Hi, I have to buy a stabilizer for the bmpcc 6k to use with the Tokina Cinema 16-28 zoom and the Tokina Cinema 50-135. I'm undecided between Zhiyun 3S Pro and Zhiyun Crane 4. Which one do you recommend? Thank you very much.
But I found that the FX30 is on the compatibility list of the Crane 4, you can take a look, on page 10: zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20230817/1692253632393-kZDdhJAN.pdf
You may refer this list and find your camera to refer the related setting: zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20240328/1711614346888-j55bNjTr.pdf
hey my friend i have a problem with crane 4 ...iam using Lumix GH6 and G9 unfortunately the rec button when i half press it doesn't focus only if i press it harder its recording...is it normal not focusing on half press...?? can you give please a solution
tengo un problema tengo un crane 4 y lo uso con un canon 90d cuando los conecto con el cable funciona todo menos el boton de grabación, me pueden ayudar?
I bought a Zhiyun 4 crane a week ago, but it doesn't work at all, when I turn it on it asks for an upgrade and writes a (failure) message on the screen! I have a MacBook Pro, I downloaded the firmware but it cannot be installed on a Mac device! please how can I fix this?!
Bought two days ago but everything works fine but when i press record button it starts focusing no start recording on both my cameras Sony a7siii and Sony a7iii only to control wheel iso with cable and Bluetooth problem Works fine, I tried everything. Someone has the same problem
1. When are you going to make a gimbal with a removeable battery? 2. Light interferes with low shots, have to do figure 8 twist to invert. 3. No auto-lock feature 4. Mount plate can come off if you don't slide it all the way to right before locking (bad) 5. These are design flaws. If you want to be taken seriously, you need to address these issues. The crane4 is otherwise a good product.
Bought two days ago but everything works fine but when i press record button it starts focusing no start recording on my camera Sony a7iii only to control wheel iso with cable and Bluetooth problem Works fine, I tried everything. Someone has the same problem I have searched intwrnwt and there is no information about it
Hi! For Photo/Video Button, Half-press: Activate auto-focus on certain cameras Long press: Take a photo Single press: Start/stop filming a video You may try to press it harder. 😊😊
This gimbal has a big problem, without warning it remains like a paperweight, it does not charge the battery, if you connect it to the charger it says update and the following failed remains in that block. The motors do not activate, it seems to be in sleep mode and the technical support does not answer, I changed a unit for that same problem and now it happens to this other one, I have searched intwrnwt and there is no information about it plz dont by this product
Please don't buy this think. Crane 4 after 5 mounths it's decided to stop working. And all this issues appear at same time Crane 4 "update failed" it doesn't hold any charge it seems to attempt to update, then "fails" plugging into my pc doesn't give it any life can't connect to ZY play to update it
Hello I want to tell you that ziyun Crane 4 Gimbal is of very poor quality, it seems to be dead even if you have bought it, think that it can be dead anytime, after 15 days or 1,2 months, you should not buy it. I am worried here because the zhiyun service of life is very bad which I don't like, I am going to fix it very soon by making a video for review please don't buy.
Please don't buy this think. Crane 4 after 5 mounths it's decided to stop working. And all this issues appear at same time Crane 4 "update failed" it doesn't hold any charge it seems to attempt to update, then "fails" plugging into my pc doesn't give it any life can't connect to ZY play to update it
Great Tutorials! I really appreciate the help. I followed through both and feel a lot more comfortable and excited to use it!
hey I'm having an issue with the gimbal going into sleep mode, every time I use it.
Is there a active track on Zhiyun Crane 4?
Thanks so much for explaining! Very smooth and simple! 🙏🏽
Thx buddy, really helped me 😁👍
Hello, great tutorial. The main problem that i faced is when balancing the pan axis, any other clues ?
Hi, I have to buy a stabilizer for the bmpcc 6k to use with the Tokina Cinema 16-28 zoom and the Tokina Cinema 50-135. I'm undecided between Zhiyun 3S Pro and Zhiyun Crane 4. Which one do you recommend? Thank you very much.
I have a Canon R5c and the gimbal does not work as a power bank, any solution? Please
As I know, Crane 4 camera control port can Output 5V 1A, whether your camera can be power supplied, it depends on your camera itself charging logic.
great explanation. Thank you.
WHY NIKON Z8 AND Z9 CAMERS CANT BE CONNECTED BY BLUETOOTH ?
Awesome gimbal can we add extra battery
It is with built-in battery. But support use while charging.Maybe a power bank which meet the PD protocol can work with it.
How about canon can be use gimbal power bank?
Crane 4 camera control port can Output 5V 1A, whether your camera can be power supplied, it depends on your camera itself charging logic.
