If only that AEG was from around 2012 or ealier it would handle even better. I was actually surprised it jumped with snow and threw an error 2 times hahah
Try putting it on service mode next time. First turn the machine on then hold immediately the last 2 buttons on right at the same time for 5 secounds. If its in service mode, turn it to Spin. Just a tip.
Damn and there was one in the house I bought left by the old owners, and the drum broke off after 2 weeks... I cant imagine how much abuse it's been through... I've had a top loader from AEG and used it literally a zillion times, sold it working like a charm.
Hey :) I have some questions (again) Question 1: If you had a beko tumble dryer, would you buy a Bosch dryer to complete your washing machine, would it be Beko? Question 2: What Beko equipment do you not recommend? :) Thank you in advance for your answer! :)
here it is. Electrolux has recently been heavily complained due to faulty PCB problems, just after not more than 2 year use, unfortunately even 2021/2022 models that they released new Ultimatecare second generation, they still don't add water resistant glue onto PCB, while in my country, humidity is pretty high especially during summer when rainy days are more than dry/sunny days from dry season like on this time. if some water goes in then PCB dies, just like my Hitachi washing machine that died even it was not abused 😐. Electrolux made very good washing machine but now i don't like it
To everyone here, it just shows errors because its unable to reach 1600 with so much unbalance. Nice vid also!
Thank you! :)
@bogdannb can you make a video of amana nfw5800hw4 washer destruction please?
E59 means that because of extreme unbalance it cant speed up as it dosent have that much power or just it dosent want to self destruct
Ok thanks!
No it doesn't mean that it actually means that there is a motor fault or an internal component failure.
If only that AEG was from around 2012 or ealier it would handle even better. I was actually surprised it jumped with snow and threw an error 2 times hahah
It still handles well! I like it!
still handles better than vestel…
what picture did you have on your avatar before you put the picture of the washing machine drum there? I know strange question
Finally another stress test 😌
Kjakkakkakaiiiiiiibb😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤💤😁💤😁💤😁💤😁💤😁💤😁💤😁💤😁💤💤😁
@@dudasattila9811 shut up
@@dudasattila9811are you okay
Now do a boilwash. I wonder how long will it take to reach 95° with soo much snow
is beko bad only in lithuania?
i have error f-05 on my hotpoint. Any help pls thts my only washer
Try putting it on service mode next time. First turn the machine on then hold immediately the last 2 buttons on right at the same time for 5 secounds. If its in service mode, turn it to Spin. Just a tip.
6:36
If the digital display on your washer showing any of the following error codes E59, the likely cause for this would be a defective motor.
Lol...e59 means the pcb is detecting that the motor isn t able to reach the set rpm🌨️⛄
Yes yes😎🤣
Try this at home 😍😍😍
ikr
Here is portugal there is no snow 😭😭😭
@@vasquitxo same here in romania :((((
@@alpitu21 :(
@@alpitu21 rip
Damn and there was one in the house I bought left by the old owners, and the drum broke off after 2 weeks... I cant imagine how much abuse it's been through... I've had a top loader from AEG and used it literally a zillion times, sold it working like a charm.
It hurts me but it handled pretty well
Thought it would handle a bit worse considering its a slim machine
I didnt even know AEG was slim😨🤣
good video, love it! ❤️
Thank you😍
Just checked service manual E59 is no tachosignal for more than 3 seconds
Hey :) I have some questions (again)
Question 1: If you had a beko tumble dryer, would you buy a Bosch dryer to complete your washing machine, would it be Beko?
Question 2: What Beko equipment do you not recommend? :)
Thank you in advance for your answer! :)
I would probably never buy Bosch tumble dryer. :)
And I reccomend everything made by Beko :)
Please do even heavier carpet!
@WashingMachine7612 For now. He said in a post that we'll have to wait until the end of the winter for carpet tests it's too cold.
E59 = engine can't turn proberly. The reason was probably the unbalanced spin at 1600
E59 it cant reach 1600
@@SamsungLad2005 Yes, the engine was overtex for reach the 1600
@@Miele360 ik
nice machine
E59 is no tacho signal for 3 secs btw
What is mean e59
ITS BANGING
Is the motor error because maybe it hit the ground
It couldnt reach speed haha
@@bogdannb and just for that e59? It should reach it without giving up
I would've love to see, when there was water in, and heats it to 95'c, with the snow in it.
It was -6 that day + snow. It would run forever haha
1600rpm and Slowing down and E59
Aeg be jumping😂
It wasnt plan to make it jump but task failed successfully haha
Still not as cold as Candy🍏
Boilwash in candy be like;
@@bogdannb or indesit boil wash be like
But why?🤷♂️
Give me the machine 😍
That looks like it’s spinning 1200rpm while covered in snow 3:36
An older model from before 2009 would have handled way better
Yeah… like any other brand… today everytbing is worse :/
Samsung: bruh cool 😊
Class
😍
Why is there snow in serbia 😭😭😭😭 there is barely ANY snow here in Romania... Bruh😔😔
+ It sounds like a meat grinder lmfao
Oh we have so much snow every year 🤓
@@bogdannb usally here it just goes up to an inch then melts within the next minute 🥸
Didn't handle too bad :)
Yeah! Its really sturdy machine actually :)
Not being hoover that paddles fall off at least 😜
ne için? 🤔
Aeg vs overload
If You throw snow in the washing machine it's going to get cold
The snow has been planted
Finally
E59 is an unbalance error the machines that make errors are usually a shit
Error 59
Jum
Not fan of these new electrolux,aeg and more. They have so many faults cheap build quality terrible washing and extremly weak shocks and motor.
here it is. Electrolux has recently been heavily complained due to faulty PCB problems, just after not more than 2 year use, unfortunately even 2021/2022 models that they released new Ultimatecare second generation, they still don't add water resistant glue onto PCB, while in my country, humidity is pretty high especially during summer when rainy days are more than dry/sunny days from dry season like on this time. if some water goes in then PCB dies, just like my Hitachi washing machine that died even it was not abused 😐. Electrolux made very good washing machine but now i don't like it
E59 Brocken motor
No, the engine was only overtax because it was to unbalanced for 1600
Contrats 25k
That Cause $500
Indesit plissssss
E59 tachometer fault - no tachometer signal for 3 seconds
Yes. 🤣
You're burning the motor up and you're broken the suspensions can you be careful the belt can break too
It's inverter motor
Well that went well, it's already broken😂
No, E59 was only because it was to unbalanced for 1600
@@Miele360 No its too unbalanced the spin and cant reach max speed
Its just error for not reaching speed
@@bogdannb Agree
NAPOKON AEG EKSPERIMENT WOOOO
🤓
WOW! 😲
kkhk
First