Lovely bhai mere FZ bike me bhi same problem hra hai but mujhe pta nhi chlra thaa ke konse problem hai but apke ye video dekr mujhe pta chlgya hai ke ye suspension bush ka problem hai Thank u soo much bhai ❤️
Wow. Great dude. I was actually finding out the reasons on what was the cause of these types . of vibrations and you came up with an awesome video. Thanks bro.
@@MototechWanderer Thanks. Do you also face a problem of handle play (Some noise comes near the centre of the handle when you ride on potholes or if you ally the front disc). If you have any insights about these, could you kindly share or make a video. I have an FZ purchased last year. Most of the Yamaha bikes have this problem.
@@arunamingad4370 that's due to Cone Set or steering bearing. A local mechanic can tighten it. In worst case, it needs a replacement. Will cover that in a video when it fails in my bike.
I'll try it.tqs for the video man. Gone mine too at 38k kms. Bohot dukh hota hai, jab a jaata hai, poori gaadi me bhukmp hota hai. Refinement ki maa ki aankh hojaati hai........................!
I've noticed some Bangla writing on the mudguard! Anyways, found out your channel just today and already binge watching! Great contents. Keep up the good work works bro..
hi, I have fz16 2013 model, clocked 38k km. please suggest what are all the parts need to replace, also the bike low end torque is very very low.. should I change the clutch plate? will it increase the low end torque.. the engine brake power is also reduced. please suggest.
As the question is very generic, let me try to point out what all can possibly go wrong : 1. Chain Sprocket kit 2. Front and rear tires 3. Air filter 4. Spark Plug 5. Throttle body & injector cleaning 6. Valve clearance / tappet adjustment.
thanks bro for such video, whenever i goes for services my bike every time mechanic says your clutch plate is gone you have to change it should i change the clutch plate everytime and i service my bike fzsv2 after each 3000 km please suggest
brother yamaha fzs 2014 and fazar fi has the same swing arm or not...... i want to switch my fzs 2014 swing arm with fazer fi ones.......is it possible ????
@@Ahxiang99 if both front and rear tyres are new, then look into the wheel bearings. If wheel bearings do not have play, then it can be the swing arm bearing.
Bro my new fzv3 had very stiffer suspension and i feel slite boucing or its feels like someone hiting to my back resulting back pain. If i smoothen it will be okay?
After usage of around 5000 kms, it will be smoother. You can also adjust the preload of the rear suspension. Make sure the tire is not over-inflated as that may also result in a bumpy ride
Chain needs adjustment. If no more adjustment is left, replace the chain sprocket set. Wobble is due to defective of old tyre. Also inflate the wheel to respective 29PSI(front) and 33 PSI(rear).
It can be tappet noise. If the engine is very old then it can be crank bearing. First check the basics. Set the tappet and reset the timing chain tensioner and see if it works.
Fazer V2 35k+ km Vibrates between 3200-3500 rpm when accelerating in 3gear.. after 3500 rpm vibration stops. Do you think am facing the same issue. Please do help me out with it.
Bro nice job.....i replace both bearings and collar after 33k .....bt now vibrations happens again on 39k.... Idk what will i do .... collar n bearings cost is 800rs and labour charge is 400rs total cost in india is 1200 rs.....
I Too have this issue With my FZS FI, I Replaced the Bearings 4 months ago and the vibration has gone for the past 4 months, now it started vibrating again, it cost me 1500 (Local Mechanical Shop)
Brother I have one issue on my new fz s fi ...rear wheel is not in the centre position with the mudguard... showroom people tell that the model itself now like that...I m not satisfied with that answer....any ideas bro!
@@Bikerak_047 mostly tyre issue, if tyre is old, replace it. Next check rim, if rim is bent, get it fixed. Next check wheel bearing and sprocket bearings. Mechanic can open the rear axle and check. If they are fine, just put grease and put back. Then check the swing arm bushes, replace if found damaged. I think it's mainly tyre issues. Replace both front and rear tyres together.
