Tip: you don't need to unscrew the bolt of the bar end all the way in order to take it off. You just loosen the screw and the bar end with the plastic core and the screw nut go off together.
@@EmeraldGhost- It’s supposed to be loose before installation. Once you put it inside the bar tube and start screwing the plastic gets squeezed tight inside the bar.
@@EmeraldGhost-try using some white thread sealant and wrap it around the rubber a few times to thicken it up or add a extra layer of rubber washers at your local hardware store.
My stock handlebars were loosening on their own (the screw was beginning to loosen) so I put some blue loctite on them. Now, I have decided to put aftermarket handlebar sliders on and am wondering if you (or anyone else that reads this) has some ideas on how to remove the loctite screw. I've heard a heat gun will work but my concern is melting the handlebar grip. Thoughts?
There is no need to completely remove the bar-end weights, they will slide out assembled, only need to be loosened, just to help you, and other down the road. BTW if you don't need the stock bar ends let me know, I would be interested in them ? Thanks, yl
@@b-rj1171 watch Brian vans sportbike track gear video on installing a bar end mirror and he shows how to get it out I think. You have to twist the actual bar end piece but make sure you cover it with something so you don't damage it.
@@b-rj1171 srew the end piece back in and then actually spin the entire assembly out counter clockwise maybe? Cover it with a rag and use pliers if you have to.
Finally someone who is explaining how they work and you don't need a special handlebar for these.
Thanx man.
I bought from from ebay. It's was totally different from this setup but this tutorial helped me improvise and make it work!! Thanks
Tip: you don't need to unscrew the bolt of the bar end all the way in order to take it off. You just loosen the screw and the bar end with the plastic core and the screw nut go off together.
What do I do if the black plastic piece is loose??
@@EmeraldGhost- It’s supposed to be loose before installation. Once you put it inside the bar tube and start screwing the plastic gets squeezed tight inside the bar.
@@bocolis88 what if it just keeps twisting and not tightening?? Idk what I’m doing wrong
@@EmeraldGhost-try using some white thread sealant and wrap it around the rubber a few times to thicken it up or add a extra layer of rubber washers at your local hardware store.
Thanks. Short and to the point.
You just need to unscrew the screw nearly all the way out then pull and it will all come out there is no need for the nail; )
ssSTRiKEZzz
My stock handlebars were loosening on their own (the screw was beginning to loosen) so I put some blue loctite on them. Now, I have decided to put aftermarket handlebar sliders on and am wondering if you (or anyone else that reads this) has some ideas on how to remove the loctite screw. I've heard a heat gun will work but my concern is melting the handlebar grip. Thoughts?
Thanks!! Great video, heading out to my garage now :)
There is no need to completely remove the bar-end weights, they will slide out assembled, only need to be loosened, just to help you, and other down the road.
BTW if you don't need the stock bar ends let me know, I would be interested in them ? Thanks, yl
What if my new bar ends didn’t come with the longer black piece!? How do I get it to where it doesn’t come out after I tighten my bar end
good camera angle m8. made it easy to watch.
Thank you
Its weird, i got some bar ends from Rizoma. Same tightening method, but it just keeps spinning freely
First of all I use the drill to try to loosen a screw in it did nothing. I tried a regular screw driver wont move.
Thank you so much i managed to fix it on my Sym crox scooter (Sym lance cabo)
Are these the woodcraft weighted bar ends? Any part number? Because website says it fit the woodcraft bars only? Thanks
Could you put the allen key screw on the bottom so ya didnt see it by twisting it around?
Yes.
Dan T Yea you can set it however you wish. It was just easier for me to tighten/loosen it from the top.
Yes that would be true, just not the best looking to some, to some it looks even better that way.. Who I don't know ?? lol But it works though !
Cool cheers
A alenkey bolt would look nice! :D
Question! How do you remove bar end sliders? After loosening the screw, it got dangled down and I can't remove it.
What was your solution? Changing grips at the moment and now the Puck won't screw back in... Pissed
@@Itowle9 Same here at this moment.. how did YOU do it? 😞
@@b-rj1171 watch Brian vans sportbike track gear video on installing a bar end mirror and he shows how to get it out I think. You have to twist the actual bar end piece but make sure you cover it with something so you don't damage it.
@@Itowle9 You are quick mate! 😅👍🏻
I have the end screwed off, but the inner thing I can’t get out.. 😓
@@b-rj1171 srew the end piece back in and then actually spin the entire assembly out counter clockwise maybe? Cover it with a rag and use pliers if you have to.
Thank you.. Bar end 😍😅
Face bolt downward for clean look
Can I do that nail trick with a r6 or do I have to drill it??
Nice bike
How did you do the throttle side?
yesterday my left side came off, all gone, , dident notice it when y wha
s riding
Johan van hullebusch i have the same problem todaby in my drz400sm is that bad?or i can run like that?
Instead of the nail couldn't you use the screw and just pull the two pieces out on one go
How do you find the measurements for the bar ends ?
what brands can be used,how to get these items in indonesia thank you
Is the throttle side the same way
Faster way unscrew 95% then just pull it all comes out as one unite 😜
good .. many thanks
Kya ya sirf indicater k sath hi jalta ha lights
Thanks m8
Thank you!
the allen key screw should at the bottom!!!!!!!!!!
Kaha se kharide bhai
And possibly a Nell. I'll show you what I use a Nell for.
Good vid
How not to install barends.
1:59 I actually ended up pushing it inside until it wont come out anymore 🤦🏻♂️
pulser 135ls ke kese lagayenge
Passion pro may Kasey instol kary voo video batoo
how much price
4:47 "Mine doesn't shit flush"...
Wow
I wonder why people without any skills try to teach something to others??
Good will perhaps. Contrary to your self gratifying comment.
Md noshad
No te doy like. Porque se te cayo la alien. Y el perno posicion hacia abajo. Se ve feo arriba.
ok