#DIY

Поделиться
HTML-код
  • Опубликовано: 5 дек 2024

Комментарии • 179

  • @MototechWanderer
    @MototechWanderer  4 года назад +3

    To skip to Oxygen Sensor Cleaning - 6:45

    • @MototechWanderer
      @MototechWanderer  3 года назад +1

      So far it's holding fine. And yes it can be sprayed on engine too.

    • @MototechWanderer
      @MototechWanderer  3 года назад +1

      You're welcome. I managed to finish it with one can of both. The 3M silencer coat comes in a smaller can, so get two of them safe side.

  • @ravinderrs2552
    @ravinderrs2552 Год назад +2

    what is the metalic box in the center of exhaust

    • @MototechWanderer
      @MototechWanderer  Год назад

      It's a underbelly exhaust, basically a muffler which gives that bassy exhaust note.

  • @technofun80
    @technofun80 4 года назад +3

    Which tyre are you using in the rear?

  • @Krishanud1
    @Krishanud1 3 года назад +1

    There are many tiny factors which are explained well. Will keep them in mind when I paint my silencer next. 👍😎

  • @ShanumgasundharamP
    @ShanumgasundharamP 2 года назад +1

    Bro shall we change the bend pipe in front part between the filter and head only with steel? Pls reply

  • @jeesan2006
    @jeesan2006 4 года назад +1

    Very nice... Well timed...

  • @atmvlogs9477
    @atmvlogs9477 3 года назад +1

    Brother .... exhaust pe paint se pahele primer complesary h kya....direct sanding kr ke..,..paint laga sakte h kya ?

    • @MototechWanderer
      @MototechWanderer  3 года назад

      Direct bhi laga sakte hai. Primer se finishing better ata hai.

  • @chilloutwithmanideepcwm4738
    @chilloutwithmanideepcwm4738 2 года назад +1

    Which paint you have used and will it last long time??

  • @DheerajNagarkoti
    @DheerajNagarkoti 2 года назад +1

    nice work man

  • @NikitaSharma-bm3bx
    @NikitaSharma-bm3bx Год назад +1

    Sir u didn't mention spark plug cover in description as u said.... Where can i purchase it? i need to repace

    • @MototechWanderer
      @MototechWanderer  Год назад

      You can get spark plug caps from Yamaha Service centers/ dealers

    • @NikitaSharma-bm3bx
      @NikitaSharma-bm3bx Год назад +1

      @@MototechWanderer you mention a phone number in description... I contect them and ordered....

    • @MototechWanderer
      @MototechWanderer  Год назад

      @@NikitaSharma-bm3bx great 👍🏼

  • @anil24007
    @anil24007 3 года назад +1

    Hi Sir,
    Thank you for the well explained silencer coating techniques. I have questions, The primer and the paint need to be run engine asper the specification after paint on it?
    Where you bought this new nut bolt on the silencer?

    • @MototechWanderer
      @MototechWanderer  3 года назад +1

      No need of running engine during the painting process. You can just use natural sunlight for drying process.
      But bolt are all company ones, just cleaned them and sanded them to make them like brand new.

    • @anil24007
      @anil24007 3 года назад +1

      @@MototechWanderer Thank you for confirming.

  • @atmvlogs9477
    @atmvlogs9477 3 года назад +1

    Hello,.,...bro...apne jo silencer paint kiya h .....jo paint ke time primer use kiya h..vo bi heat resistance use kiya hai... Ya koi bi normal matel primer use kiya h ......

    • @MototechWanderer
      @MototechWanderer  3 года назад

      Paint aur Primer dono high temperature. Warna exhaust ka temperature nahi jhel payega.

  • @lkdrsofkings8926
    @lkdrsofkings8926 4 года назад +1

    Beautiful..super working..

  • @atmvlogs9477
    @atmvlogs9477 3 года назад +1

    Brother I have Yamaha FZ s....but I want customised legguard ......your fz legguard is looking good......you suggest me can your legguard fits my yamaha fz5 2011 model

  • @musicalmanoj6953
    @musicalmanoj6953 4 года назад +1

    Bhai muze fz V2 ko dual horn lagana hai battery problem hogi kay

    • @MototechWanderer
      @MototechWanderer  4 года назад +1

      Nahi hogi. Lagao. Ho sake toh relay hareness lagao.

  • @RajeshPal-rj7df
    @RajeshPal-rj7df 10 месяцев назад +1

    Very good job

  • @prajwalthokdive227
    @prajwalthokdive227 4 года назад +1

    Bhai mere pass bhi fzs 2.0 hai, bike mai bohot problem h drum break ke rubber lose hote h barbar Or voice ati h Maine garage mai dikhaya kaam bhi kiya but fir bhi waho problem hai mujhe yaha waisa mechanical nhi mil rha h jo bike ko samjhe Or repair kare apke video se mujhe help hui mai khud kar sakta hu repair, aap kaha se ho bhai

  • @user.DeepBrar
    @user.DeepBrar Месяц назад +1

    10-12 no ki key se he khul jayega,???

