factory fresh. Or the z06 . Which one would you get and why?
What would the stock car with stock tires do?
Please start with the music but. Super awesome.
Can you put in the description whether it was stock or modded and maybe with what mods?
I believe it was stock (but with high-flow cats).
Wtf is with the Saharan wrap on the seats? Hasn’t blown up yet?
Why would you install high flow cats without a tune on a stock car? Splash of E85?
Because the ECU will adjust. Why do people post without even the slightest knowledge of things?
"That's gangster" lmfao
I was in the 9's with a Built 1971 Nova on Cam 2 fuel and 1000 lbs less weight at 7500 rpm
Can we see the 60-130 times❤️
You got sound punked. Then, after the run, the engine is so loud I can't tell what ur say'in. I'd like to see the "stock" tires on the car rather than drag radials and a non-prepped surface just to see what the "real world" numbers are like. And do you think the ERay will beat the Z06?
Hi, Is this a quarter-mile track?
wtf???
@@EK-rr2md Some are 1/4 mile, some are 1000 ft. So which is it?
@Robert Bigler you can't tell? They show the time slip. You really think it's running 10s in the 8th mile, 😅🤣😂
@@EK-rr2md An 8th of a mile would be 660 feet. I didn't know they had tracks that short... I'd always thought of a drag strip as 1320 feet, but nowadays as cars are becoming incredibly fast, that they've shortened some strips to 1000 ft to reduce speeds. I didn't see a distance on the time slip so I chose to ask rather than assume. But that said, I guess I do assume that you're quite possibly an asshole.
@@robertbigler7743 Sorry your feelings got hurt since I pointed out how easily you could find out the answer to your question and now you have to resort to calling people names.
Man, I wish I could get a 7spd manual with this car! My left leg, right arm, and right big toe had a mind of their own and we're twitching at the shift points watching this. I don't care if I could be a tick quicker! I want to drive my car , I'm not out making a livelihood on driving a car light to light. I will never get behind the idea of jamming down the gas and steering with one finger like I'm on a Sunday cruise in a Buick regal. Boring!
Yessssss!!!!! Imagine popping clutch in this thing w/ that 7spd (even in the stingray)...... I felt your comment in my soul.....
Sucks how the C8 can’t be tune to any E. Cost around $20k too just for it to be barely hitting 9 sec quarter mile.
What is your daily driver? Actually it would be cool if you and your team did a video on what they daily drive.
Steven’s is the C8 Z06
Why didn't Ford make any more flat Plane crank mustangs ?
Their design wasnt great.
I sure was hoping to see 60-130 times as well on the dragy but nope. That is a bummer.
hopefully he will respond but I'm going to guess 7.4-5
Would be inserted to see the reply. I guess it should be 7.7-79.
7.03 60-130mph
Is that faster or slower then a 19 Z06?
Most C7 Zs range from 7.6-8.2 from what I’ve seen and based on friends cars. I’m sure a couple outliers are quicker or slower.
Would've been real impressive it 100%stock but it was not. A Shelby GT500 just ran multiple 9.90's with a CAI and a tune. Oh well, still fast anyways. Congrats!!
Yeah and it also supercharged and couldn’t even stay close to the z06 on a track
@@mogulme6190 and it's 200,000 cheaper:)
@@mogulme6190 Yeah, it is $200,000 cheaper and weighs 1000 lbs. more:)
Funny as the 500 is faster in the 1/4 with a proper tire, and faster in a roll as well. The Z06 is faster on a track where at the end of the day you will burn through 4k worth of tires.
But but GT has a blower, take it off and than let's see. Duhhh
It’s not much faster than a C7 Z06 in the 1/4?
Generally speaking, it's a good 3 to 5 tenths faster than a C7 Z06, and pretty much equal to a C7 ZR1
There is two separate RUclips channels who ran two stock 2015 c8 z06’s A8 on factory tires and they both ran 10.4
Is that a ls3 or ls2 your pushing ? She gets up fast and your not even baring down on her
What are you even saying?
Brian, if you've been in outer space for the last 5 years, you probably should Google the 2023 Corvette Z06. I'm not even going to entertain answering this question.
Steven, you have to get rid of that cameraman immediately. This is a tragedy 1s. RUclips sins against videoing, especially a vehicle at the quarter mile. That man should be losing sleep at night horrible I'm losing sleep thinking about it! But anyways, if you're hiring a new video person, I will work for trade, I'll just bring over my LSX-powered vehicles, and we can work something out. Thank you from your future videographer.
Didn't need GM's Help
No stick shift any more ☹️☹️.... it could be boring....maybe it just me ...
Tesla Plaid will eat his lunch! LOL
In a straight line....if you can get it to stop. Plaid sounds worse than a Civic.....(nada decibels). Don't get me wrong, a Plaid will put you back in your seat, but its just not exciting. A Plaid cannot go to the track.
@@jasonsfam We are talking about the "drag strip" here I believe Jason. LOL
Nobody said anything about at the track.
Factory says 1050.
Why can’t you use a different view. Can’t tell anything. Let’s see the launch and the run !
Surprised it hasn’t blow up yet….lol
Needs shorter gearing
🤣👌🏾👍🏽
So tired when people say it’s a stock car, when u modify the exhaust sys and put all these parts on other then factory, it’s NOT STOCK! It’s been modified, the z06 stock does 10,6 stock, at 10,3 u modified the car from factory, as long as u invested to buy parts for a stock car, sorry but it’s been modified from factory, I can’t stand when people say it’s all stock car, when they are nvested ti make it go faster,
In your guys minds , stock meaning no engine modifications, your wrong, as soon as u it parts on any stock car, it’s been modified, especially tires,
Unreal ……
Ema heartfelt did faster
In my day, we Built it not Bought it
The only time a car is stock is when u add racing fuel, exhaust cats and 888 tires, are modified parts, only fuel would be considered stock, wow , u guys need to confess to the crime u modified that stock car at 10,6 to 10.3,
You can adjust rpm on launch but i think you can also adjust how much traction control you want.. sounds like too much traction control on the launch feels like tires could take a little more! Fast for a "stock" car!!
Now we know why peeps paying 250 k
No i don't know why? It won't hold that value at all.
@@jeremygarza4680 really just look at buying one in next few months idiot u won't less u have 225-250k even Chevy dealers mark up 100 k
What's causing these engines to blow?
What causes any engine to blow? Every car ever manufactured has blown engines.
@E K could be manufacture defects, software, etc. So basically still unknown.