While it looks a little brutal, this guy is incredibly skilled. Swinging a heavy hammer in a confined space like that, without clipping the boot is a lot harder than it looks! Try it some time. You could make some good money with skills like that.
Thanks to this video I was able to do this service in my 1990 260E!!! The only difference is that I don't have a lift and used an hydraulic jack instead. Regards!!!
This is how you replace the ball joint! Put some Modern Talking on the radio and get the hammer out 🙂 Looks like the shovel is used to hold the spindle away. Nice work!
Danke! Habe jetzt 2x Traggelenk am w124 getauscht. Einer ging wirklich wie auf dem Video, doch einer wollte erst nicht raus ( 5x so viele Schläge) und wollte danach nicht rein. Aber ohne das Video hätte ich mich nicht getraut die beiden an einem Abend zu wechseln :) Ohne Hebebühne natürlich, drei gute Wagenheber vorausgesetzt. Einer am besten Stempel.
Absolutes TOP Video. Du hast mir echt sehr weiter geholfen! Ich habe es eben genauso gemacht, nur ohne Hebebühne. Es geht auch mit einem Wagenheber und 2 Stützböcken. Vielen Dank fürs hochladen!
Ich habe gestern ein Video davon hochgeladen. Da ich Dein Video als Anleitung hatte, habe ich es mal in meinem verlinkt. nochmals danke, wäre für mich viel schwerer gewesen, ohne Deine Anleitung!!!
Hammer. 😂 Bei euch sieht das aus wie ein Spaziergang. Ich habe mit viel wd40 und nem dicken bello versucht die schei*e da raus zu kloppen. Aber jetzt ist es gemacht. Top Video.
Einwandfrei,denn so habe ich meine vor 5 Jahren auch rausgekloppt..Ohne Presse und /oder Querlenkerausbau...Einfach nen guten Hammer und Lenker abstützen. Meine waren aber fester drin,vergammelt.
I tried this method and failed to remove the ball joint even though I hit it with a sledge hammer. May have to take the control arm out and find some place with a press.
Do schnell habe ich das noch nie gesehen. In meinem W124 E280 Limo gingen die Traggelenke nur mit einer 40t Presse heraus und entsprechend wieder herein. Ab dem E320 darf man nur die Traggelenke inklusive Querlenker erneuern.
Hallo, sehr gut und anschaulich gezeigt. Kann eigentlich mit der Feder nichts passieren? Hab teilweise schon gelesen, daß sie entspannt bzw. gesichert werden soll. Danke für die Antwort.
Hurray some one that does this properley not the ones stripping spring out roll bars ect ect the proper tool would be better for removing and installing as it puts less stress on lower arm but hay it works
I have replaced mines after an accident where one them pop out at 30km/h, now after replacing both of them, every time i hit a bump on the road my whole steering wheels shake a lot, do you know what can be the problem?
Ich habe es auch so gemacht bei welchen w124 allerdings ging keiner dieser Traggelenke nach so wenigen Schläge raus 😂😂😂😂 ich habe immer mindestens 130 mal schlagen müssen
This guy makes it look easier than it is. Very well done.
While it looks a little brutal, this guy is incredibly skilled. Swinging a heavy hammer in a confined space like that, without clipping the boot is a lot harder than it looks! Try it some time. You could make some good money with skills like that.
Thanks to this video I was able to do this service in my 1990 260E!!! The only difference is that I don't have a lift and used an hydraulic jack instead. Regards!!!
This is how you replace the ball joint! Put some Modern Talking on the radio and get the hammer out 🙂 Looks like the shovel is used to hold the spindle away. Nice work!
An agile and applied ultra-efficient method that works wonderfully in no time BRAVO & THANK YOU for the video
Thank you for recording this! Helped me to change the balljoints in my w124
Great video, I knew these could be changed without removing the spring. Also that's a very nice Hazet impact gun. Grussen aus Arizona
Danke!
Habe jetzt 2x Traggelenk am w124 getauscht. Einer ging wirklich wie auf dem Video, doch einer wollte erst nicht raus ( 5x so viele Schläge) und wollte danach nicht rein.
Aber ohne das Video hätte ich mich nicht getraut die beiden an einem Abend zu wechseln :)
Ohne Hebebühne natürlich, drei gute Wagenheber vorausgesetzt. Einer am besten Stempel.
Absolutes TOP Video. Du hast mir echt sehr weiter geholfen! Ich habe es eben genauso gemacht, nur ohne Hebebühne. Es geht auch mit einem Wagenheber und 2 Stützböcken. Vielen Dank fürs hochladen!