  • @srpatnaik4548
    @srpatnaik4548 3 года назад +1

    Excellent DIY...

    • @MototechWanderer
      @MototechWanderer  3 года назад

      Thanks a lot 🙏 ... Do subscribe to my channel for more such DIYs

  • @joydeepkarmakar333
    @joydeepkarmakar333 3 года назад +1

    From where you got the original fairing bro??
    Mine also damaged.

    • @MototechWanderer
      @MototechWanderer  3 года назад +1

      Got it from regional spares distributor in Hyderabad. You can get Yamaha and other bike parts through the person mentioned in the video description. He can ship you almost anything anywhere across India. His name is Merlin.

    • @joydeepkarmakar333
      @joydeepkarmakar333 3 года назад +1

      @@MototechWanderer thanks for the info. 😊

  • @manojshrestha5300
    @manojshrestha5300 27 дней назад +2

    Paint with brush with black enaemel for long run.

    • @MototechWanderer
      @MototechWanderer  27 дней назад

      Black enamel can handle 200+ degrees heat of the exhaust? Have you tried ?

    • @manojshrestha5300
      @manojshrestha5300 22 дня назад

      @@MototechWanderer yes just last month i painted engine portion ,exhaust bike downwards parts ,handle and swing arm along with its inner mudguard.its look new.i tried long tour too.its look good.unfortunately i didnt find matt black enaemel so i did it with shiny one.

  • @2009mrsuresh
    @2009mrsuresh 3 года назад +1

    Excellent narrative 👏 👌 👍 🙌 😀

    • @MototechWanderer
      @MototechWanderer  3 года назад

      Thank you! Glad you liked it. Do subscribe to my channel if you haven't yet for more such videos. 😊👍

  • @shubhamgupta6984
    @shubhamgupta6984 2 года назад +1

    at what cost u had bought high heat primer?

    • @MototechWanderer
      @MototechWanderer  2 года назад

      It was 700 INR back then, now the prices hv increased.

  • @roboanalytics1678
    @roboanalytics1678 4 года назад +1

    Bro my exaust pipe near tyre for bend by crashing how to fix it🙏?? Help

    • @naveenreddym6222
      @naveenreddym6222 4 года назад

      Go to welding lathe work shop then can answer 👍

    • @MototechWanderer
      @MototechWanderer  4 года назад

      if the welder can fix it, its good, else buy a new exhaust.

  • @nageshm7285
    @nageshm7285 4 года назад +2

    Sprb.... 👌

  • @dulartalasofficialj4114
    @dulartalasofficialj4114 4 месяца назад +1

    Dono espre Paint ka name kiya tha bro

  • @AjithsRaj-nu4md
    @AjithsRaj-nu4md 3 года назад +1

    Which number of primer and paint bottle used in u r silencer I got a same bike

    • @MototechWanderer
      @MototechWanderer  3 года назад +1

      One bottle of Rustoleum Hi Temp Primer. Check the video description for details.

  • @anandkannan6400
    @anandkannan6400 4 года назад +1

    Bro hows the paint right now is they last like company painting

    • @MototechWanderer
      @MototechWanderer  4 года назад

      It's still fine. The only way you can damage the paint is if it's exposed to petrol. Else it will be fine. The only reason why it's not as strong as company paint is becoz these paint cans do not have harderner in them.

    • @anandkannan6400
      @anandkannan6400 4 года назад

      @@MototechWanderer and how i get the same black paint. Is that paint now avilable in amazone

  • @jogeshep4268
    @jogeshep4268 Год назад +1

    How much ml of paint and primer used?

    • @MototechWanderer
      @MototechWanderer  Год назад +1

      Could not finish either of the cans ... So less than 500ml.

  • @naveenreddym6222
    @naveenreddym6222 4 года назад +2

    I painted normal Berger metal paint .it take 2 days to dry🙄. After 2 days i started my fz and paint on silencer start melting and smoke full .. after riding 10km stopped smelling and smoke as well as attached well to the silencer ❤️.. better use anti rust silencer spary paint if u dont have patience 👍

    • @MototechWanderer
      @MototechWanderer  4 года назад

      The high temperature paint that used did not smoke or melt. It's built for this kind of high temperature application.

    • @naveenreddym6222
      @naveenreddym6222 4 года назад +1

      @@MototechWanderer ss but i said already i used normal berger metal paint ..which use to paint gates grills of house 😁

    • @MototechWanderer
      @MototechWanderer  4 года назад

      @@naveenreddym6222 good, if it works for you, then nothing like it.