When I power my fz v2, I get a vibration. I think this can be the solution. Before this video, I though I have problem with my chain spocket which I already changed 3 weeks before but the problem didn't solve. Can you confirm me, if you get this vibration when rising the speed up in 2nd / 3rd gear? Because in highway when my speed is above 60km/hr, I don't feel the vibration. I hope changing this bearing will solve my problem. Waiting for your suggestion :)
Thank you bro @Moto Tech Wanderer ... My bike was very smooth but after I gave service to a Yamaha showroom ... my bike started vibration and hard ... Vibration is from engine to footpeg ... I believe they have changed some parts ... Can you tell me what could be the possible reasons
Check if the swing arm has lateral free play like it was done in video. If it's there, you know what to do. If not, get it checked by the service center.
N yes this vedio also good nice explanation this is the way to giving knowledge to who can’t afford money not for parts for services charges n that also they taking too much charges nice u actually u helping 👍🏻
Bro my bike is fz v3, handle is lagging right side getting pain to arms I changed oil seals and t road throwing done means handle shocksides complete set thrw and new hanlde install, after that not getting why my arms are pulling
M facing this problem FZ S V2 2015 model onli around 5000 km So I need this parts can you please share a link to me that I can able to order on online Please reply me Thank you
Sir mene Meri fzs ka stearing cone bhi chabge kiya bt fir bhi Khadde me Gadi gayi to aawaj bahot aati hai stearing ki khad awaj aati hai to kya swallution hoga ispr plz batao
Bro I bought Fazer FI V2 by yesterday. During the delivery time I spent some time for inspection. And in that to check the front fork for having any play, I putted the bike in center stand. And kept the front wheel on air. Then place the handlebar in center position and take off my hands. But it wasn't fall in either left or right side. But stood still. I doubted does the front fork has play. So I asked regarding it to the service guy, he told me it's because it is a new bike. Is it true? In New bike like Fazer the handlebar stand still in the middle? Isn't the symbol of the bikes had play?
bro can you help mee..??.. mey 3,4 din pehle r15 v2 mey tyre chnge krke 140 section tyre lagaya..ab pblm yeh ho raha ki 50,60 kmph speed mey tyre ki taraf se ku6 vibration aa raha hay or foot pegs mey feel ho raha..tyre lines,both side ka space sab ku6 thik hay..fir v yeh q ho raha hay samajh mey nahi a raha..plz hlp me if you can..!
Check karo ki tire kahin touch toh nahi ho raha. Agar nahi ho raha toh kuchh nhi kar sakte becoz woh tire ka vibration hai. Ek bar tire setting dekho ... May be tire thik se rim pe baitha nahi hai. Chain ko adjust Karo and clean and lube Karo. May be chain adjustment bigad gaya hai.
Same bro...main aaj swing arm ka kam karne gaya tha....its too hard Nikal hi nahi raha tha .. mechanic ne bike vapis kar diya... Any solution? Already WD 40 bhi try kiya open karne ke liye... And front weel ka bhi bearing chage karne ka required hai kya??
@@MototechWanderer I am facing same problem bro. How much cost of swing arm bush. It is very difficult work how do you do that. Hats of you brother. I have Yamaha fazer v1.Are you studying in IIT. IIT student can do this. I have one question regarding mirror of fazer. Where do you purchase blind spot mirror.
@@pritishmohapatra4647 It was indeed a lot of hard work. And having the camera record all that was even more difficult. The total cost of things are said in the video. You can get the parts changed at a mechanic shop too.
Not related to con bearing but. Whenever i give throtle engine and cutch side always vibrate. And bike is not smooth while riding it always makes noise from downside in between of clutch and gear box. Any idea wht happened to my bike?? It is not smooth while riding!!
Bhai Meri Yamaha fazer bike h jab mai use challata hu chote motte gadde m jaise jor se Jake patakti h bike to Esme swing ram k barring baddle jayenge Mai bahut dino pareshan hu ki peeche k monosoker to kharab to nhi h please mere comment ka answer dedena bhai
@@MototechWanderer bro 15000 kms in 12 months. Bought last year Sep. Front bearings were busted. Replaced them. Now facing the handling issue as mentioned earlier... Tried to do handle loosening, tighting, no solution.
