Beam Detailing using Etabs Result
HTML-код
- Опубликовано: 20 июн 2019
- Watch how to draw Beam Details using Etabs Result & Excel sheet prepared by DECODE BD. This is another part of 10 Storied Building Design Course.
Excel Link- drive.google.com/open?id=1IgC...
#BeamDetails #Rebar #Etabs
The tutorials which I watched on youtube are fair but this channel is really unbelievable since I joined. thank you so much again and again...
You're very welcome!
More power to you sir!! 🙌🏻🙌🏻
Thank you 🙌
Sir I need a help...In Staad RCDC Connect Edition the ETABS file or the Exported Access files are not opening.. showing a dialouge "Unable to find analysis result" how I should fix it?
Thanks . I'm learning Etabs . Can i ask you? After linear calculation of concrete , you calculate the buiding nonlinear? If yes, it's complicate?
Sir Your Vedios are always very helpful for us Structural Engineers.
Just wanted to add that shear reinforcement design too could have been included in the vedio.
Good point. Will add that also in sha Allah.
Thank you sir you always doing job keep it up sir
Welcome.
U r so amazing
Thank u
Welcome & Thanks for the complement.
It is really helpful. tnx.
Wc
Excellent work sir
Thanks
If in a plan two columns grid lines are just 100 to 150 mm apart then how we model it on staad pro or etabs ?
Tekla structural designer and Etabs out of these two which one is better and user friendly to design structures
thanks you so much sir
Welcome
👍🏻
Thank u
Sir where are the excel files for Slab thickness design and deflection, p delta checking files?
ohooooo! amazing work sir. many thanks please upload video on how to create those excel sheet so we can create excel sheet with respect to our country code.
Thanks. Will try in sha Allah
@@Decodebdin shaa allah. warmly welcome.
Assalam alaykum sir i have been studying your excel sheet i have a question need your help ... that 0.62 is the percentage of steel? and to get 0.62 did you take area of steel divide by total area of concrete?.. and this 25.4* 25.4 is the area of concrete and in which units? kindly waiting for your reply in shaa allah.. thanks
Assalamoalaikom Brother, ,
are you teaching sap software for STRUCTURAL design?
I saw that your values are from etabs are in ft!! But do you really make this Excel in ft or inch??
Also sir please make a similar vedio of Column design results too. Will be thankful and appreciative.
Column design already shown in previous tutorials.
@@Decodebd okay sir. Thank you
By any chance you have excel sheet for reinforcement calculation in meter😇
Very helpfull
Thanks
What about shear reinforcement?
Does column reinforcement always decrease as we go to the higher floors of a building??? Please answer sir.
no, sometimes it demands more steel than lower stroy due to lateral loads
Pls make videos on structure elements detailing using IS codes ....
Sir I request you to please make videos about estimate costing this will be very helpful for me thank you
Will try.
thanks vai
Wc
Is is suitable for IS 456???
#Need this excel sheet bt sorry to say i did not find it sir...Watch full video tutorial bt i cant find it..any help plz sir..??
Sir please make videos on detailing of column beam and slab as per Indian code...
sir could you please share as per IS CODE recommendations
The excel link you are provided is not same as on video
thanks.
Welcome
sir as per IS code .....available?
Good
Great tutorial, please send me the link to download Protastructure 2019.
Thanks. Prota Structure is bought from Prota Company. You can ask for quotation from their website.
Sir full AutoCAD 2d drawing of residential building needed
Some value showing red color. Why?
Assalamoalikom
masaALLAH
W.Salam. Jajak Allah.
Hlw sir..Does this excell sheet work for mm square unit?..plz mention
if you are using meter as units in etabs, the rebar needed which is required is given in mm^2. so just don;t divide with (25,4*25,4) and it with be mm^2
Column beam detail..can i use this method as per IS code?
Yes. Design your model in IS code then use the excel for detailing.
@@Decodebd sir..we are using 12mm bar also as per IS code..but your excel sheet starting from 14mm to 30mm bars....I need 12 mm bar..wt should i do..wt is the procedure to edit.... Pls give your suggestion
And please make a video about shearwall detailing there are no videos available on RUclips about shearwall detailing
Coming soon in sha Allah.
here you enter the rebar area as inch square right?
Yes
Can we enter the rebar area in mm square in this ecxel plz mention??
Sir. Do you calculation torsion rienforcement?
Here not shown, but we have consider that.
@@Decodebd thank you.sir
Can you pls share that Excel sheet?
Please watch the tutorial carefully/fully then you will find the source link of the excel. It is mentioned.
Sir, what is reason why beam no rebars and other had rebars in csi detailing
Null beam will not have no rebars.
Sir all beams no rebars but wall, slab, column are all ok
Which beam data is taken for check detailed design of beam .How to find out??? please reply
SIR, ESTIMATE AND COSTING NIY VIDEO CREAT KORBEN..PLZ
Excel sheet required
Please watch the tutorial carefully/fully then you will find the source link of the excel. It is mentioned.
sir i want to work with you and want to learn
Hope one day in sha Allah.
@@Decodebd but how sir ?