    • @naveenreddym6222
      @naveenreddym6222 4 года назад

      @@MototechWanderer yes worked and sticked well ..but rust cleaning painting with brush is hard

  • @sanjay7090
    @sanjay7090 9 месяцев назад +1

    Can we install in r15 long silencer

  • @sajibexv
    @sajibexv 2 года назад +1

    Which one is o2 sensor and where is it???

  • @93shazwolf79
    @93shazwolf79 2 года назад +1

    Bhai paint burn to nhi hua batana bro

    • @MototechWanderer
      @MototechWanderer  2 года назад +1

      Nahi hua burn par kuchh jagaho pe damage hua hai ... 3M ka exhaust paint better hai.

    • @93shazwolf79
      @93shazwolf79 2 года назад

      @@MototechWanderer thanks

  • @tanpuia40
    @tanpuia40 3 года назад +1

    Very very interesting

    • @MototechWanderer
      @MototechWanderer  3 года назад

      Thank you. Glad you liked it. Do subscribe to my channel if you haven't yet.

  • @MohitSingh_100
    @MohitSingh_100 3 года назад +1

    New sylencer ka kya price higa bhai

  • @prithvinayak8443
    @prithvinayak8443 6 месяцев назад +1

    What does the weep hole do?

    • @MototechWanderer
      @MototechWanderer  6 месяцев назад

      Let's the water formed inside the exhaust due to condensation to pass avoiding internal rusting.

    • @prithvinayak8443
      @prithvinayak8443 6 месяцев назад +1

      @@MototechWanderer a significant amount of water drops come out in a spray format when i start the engine, is it normal?

    • @MototechWanderer
      @MototechWanderer  6 месяцев назад

      @@prithvinayak8443 absolutely normal and indicates a healthy engine.

    • @prithvinayak8443
      @prithvinayak8443 6 месяцев назад

      @@MototechWanderer Thank you!

  • @jannatulachol3586
    @jannatulachol3586 4 года назад +1

    Bro just tell me which 2 brand spray u used

  • @denialraj2203
    @denialraj2203 2 года назад +1

    Bhi ya 1 ka bad kasa ha paint

    • @MototechWanderer
      @MototechWanderer  2 года назад

      Thode rust spots aaye hai ... 3M ka silencer coat better hai thoda

  • @AnilKumar-zm4is
    @AnilKumar-zm4is 4 года назад +1

    Hi bro were do I get dis paint m searching it's hard to get...

  • @nubuyonjn4680
    @nubuyonjn4680 9 месяцев назад +1

    What is the price og exhaust of this bike

  • @technofun80
    @technofun80 4 года назад +1

    Nice video series bro. Please do engine related videos on FZ V2

  • @ebineldose6360
    @ebineldose6360 4 года назад +1

    Will the exhaust paint lasts for a long time?

    • @MototechWanderer
      @MototechWanderer  4 года назад +1

      It will unless you pour petrol / gasoline on it. These paints react to Petrol. Other than that, quite high quality and long lasting.

    • @ebineldose6360
      @ebineldose6360 4 года назад +2

      @@MototechWanderer Thnx bruh!✌️

  • @ajinkyarodge5584
    @ajinkyarodge5584 4 года назад +1

    Could you please provide the link for the paint

    • @MototechWanderer
      @MototechWanderer  4 года назад

      Not available on Amazon since quite some time now. It wad a Rust-Oleum High Temp Matte Black.

    • @MototechWanderer
      @MototechWanderer  4 года назад +1

      Matte Black high temperature paint : amzn.to/36WvT5c

    • @ajinkyarodge5584
      @ajinkyarodge5584 4 года назад

      @@MototechWanderer Thanks bro

  • @gurunath1030
    @gurunath1030 3 года назад +1

    Hello bro put the one year review of the paint...........

  • @satyajitsuvankar9796
    @satyajitsuvankar9796 4 года назад +1

    Bro any suggestions for engine guard for fz v2?

  • @kennedymawrie123
    @kennedymawrie123 3 года назад +1

    How much original price of silencer fz

  • @Editor_zone7
    @Editor_zone7 Год назад +1

    Fz v2 Stock exhaust price ?

  • @foysalsohel2421
    @foysalsohel2421 4 года назад +1

    How many layer of primer?
    How many layer of paint?

  • @ahamedashik3850
    @ahamedashik3850 3 года назад

    Hello bro before painting u spreed painting that name

    • @MototechWanderer
      @MototechWanderer  3 года назад

      Everything is mentioned in the video description. 👍🏼

  • @Anandf780
    @Anandf780 4 года назад +1

    Which paint did u use?

    • @MototechWanderer
      @MototechWanderer  4 года назад

      Links are in description. I used a Rust-Oleum high temp paint.