Bhai meri fzs me vibration ki problem he chain sprocket bhi change krava liya fir bhi vibration kam nhi ho rahi he or rear idhar udhar ho raha he aisa feel hota he kya kru kuch solutions do
SHAKIL SHAIKH Disk ko shampoo se wash karo. Nhi thik hua toh hit the caliper with your fist few times. Phir bhi thik nhi hua toh reset cylinders of caliper. Brake shoe replacement video ko dekho for help
Its difficult to do things alone but u did a fantastic job.
Thanks a lot. 😊
Lovely bhai mere FZ bike me bhi same problem hra hai but mujhe pta nhi chlra thaa ke konse problem hai but apke ye video dekr mujhe pta chlgya hai ke ye suspension bush ka problem hai Thank u soo much bhai ❤️
Thank you so much. Subscribe karna mat bhoolna channel ko
Wow. Great dude. I was actually finding out the reasons on what was the cause of these types . of vibrations and you came up with an awesome video. Thanks bro.
Glad you found it useful. Thanks for your appreciation. 😊
@@MototechWanderer Thanks. Do you also face a problem of handle play (Some noise comes near the centre of the handle when you ride on potholes or if you ally the front disc). If you have any insights about these, could you kindly share or make a video. I have an FZ purchased last year. Most of the Yamaha bikes have this problem.
@@arunamingad4370 that's due to Cone Set or steering bearing. A local mechanic can tighten it. In worst case, it needs a replacement. Will cover that in a video when it fails in my bike.
@@MototechWanderer cool bro. Thanks for the information.
A contend full video you made. Do like this whenever possible. Worth for watching👍
Joseph Samuel Thanks a lot bro. That means a lot. 😊
Vibration happens at same rpm and speed bro.. But fairing is vibrating.. Thanks for the video bro.
k.m Afnan Now you know how and what to do.
I'll try it.tqs for the video man. Gone mine too at 38k kms. Bohot dukh hota hai, jab a jaata hai, poori gaadi me bhukmp hota hai. Refinement ki maa ki aankh hojaati hai........................!
You're welcome! ... Good luck, fix it up now. 👍
Have the same kind of problem will try getting it changed. Good efforts nice video.
Thank you. Glad it helped.
I m also facing the same problem with my Apache RTR 160. I will try this and will let you know the results Insha Allah
Thanks. Do keep me posted. It will be a new learning.
I've noticed some Bangla writing on the mudguard! Anyways, found out your channel just today and already binge watching! Great contents. Keep up the good work works bro..
Thank you so much 😊
73k on my FZ, no problem yet. Guess few bikes are having these issues. But a very good video.
dilip p Thanks Bhai. Swing arm and bushes were different in V1. Even part number is different.
Mototech Wanderer ohhkk..... Got it
dilip p Lucky V1 owners. 😊
Super sourithra Ganguly... Keep going man...
Shivaraj Karrolla Thanks Shiva.
My man....you are doing great work there... Keep sharing...❤️
Thank you so much ❤️🙏🏼
Thanks for the video...
But i want to know by changing only bush bearings the problem may solve of vibration or we also have to change the collar
I changed bushes + collar as a set. I will suggest to replace the whole set together.
@@MototechWanderer replace is only the solution of the set or by cleaning and greasing problem may solve
@@chinmayjunnarkar2405 bush definitely needs replacement. Collar you can try to only clean and grease and give it a try.
very useful channel. subbed.
i am a yamaha fzs v2 owner.
Thanks a lot 😊
Bhai mri fzs m bi 3000-3200 rpm pr vibration hoti h jyada ni bt hoti h sbi gear m.kya usme bi yhi problm hogi
Pawan Rajput Ho sakti hai. Agar aapki bike 15,000 kms se zada chal chuki hai, toh high chances hai swing arm bush gaya ho.
hi, I have fz16 2013 model, clocked 38k km. please suggest what are all the parts need to replace, also the bike low end torque is very very low.. should I change the clutch plate? will it increase the low end torque.. the engine brake power is also reduced. please suggest.