I feel very sad for the reason that it is not compatible with fx30 could you please update to be compatible with fx30 either by cable or Bluetooth
But I found that the FX30 is on the compatibility list of the Crane 4, you can take a look, on page 10: zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20230817/1692253632393-kZDdhJAN.pdf
Thank you very very much!
can this gimbal be connect on BM 6K PRO FOR USING REC BUTTON ON GIMBAL?
It support cable connect with BMPCC 6k pro for record control.
Hi how can i get out sleep mode for the gimbal?
Hi! Long press Mode Switch to sleep/wake mode for the gimbal motors.
I can't find that USB in the menu of my canon R6mkII, can you help me?
You may refer this list and find your camera to refer the related setting: zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20240328/1711614346888-j55bNjTr.pdf
hey my friend i have a problem with crane 4 ...iam using Lumix GH6 and G9
unfortunately the rec button when i half press it doesn't focus only if i press it harder its recording...is it normal not focusing on half press...?? can you give please a solution
Hi! For Photo/Video Button,
Half-press: Activate auto-focus on certain cameras
Long press: Take a photo
Single press: Start/stop filming a video
You can provide the related video to us for further help! 😊😊
tengo un problema tengo un crane 4 y lo uso con un canon 90d cuando los conecto con el cable funciona todo menos el boton de grabación, me pueden ayudar?
Make sure you use the Type-C to Micro USB LN-MBUC-A02 camera control cable to connect them, and power on the gimbal first, then the camera.
I bought a Zhiyun 4 crane a week ago, but it doesn't work at all, when I turn it on it asks for an upgrade and writes a (failure) message on the screen!
I have a MacBook Pro, I downloaded the firmware but it cannot be installed on a Mac device! please how can I fix this?!
Hi! Sorry for the inconvenience! It is recommended that you contact your seller ASAP! 🥺🥺
I brought it from Canada through my friend, I thought it will be a good, and strong product, but it not even working!@@zhiyunsupportglobal706
Bought two days ago but everything works fine but when i press record button it starts focusing no start recording on both my cameras Sony a7siii and Sony a7iii only to control wheel iso with cable and Bluetooth problem Works fine, I tried everything. Someone has the same problem
I think you may half-press the button, reach the auto-focus fucntion, fully press the phone/video button down, then you can start or stop video.
1. When are you going to make a gimbal with a removeable battery?
2. Light interferes with low shots, have to do figure 8 twist to invert.
3. No auto-lock feature
4. Mount plate can come off if you don't slide it all the way to right before locking (bad)
5. These are design flaws. If you want to be taken seriously, you need to address these issues. The crane4 is otherwise a good product.
Bought two days ago but everything works fine but when i press record button it starts focusing no start recording on my camera Sony a7iii only to control wheel iso with cable and Bluetooth problem Works fine, I tried everything. Someone has the same problem I have searched intwrnwt and there is no information about it
Hi! For Photo/Video Button,
Half-press: Activate auto-focus on certain cameras
Long press: Take a photo
Single press: Start/stop filming a video
You may try to press it harder. 😊😊
same here doesn't record on my sony a7iv, tried everything from changing Control dial to reconnecting Bluetooth
@@ReianViernes Hi! Please try to press the rec button harder~ 🌹
@@zhiyunsupportglobal706 I tried it many times
This gimbal has a big problem, without warning it remains like a paperweight, it does not charge the battery, if you connect it to the charger it says update and the following failed remains in that block. The motors do not activate, it seems to be in sleep mode and the technical support does not answer, I changed a unit for that same problem and now it happens to this other one, I have searched intwrnwt and there is no information about it plz dont by this product
Was this guy your best choice for a tutorial video?
Indeed!
..he forgot to mention that the app had a rating of 2.2. Doesn’t inspire confidence..
Please don't buy this think. Crane 4 after 5 mounths
it's decided to stop working. And all this issues appear at same time
Crane 4 "update failed"
it doesn't hold any charge
it seems to attempt to update, then "fails"
plugging into my pc doesn't give it any life
can't connect to ZY play to update it
Hello
I want to tell you that ziyun Crane 4 Gimbal is of very poor quality, it seems to be dead even if you have bought it, think that it can be dead anytime, after 15 days or 1,2 months, you should not buy it. I am worried here because the zhiyun service of life is very bad which I don't like, I am going to fix it very soon by making a video for review please don't buy.
Please don't buy this think. Crane 4 after 5 mounths
it's decided to stop working. And all this issues appear at same time
Crane 4 "update failed"
it doesn't hold any charge
it seems to attempt to update, then "fails"
plugging into my pc doesn't give it any life
can't connect to ZY play to update it