    • @MototechWanderer
      @MototechWanderer  4 года назад

      Matte Black high temperature paint : amzn.to/36WvT5c

  • @vaibhavmahade5990
    @vaibhavmahade5990 4 года назад +1

    What is the name of high temp PAINT?

  • @Ranjithkumar-je5kc
    @Ranjithkumar-je5kc 4 года назад +1

    Which paint using

    • @MototechWanderer
      @MototechWanderer  4 года назад +1

      Rust-Oleum ... Check the description for links. 👍

    • @MototechWanderer
      @MototechWanderer  4 года назад

      Matte Black high temperature paint : amzn.to/36WvT5c

  • @BabyEsther-c9p
    @BabyEsther-c9p 10 месяцев назад +1

    Mujhe Yamaha fz2 ka silencer ka bend pipe chahiye

  • @jannatulachol3586
    @jannatulachol3586 4 года назад +1

    Just tell me 2 sprey name colour & brand

  • @cbrburhan7475
    @cbrburhan7475 2 года назад +1

    Bangladeshe price kto hobe

  • @jayakumark1233
    @jayakumark1233 4 года назад +1

    Useful one

  • @nisanthissac89
    @nisanthissac89 3 года назад +1

    hi, what's the price of that duct?

    • @MototechWanderer
      @MototechWanderer  3 года назад +1

      Around 400-600 INR

    • @nisanthissac89
      @nisanthissac89 3 года назад +1

      @@MototechWanderer oh it's costly

    • @MototechWanderer
      @MototechWanderer  3 года назад +1

      Sorry my bad. The duct for sparkplug was some 150-250 INR.

    • @nisanthissac89
      @nisanthissac89 3 года назад +1

      ​@@MototechWanderer ok.. is it ok to skip the primer part and apply paint directly?

    • @MototechWanderer
      @MototechWanderer  3 года назад +1

      Primer helps in better bonding and also gives a better finish. It's fine to skip it.

  • @jitupatil9241
    @jitupatil9241 4 года назад

    Nice video.
    I also try this.

  • @MOTOVILINDIA
    @MOTOVILINDIA 4 года назад

    very good ..............

  • @shivambigwaliya9807
    @shivambigwaliya9807 4 года назад +2

    I want yamaha fz v2 bend pipe laha milega

    • @MototechWanderer
      @MototechWanderer  4 года назад +1

      Pura exhaust kharidna padega from authorized Yamaha Dealer.

  • @ankushymd703
    @ankushymd703 4 года назад +3

    Dislikes are all from garage owners ...

  • @abhijeetkamble6104
    @abhijeetkamble6104 3 года назад +1

    Does any1 here knows cost of that o2 sensor.?

    • @MototechWanderer
      @MototechWanderer  3 года назад

      I am not aware but I don't think it's very expensive.

  • @ahamedashik3850
    @ahamedashik3850 3 года назад

    And after black paint that spray name

    • @MototechWanderer
      @MototechWanderer  3 года назад

      Everything is mentioned in the video description. 👍🏼

  • @dwaipayantalapatra6109
    @dwaipayantalapatra6109 4 года назад

    Fz v2 Rpm control valve screw broken. How to fix that

    • @MototechWanderer
      @MototechWanderer  4 года назад

      If you can order it at the dealership well and good. Else, you might need a throttle body replacement.

  • @arafatparvez8242
    @arafatparvez8242 4 года назад

    Good work indeed but I would love to see improvement on the details..you cant just paint the exhaust and leave other parts rusty such as your knee guard...please restore every visible parts to mint condition...it will be something great to watch.

    • @MototechWanderer
      @MototechWanderer  4 года назад

      I have replaced the crash bars to a new one as the old one was damaged. And now the bike is restored to a brand new one. Just needs a rear tyre replacement as it has a flat spot due to the chain break accident and a proper wash and detailing. Will post a video on it soon.

    • @MototechWanderer
      @MototechWanderer  4 года назад

      Please watch the new videos, bike is fully restored - ruclips.net/video/Bye4qilWNDI/видео.html

  • @yogik3890
    @yogik3890 4 года назад

    Good

  • @muneshbhoye3788
    @muneshbhoye3788 3 года назад +1

    Sailensar milega kye sie second mein

    • @MototechWanderer
      @MototechWanderer  3 года назад

      Video description me jo contact hai unse check kijiye.

  • @ShivaShiva-fg4px
    @ShivaShiva-fg4px 3 года назад +1

    Tnq

  • @jkg8580
    @jkg8580 3 года назад +1

    😍😍😍👍👍

  • @alenalex132
    @alenalex132 4 года назад +1

    👍👍👍

  • @dipendupaul9167
    @dipendupaul9167 2 года назад

    Very tiring work. Better for professional guys

    • @MototechWanderer
      @MototechWanderer  2 года назад

      DIYs are very satisfying if it interests one. Else better to give off to a professional.