As the question is very generic, let me try to point out what all can possibly go wrong :
1. Chain Sprocket kit
2. Front and rear tires
3. Air filter
4. Spark Plug
5. Throttle body & injector cleaning
6. Valve clearance / tappet adjustment.
thanks bro for such video,
whenever i goes for services my bike every time mechanic says your clutch plate is gone you have to change it should i change the clutch plate everytime and i service my bike fzsv2 after each 3000 km please suggest
Clutch plate should be oNly replaced if the clutch is slipping.
@@MototechWanderer thank you
Thank you so much for the video and instructions. I was facing the same vibration problem with FZS-FI-V2.
Glad it was helpful. Do like and subscribe. 👍
same issue with me fzs fi ver 2
Now you know how to fix it.
You helped me a lot brother. Love from kolkata. ❤️
Thank you 😊🙏🏼
@@MototechWanderer thank you too bro. I just replaced my swing-arm bush. Now my bike is completely okay. Thankyou again for guiding me. ❤️❤️❤️❤️❤️
Great to know. 😊👍🏼
bro please make a video on greesing swing arm bush, wheel bearing and steering bearin. And how to do an major serivce in fz
Sure. Will make one
@@MototechWanderer bro iam using fzv2 ....my bikes tyres on side is wearing ....whats the problem bro
@@daisyjose5765 running low tire pressure.
brother yamaha fzs 2014 and fazar fi has the same swing arm or not...... i want to switch my fzs 2014 swing arm with fazer fi ones.......is it possible ????
Studio Deadline Different swingarm. Can't be interchanged
Currently riding a fz16 facing issue when riding n pass by any road markings my bike will wobble isit due to the swingarm?
That's due to worn out tyres ... Replace the tyre and that issue will get resolved.
The tyres are new hahaha
@@Ahxiang99 if both front and rear tyres are new, then look into the wheel bearings. If wheel bearings do not have play, then it can be the swing arm bearing.
Nice video.. Got the same problem to my bike.. Issue solved.. Thnks
Happy to know. ☺️👍
Which bike
Bro my new fzv3 had very stiffer suspension and i feel slite boucing or its feels like someone hiting to my back resulting back pain. If i smoothen it will be okay?
After usage of around 5000 kms, it will be smoother. You can also adjust the preload of the rear suspension. Make sure the tire is not over-inflated as that may also result in a bumpy ride
use a C spanner to soften the pre-load of the monoshock. rotate clockwise.
keep tyre pressure 26 and 30
Bro my chain getting slack with pillion rider and small wobble from back tyre in small bump! What is the problem? Please clarify me
Chain needs adjustment. If no more adjustment is left, replace the chain sprocket set. Wobble is due to defective of old tyre. Also inflate the wheel to respective 29PSI(front) and 33 PSI(rear).
Great video. Thanks from Colombia. Did you know the bearing number?
Sorry, don't have the part number. Will copy next time I replace them.
Thank you. Do consider subscribing to the channel
is faulty swing arm bush cause the handling of bike?
Yes. It can be an issue.
Shir ye swing arm bush old Yamaha Mai instell ho skta hai kya r15 v1 Mai
Nahi ... Part number alag hai old yamaha ke swing arm bush ka.
I have fz fi v2 bs4 2017 model and there is a problem of rattle sound from the engine. I don't know the solution is . Please help.
It can be tappet noise. If the engine is very old then it can be crank bearing.
First check the basics. Set the tappet and reset the timing chain tensioner and see if it works.
can we buy the same size bearing from shops and put that in motorcycle the size of bearing is ID-18mm, OD-24mm, H-16mm
If you have the exact size, absolutely you can use after market bearings too.
@@MototechWanderer i have to use the aftermarket bearing because their is no stock in service center
how to install rear disc brake in fz v2 2015 model? how much will it cost?
Around 10,000
Thanks :)
Thinking about to install rear disc.
@@anupchandran it's possible. Good luck.
Fazer V2
35k+ km
Vibrates between 3200-3500 rpm when accelerating in 3gear.. after 3500 rpm vibration stops. Do you think am facing the same issue. Please do help me out with it.