Ja, so funktioniert es auch ....
Ich habe gestern ein Video davon hochgeladen. Da ich Dein Video als Anleitung hatte, habe ich es mal in meinem verlinkt. nochmals danke, wäre für mich viel schwerer gewesen, ohne Deine Anleitung!!!
Habt ihr die Stoßstange abgebaut um mehr Platz zu gewinnen?
Hammer. 😂 Bei euch sieht das aus wie ein Spaziergang. Ich habe mit viel wd40 und nem dicken bello versucht die schei*e da raus zu kloppen. Aber jetzt ist es gemacht. Top Video.
Świetny film i niesamowity mechanik prawdziwa klasa brawo !!!🤩
I saw the hazet and I knew I came to the right place.
Hard core,rugged raw yet with finesse Nice
Just watched someone remove the strut and go to a lot of trouble to do what you didin five minutes!
Im doing it your way for sure👍
Wir können Modern Talking im Hintergrund hören. 👍👍
Dirty style. Love it.
Do you need a spring conpressor? Isnt it dangerous without one?
How come you didn't clamp the spring?
Und so wird es auch beim SL R 129 gemacht ?
Спасибо за это видео мне он очень помог остался на дорого шаровая слетела от рычага сделал за 10минут СПАСИБО👍👍👍👍👍👍👍👍👍👍👍👍
Einwandfrei,denn so habe ich meine vor 5 Jahren auch rausgekloppt..Ohne Presse und /oder Querlenkerausbau...Einfach nen guten Hammer und Lenker abstützen. Meine waren aber fester drin,vergammelt.
Hahaha the channel name is brutally honest!
Extrem GEIL !!!
Very skilled! Nice.
Wenn meine doch auch nur so leicht rauskommen würden 🙈
Best video, no fucking around
Ist aber schon die Russische Art Traggelenk zu Tauschen.
I tried this method and failed to remove the ball joint even though I hit it with a sledge hammer. May have to take the control arm out and find some place with a press.
Same here
Awesome! This guy did it in 5 minutes. Benz probably wants 3 book hours and $$$$$ in specialty tools, lol.
So not the correct way to do, more like Jeremy Clarkson style, but I must admit that it's effective and quick..
Haha very true! Speeeeeed and pooower!!!
Just did mine, thanks !!!
Thanks video made it easy to do mine
Do schnell habe ich das noch nie gesehen. In meinem W124 E280 Limo gingen die Traggelenke nur mit einer 40t Presse heraus und entsprechend wieder herein. Ab dem E320 darf man nur die Traggelenke inklusive Querlenker erneuern.
My 1993 320CE has replaceable ball joints…they went to non replaceable in 1994 E320.
Hallo, sehr gut und anschaulich gezeigt. Kann eigentlich mit der Feder nichts passieren? Hab teilweise schon gelesen, daß sie entspannt bzw. gesichert werden soll. Danke für die Antwort.
Super Video 👍
Mecânico que trabalha com marretas, é jncompetente
PERFEKT DANKE!!!!
Smoothly!
Hurray some one that does this properley not the ones stripping spring out roll bars ect ect the proper tool would be better for removing and installing as it puts less stress on lower arm but hay it works
And play modern talking 👍👍👍👍👍👍
Zo werken ze in de broesse
Thanks for the Video
Und ich wollte mir schon einen Abzieher kaufen!
I have replaced mines after an accident where one them pop out at 30km/h, now after replacing both of them, every time i hit a bump on the road my whole steering wheels shake a lot, do you know what can be the problem?
control arm is kaput
Brutal. Should have dismantled and replaced that brake disk back plate.
This lemforder ball works more then 100 000 km
Muss danach Spur usw wieder eingestellt werden?
Normalerweise nicht!
Nein
Brilliant
Ich habe es auch so gemacht bei welchen w124 allerdings ging keiner dieser Traggelenke nach so wenigen Schläge raus 😂😂😂😂 ich habe immer mindestens 130 mal schlagen müssen
Ha ha somebody show this video to MB the easy way to do it.
Moin, von welcher Firma ist das Traggelenk?
original Mercedes-Benz
Mercedes-Benz
Top
Wow, in drei Minuten gewechselt. 😳
1:29, I always cringe when I see this kind of workmanship. These joints are supposed to be pressed out, and back in.
howdy from america
Jassar Sami Alzyoudi
👍
holy shit
A ja głupi wyjmowalem wahacze. 😂
Bad hammer shocks,use à two-point extracteur.
Чудесно!
yourcashismycrash 😁