Repair/ Replace Honda Odyssey Intake Tube/ Hose 2005- 2010
HTML-код
- Опубликовано: 6 сен 2024
- Honda OEM part number: 17228-RGL-A00
I ordered it off Amazon. www.amazon.com/...
How to repair/ replace the rubber intake tube connecting the air filter to engine, for the Honda Odyssey. This is a common problem for old Honda's. The intake tube is rubber; and when it gets too stiff sometimes it will crack, break, tear, rip, split, etc.
2005, 2006, 2007, 2008, 2009, 2010 models
Great video. Thanks for taking the time. For anyone trying this easy repair, I suggest removing the air filter box lid. This makes it much easier to put the hose on the box lid side, and then the whole thing slips back onto the engine side.
Thank you very much for posting this video. 2 years later and your still saving us money on costly shop repair costs.
This was very helpful. Thank you for making this video. I don't fancy myself anywhere near knowledgeable about cars but I can't afford the high prices my mechanic charges for simple jobs. I've come to the conclusion I need to learn to do some simple maintenance and repair on my own. I found getting the old part out super easy once I was able to unplug the sensor (it takes hand strength I don't have, but getting the new part in super hard. The new part is harder and less flexible so it took some elbow grease but I got it done! Knowing and seeing the step by steps before hand made the whole process less scary and less frustrating. So thank you again!
Thanks! Fixed it myself for $23. Great video
Thank you for placing this video on YT. I just got quoted $161 + tax to replace this part. Will use the video and replace it myself for part costs.
was quoted 120, idek if that included labor. i shall do this as well!
@@fakeanimegirl it was super easy to do!!!
I was quoted $180 at the dealer. Grabbed the part for $35 and did it myself. 2009 Pilot. Thank you!!
Great video. I noticed that my hose was cracked at the intake side in multiple places. Your video was just what I was looking for. Thank you for posting the details.
Thanks so much for this! We got it done in no time, thanks to this. -- Ours looked almost identical to yours, right down to the duct tape sealing the leak. Now to see if that makes the "check engine" light go off. The Honda dealership wanted $750 to replace the O2 sensors. I'm hoping the $30 replacement solves the problem.
KatsyFGA Thanks for an update, I hope it fixes your check engine light. I hate giving them my money!
Thanks so much for taking the time to post this. These types of posts are ALWAYS helpful.
Mike
Thanks I just learned something my hose was ripped now I will fix it this weekend
Thanks for posting, this disabled housewife managed to change out the bad hose on my van.
I did too! feels awesome!
Thanks for the video. You save me about 120 bucks as well! Although I will mention that I have a 2009 pilot and that damn line is a pain taking it out and putting it back in.. LoL
I’m pretty proud of myself finding the reason my emissions light was on, a cracked air intake hose and got the part, ($50, was that reasonable?) It took me almost 3 hours to install. Not the 5 minute you tube demo! Still, not bad for 63 year old lady, with no car knowledge or mechanical aptitude or decent tools. My 98 Honda accord v-6 has a canister that attaches to the bottom, I realized after cutting the broken hose in half,getting it off and reconnecting everything that I should have attatched the hole in the bottom of it first, it was really difficult getting the rubber over the opening of the plastic canister and screwing on the metal clamp., but I didn’t want to undo it all and start over.. I was feeling so confident I thought I would change the air filter, but the screws to the air filter box are stuck, rusted in and strip as I try to turn them. Any thoughts on how to remove them? And my emissions light remained on and the car is still hesitant to start, which, before it always started right up. Still, I appreciate the knowledge, if I can do it, anyone can.I just hope that bottom part hold up well.
i will happily subscribe not only that i like the video ...very clear and easy to do...i feel i don't have to watch another video this one will do...thank you!!!
Disconnected battery first. Throttle began to fluctuate erratically because the computer was out of control an hour later. Had to reset the computer about 4 times. Turn off the cruise control. All because I changed the cracked hose for a new one. Also dont drop the hose clamp while doing this.. never found it after it fell above the transmission labyrinth of gaps.
Main reason these Break is because the engine mounts go bad allowing too much lift especially when it’s in reverse. So please check motor mounts as well if you have this problem. By the ways these Odessa’s has always had issues with mounts.
Mine is currently being replaced at dealer. $15 for part, $26 for labour. What symptoms did you experience with the cracked tube? My 2013 civic jerked at 3000rpm.
Thank you for posting this video. This is very helpful.
Can changing this cause a check engine light to appear for code P2176?
What is that tube called that you pulled out of the intake hose? And where can you get that metal clip that was used to fasten into the intake hose? (Name of the clip?)
Sucks you didnt show the battle of getting the hose back on the air box
1:50 I'm really, really tedious, ask my friends and co-workers. I even keep old phone books around for my reading pleasure.
PS: Just kidding. Thanks for posting
i need to do this with my honda accord 03 so it'll smog! i can't find a video for that model, but this look just like it...
same here 05 accord was just wondering how to get that spring looking thing off lol
I would, but unfortunately I don't know how. I will as soon as I learn properly.
Thanks!
I have noticed that Honda has many small issues like this. Some have issues with a condenser, all of the callbacks, and the air intake hose gets cracked easily.
With me is the power steering pump . I changed it prob 3 times n that thing is always leaking . N now that i took it to get oil change they broke my air duct but suppostly it was like " that". What a coincidence
Mine is cracked too because i use to take it to walmart oil lube. Thos epeople there they dont care about that . Just to make money. Ooohh look ur air filter need changed.
Thank you
Thanks for the part #. Yahooooo!
Buena enseñanza.gracias.
Can u show how to replace breaks in TSX
Thats because when u take it in service the guys from there they just pull that thing hard. They dont care it gonna break it
Service center guys are told to create extra work.
$28 oil change income is not their target. "FREE" 28 point inspection cost users a lot more than needed.
Thanks so much
mine is cracked a little bit too. and the check engine light turned on. if I replace this too, will the check engine light turn off?
just curious... how it solved.
Do you have a link to buy the part for Honda PIlot 08 SE
was that duct tape on the old hose?
I want to temporarily do something for my cracked hose and wondering what that tape was on your old hose.
I think duct tape is fine. I had some heating/ cooling tape in the garage and just used that. I think its fine for a couple days just so no dust and dirt gets sucked it. It's certainly better than leaving it open at least.
nsaeturn815 I used duct tape on mine, when I discovered the crack the day before leaving on a 1,067-mile, 15-hours-in-one-day trip. The "check engine" light had already been coming on intermittently, and it was attributed to the O2 sensor or some other minor problem, so I felt okay with going. Worked fine -- in fact, the "check engine" light stayed off after my 2nd fuel-up, 2/3 of the way home, which made me feel a lot better.
I just watched this guy use super glue and then silicone glue.
Im trying that
What gonna happen when Intake tube crack?
kinda late but the car goes into limp mode, meaning the car's computer wont let you accelerate it normally, instead it will be very sluggish, you wont get passed 40 mph
eBay has them for 15-30$ save money do it your self
that spring was a female dog 🐕 to put back lol
Mine disconnected trying to take it off the old hose, I reconnected it, then was a bitch trying to get it on new one. He doesn't show us THAT process !!! But we figured it out, huh ???
Part number please
There's a link in the description.