Yes. I feel it's the same issue.
Same issue I feel on that same rpm..I have already change swim arm collar & bearings earlier near about 25000km but now again same issue has started..
Thanks bro meri fazer ok ho gayi
Wow!! That sounds great. 😊
where to buy best quality those spanner and other tools.
All the links of products in the description.
Bro nice job.....i replace both bearings and collar after 33k .....bt now vibrations happens again on 39k....
Idk what will i do .... collar n bearings cost is 800rs and labour charge is 400rs total cost in india is 1200 rs.....
May be the work was not done well. My bike is running fine. Around 10k kms done after replacement.
I Too have this issue With my FZS FI, I Replaced the Bearings 4 months ago and the vibration has gone for the past 4 months, now it started vibrating again, it cost me 1500 (Local Mechanical Shop)
Brother I have one issue on my new fz s fi ...rear wheel is not in the centre position with the mudguard... showroom people tell that the model itself now like that...I m not satisfied with that answer....any ideas bro!
It's possible that the mud flaps itself is little bent . It's same in my bike too.
@@MototechWanderer bro but it looks odd in new bike...only 20 days ago I owned it... anyway to make it right
If it's too much bent, then check wheel adjustment. Also try replacing the mud flaps.
@@MototechWanderer ok bro...thank u
@@MototechWanderer fixed it bro...... another one thing..what is the optimum level of suspension on the monoshock
Bro my fork oil is leakage in one leg only.. should i change in both leg??
Sudip Shrestha no brw u need to change only the leaked one... Otherwise the shock stumb made scratches... Leads to oil seal broken...
Price of bush bearing please
Don't remember exactly, I think it was around 400 INR
Bro slove my query@@MototechWanderer
My r15s 2017 bike back Swing arms babbling and moving or tyre not smooth vibration move so what the problem what to change
@@Bikerak_047 mostly tyre issue, if tyre is old, replace it. Next check rim, if rim is bent, get it fixed. Next check wheel bearing and sprocket bearings. Mechanic can open the rear axle and check. If they are fine, just put grease and put back. Then check the swing arm bushes, replace if found damaged.
I think it's mainly tyre issues. Replace both front and rear tyres together.
When I power my fz v2, I get a vibration. I think this can be the solution. Before this video, I though I have problem with my chain spocket which I already changed 3 weeks before but the problem didn't solve.
Can you confirm me, if you get this vibration when rising the speed up in 2nd / 3rd gear? Because in highway when my speed is above 60km/hr, I don't feel the vibration.
I hope changing this bearing will solve my problem.
Waiting for your suggestion :)
Your issue is the same as the one shown in this video. Plz go ahead with swing arm bearing replacement.
@@MototechWanderer thank you Bro. . I will change it tomorrow and hopefully give you a positive result
Same to same problem withmy fzs v3 also ..
@@mohammademu1292 what is the result bro
@@mohammademu1292is it correct solution for our problem please tell me soon
Please make a video on how to change cone set on FZ S V2.0
Sure will make once my come set is gone.
AMAZING BRO!!! Shared this on FB :) Keep up the great work.. you are "Indian Engineering Explained" channel hehehe
CRAZY GRASSHOPPER Haha... Thank you so much bro 😊
Thank you bro @Moto Tech Wanderer ... My bike was very smooth but after I gave service to a Yamaha showroom ... my bike started vibration and hard ... Vibration is from engine to footpeg ... I believe they have changed some parts ... Can you tell me what could be the possible reasons
May be the oil needs to break in after which the engine will smoothen out. Also check the chain, may be they over tightened the chain.
@@MototechWanderer They did that and adjusted ... But couldn't get the smoothness like earlier
@@MototechWanderer This happened a year before ... After that I went to many mechanical shops they couldn't figure out
@@rishikesh1331 look at the alignment of the wheel. Also vibrations can be caused due to Swingarm bearing.
@@MototechWanderer ok will check both of these ... Thank you so much for replying ... Will any engine problem lead to Vibration?
thanks brother tomorrow i will cover this my problem
Sure. Good luck. 👍
Loved your work
Thanks a lot! Do consider sharing to the channel.
How can i change fz16 rear suspension to stiffer side and increase seat height
Will try to make a video on it.
Bro same vibration problem done with my bike fz fi
Running km 12k
What should i do please suggest me
Check if the swing arm has lateral free play like it was done in video. If it's there, you know what to do.
If not, get it checked by the service center.
@@MototechWanderer many many thanks bro
N yes this vedio also good nice explanation this is the way to giving knowledge to who can’t afford money not for parts for services charges n that also they taking too much charges nice u actually u helping 👍🏻
Thank you. Glad you liked it.
Bro my bike is fz v3, handle is lagging right side getting pain to arms I changed oil seals and t road throwing done means handle shocksides complete set thrw and new hanlde install, after that not getting why my arms are pulling
Does the bike pull right or left if you leave the handle ?
Slowly it pulls left side
@@MDASIFRAF how is the tyre condition?
@@MototechWanderer left side slightly slowly it pulls
@@MototechWanderer new tyre and also good front side tyres
Usefull vidoe of Yamaha fazzer v2 users
Thanks for appreciation.
you are genius bro !!
Thanks a lot!! 😊
M facing this problem FZ S V2 2015 model onli around 5000 km
So I need this parts can you please share a link to me that I can able to order on online
Please reply me
Thank you
You have to buy the spares from the dealership.
Sir mene Meri fzs ka stearing cone bhi chabge kiya bt fir bhi Khadde me Gadi gayi to aawaj bahot aati hai stearing ki khad awaj aati hai to kya swallution hoga ispr plz batao
Pehle steering column ke bolt ko tight Kar k dekho. Agar phir bhi problem na solve ho toh T-stem change Karna padega.
@@MototechWanderer sur yamaha fzs v2 steering stem ki kitni price hai ?
Bro I bought Fazer FI V2 by yesterday. During the delivery time I spent some time for inspection. And in that to check the front fork for having any play, I putted the bike in center stand. And kept the front wheel on air. Then place the handlebar in center position and take off my hands. But it wasn't fall in either left or right side. But stood still. I doubted does the front fork has play. So I asked regarding it to the service guy, he told me it's because it is a new bike. Is it true? In New bike like Fazer the handlebar stand still in the middle? Isn't the symbol of the bikes had play?
Joseph Samuel It's absolutely fine for a new bike. After some running it will loosen up and move smoothly to either sides.
Mototech Wanderer Thank you so much bro. Actually I scared a bit☺️. Now it's clear👍
Joseph Samuel Welcome. Happy Riding.
bro can you help mee..??..
mey 3,4 din pehle r15 v2 mey tyre chnge krke 140 section tyre lagaya..ab pblm yeh ho raha ki 50,60 kmph speed mey tyre ki taraf se ku6 vibration aa raha hay or foot pegs mey feel ho raha..tyre lines,both side ka space sab ku6 thik hay..fir v yeh q ho raha hay samajh mey nahi a raha..plz hlp me if you can..!
Check karo ki tire kahin touch toh nahi ho raha. Agar nahi ho raha toh kuchh nhi kar sakte becoz woh tire ka vibration hai. Ek bar tire setting dekho ... May be tire thik se rim pe baitha nahi hai. Chain ko adjust Karo and clean and lube Karo. May be chain adjustment bigad gaya hai.
Same bro...main aaj swing arm ka kam karne gaya tha....its too hard
Nikal hi nahi raha tha .. mechanic ne bike vapis kar diya...
Any solution? Already WD 40 bhi try kiya open karne ke liye...
And front weel ka bhi bearing chage karne ka required hai kya??
Try heating up the bolt.
Subscribed today your channel brother. Nice & very informative video.
Thanks a lot. 😊👍
@@MototechWanderer I am facing same problem bro. How much cost of swing arm bush. It is very difficult work how do you do that. Hats of you brother. I have Yamaha fazer v1.Are you studying in IIT. IIT student can do this. I have one question regarding mirror of fazer. Where do you purchase blind spot mirror.
@@pritishmohapatra4647 It was indeed a lot of hard work. And having the camera record all that was even more difficult. The total cost of things are said in the video. You can get the parts changed at a mechanic shop too.
beautiful presentation bro....
Thanks a lot.
In 3.1/2 years have changed 3 swing arms.
It's manufacturing defect in FAZER & FZ V2
Sahi me..I am facing same vibration issue in my Yamaha Fazer, but Yamaha service center unable to fix it up..
@@saikatbhattacharyya6979 Fazer V2 or Fazer V1 or Fazer V1.5
@@saikatbhattacharyya6979 Check the swing arm rod it will be placed near center stand both rod and bearing will be gone
Fix what I did in this video. Issue will be resolved.
@@PachaMuthu91 Fazer v2.0
Not related to con bearing but. Whenever i give throtle engine and cutch side always vibrate. And bike is not smooth while riding it always makes noise from downside in between of clutch and gear box. Any idea wht happened to my bike?? It is not smooth while riding!!
I feel it's the swing arm bearing or the rear sprocket bearing. Check both.
Check clutch plate
What is the value of two bearings?
Around 500 INR.
Bro aapko wo sari guard kaha se mila plz rply
Yamaha Dealer ne laga ke diya tha.
I am having vibration issue when RPM around 3 to 4k. Traveled only 11k km. My issue might be same as yours.
I think it's the same issue. Of bike is under warranty, get it replaced under warranty.
Thanks for the update. ☺️☺️.
Already crossed 1yrs. I guess it is out of warranty. What would be the cost of the part if needed to replaced?
500-700 INR
Thanks Bro
This video is really very useful for me.👍
Thanks a lot. 😊
Spare parts cost tell me bro.. same problem my fzs v2
Covered in video. Around 500 INR.
Bro what is the size of both bolts of swing arm?
I think it was 17mm.
@@MototechWanderer Suspension bolts are 17 mm. So, even swing arm bolts are also 17 mm?
@@technofun80 don't remember exactly. I have all the sizes from 17mm to 22mm.
@@MototechWanderer ok. I need to lubricate the swingarm. Thanks I will do it this weekend
Thanks bro the same complaint on my bike
Glad the video helped you 😊
My Fazer V1 have the same problem.. what is cost?
Now you know the reason and fix. 👍
Parts cost was around 500-700. And it's DIY so no labour cost.
For 1 pair .. am I right?
@@Aartist9 pair of bushes and the bar in between.
Great work👍
riding demons Thank buddy.
Like wise FZ 25 also having handle bar master bolt issue. But yamaha fix it freely in their services
Good to know. Thanks.
Awesome Job brother we appreciate 👌🙌
Thanks a lot! Do subscribe to the channel.
Fade the music while talking yaar...
BTW, nice video
Will take care from next time.
Thanks bro.... Same issue for me also
Welcome. Glad it helped.
Bhai Meri Yamaha fazer bike h jab mai use challata hu chote motte gadde m jaise jor se Jake patakti h bike to Esme swing ram k barring baddle jayenge Mai bahut dino pareshan hu ki peeche k monosoker to kharab to nhi h please mere comment ka answer dedena bhai
Lag raha hai shockabsorber ka problem hai. Bearing se vibration hota hai ... Magar khaddo pe dikkat nhi hoti
Nice work
Thank you. Do consider subscribing to the channel.
Excellent
Thank you 😊👍
How much does it cost?
As far as I remember around 500-700 INR.
Apka bike ka tyre konsa hea ?
MRF Zapper S 130/70 17
Swingarm bearing kitne kilometres par kharab ho jate h normaly ?
15-25k kms pe kharab hote hai. Mera 30k pe kharab hua tha shayad.
Good bro ...... perfect explaining....🙏🙏😘😘😘😘🥰🥰🥰
Thank you so much. 😊👍
I'm facing the issue in my Fzs even after changing the chain sprocket also some strange sound coming like TIK Tuk
Check the chain slack adjustment as too loose or too tight chain can cause this.
Also check of the rear sprocket bearing is in good condition or not.
@@MototechWanderer Thanks for the suggestion also bike vibrating lot if I ride more than 70 kms speed I can also feel in handle bar
@@ArunKumar-ik5ry try the above if the issue persists, check swingarm bearing also.
@@MototechWanderer Sure
bro can you mention
bearing internal and external diameter
Need to check it with a vernier caliper next time I replace them. Will keep you posted 👍🏼
@@MototechWanderer if its possible
please
mention it today
becuase i needed it today
but thanks
@@rasputin.republic sorry, I don't have these lying around also cannot remove it from my motorcycle. May be check in some forums.
@@MototechWanderer oh ok thanks,
nice video btw
How much labour charge brother
Zero. I did it myself
If you do this in service center they may charge 1500 total
Facing stability and handling issue with my FZS. Will let you know the updates.
May be time to change the tires.
@@MototechWanderer bro 15000 kms in 12 months. Bought last year Sep. Front bearings were busted. Replaced them. Now facing the handling issue as mentioned earlier... Tried to do handle loosening, tighting, no solution.
@@MototechWanderer one mechanic said, low tyre pressure. So checked and put Nitrogen. 28 PSI front, 33 PSI rear.
yamaha fzs is my favourite bike super bike good bike 👌🖒
Thank you. 😊
Kitna time lagtahe
Muje mekenik kam aatahe kiya me akela ye karsakta hu
3 - 4 ghante lage mujhe.
I just want to know about rear jumper rubber bushing up n down.
Do you mean suspension bush ?
Mototech Wanderer yes
@@AfsarKhan-vw2rm This is a little hard to find at Yamaha service centers. Try out the local market, you might find them.
r a Bangali jantam natoh.. amio Hyderabad theke... Hyderabad a Fazer Club open korle kemon hoy ?
Sure. Hoye jaak.
Bro i what to know need to change collar also with new bearing
Now you can do it yourself.
And yes, change everything together even if its not required.
Bro you changed Collar & single bearing
Diamond Mani Changed both bearings and the collar.
How much cost for Collar & bearings
Around 800 Rs I guess.
Bhai meri fzs me vibration ki problem he chain sprocket bhi change krava liya fir bhi vibration kam nhi ho rahi he or rear idhar udhar ho raha he aisa feel hota he kya kru kuch solutions do
Solution iss video me hai. Please follow kijiye aur swing arm bushes change karwayiye. Aapka problem solve ho jayega.
Bhai maine swing arm bushing change kiye fir b same problem face kr raha hu
@@govindakhachane8899 thik se baitha nahi shayad bushes. Suspension ka bush kharab ho toh woh bhi change Kar lo.
Thanks bro.....
You're welcome 👍
Good video
Simarong Momin Thank you. Don't forget to Subscribe.
How to check swing arm bearing
Watch carefully from 1:47. You will get your answer.
Ok
My fz v2 50kmh vibration handilbar plz help bro
@@farhanhameed2191 replace bearing like this video.
Swing arm bearing?
Mere fzs main front disk se aavaj aati hai jase ki disk pad disk ko ghas raha hai ise kaise fix karu +subscribed 😀
SHAKIL SHAIKH Disk ko shampoo se wash karo. Nhi thik hua toh hit the caliper with your fist few times. Phir bhi thik nhi hua toh reset cylinders of caliper. Brake shoe replacement video ko dekho for help
SHAKIL SHAIKH Thanks for subscribing.
Thanks I'll try
SHAKIL SHAIKH ruclips.net/video/XZY-j96Cg_0/видео.html
10.43 u missed to put on the chain the same mistake i did ...😅
Haha ... It's pain in the arse.
Awesome detailed DIY.
Thank u so much.
high temperaturegrease should be used.
Even normal grease works fine in this application as the swingarm bearings do not get that hot.
Fazer 2.0 ka right mirror break ho gaya h bay karne hai mujea kaha sea karu link do naa plss
Link nahi hai. Video description me ek bande ka number, usse contact kar k mangwaya lo. Waise Yamaha ke showroom me bhi mil jayega
bro r15 ka kitna price hai..,.
1.5 lakhs on road Hyderabad.
Tanks
Welcome. Glad it helped.