Jeep Tj Fuel Tank Removal DIY How Too
HTML-код
- Опубликовано: 21 окт 2024
- Get the 5/8th fuel clip here amzn.to/2FjUTss
Get the 5/16 and 3/8 fuel clips here amzn.to/2TbmUFF
Canadians get the 5/8 fuel clip here amzn.to/2DBjOpJ
todays video i'm dropping the fuel tank in my 2003 jeep tj, this wasn't a job that I wanted to do but I needed to make a repair and fuel tank needed to be removed for this. the hardest part about this job is dealing with the fuel clips it's always best to see if you can get them first before removing the tank. that last thing you want is to drop the tank and be in a situation. once the tank is dropped you can remove the fuel pump if needed
Thanks Jerry.
You are a talented guy being able to undertake this job by your while shooting a video.
Each time I watch another video of yours I appreciate your skills more. Stay well
Great video with lots of important information. I enjoy the content you create. I will be referencing this video when I drop my tank this week.
Keep the great content coming !!
Another reason I love my YJ there Jerry. No evap system lol
Nice jeep i love the yj its like beautiful amalgamation of the xj and tj
Haha, great timing on the video, Jerry. I was the dude asking about the fuel pump collar on Twitter yesterday. Love the jeep vids brother
How did the job turn out in the end? Did you get it all back together
@@TestDontguess went well after the whole collar ring fiasco. It started as a rokman gas tank skid swap but I snagged the fuel outlet on the gas strap and broke the medal outlet that goes from the pump to the hose off... that then turned into a 200 dollar fuel pump change as well lol. But it turned out good in the end.
I'm like you Jerry , I just broke the clips . There to hard to try and save and for a couple bucks easier to just replace. Good job my friend . Say hi to Tomcat for me .
I always keep a army of clips on hand lol
Hello I got a 2001 Tj sport that sat 3 yrs. Less than half a tank of old fuel. If fuel pump doesn’t work n I have to drop tank to empty the fuel do u think I should replace the tank if I have to replace the fuel pump? Or just drop tank, empty it n replace fuel pump?
I got it for free. 165,000 miles. Needs some chassis work but nothing extreme. Plan on doin a complete tune up plus all hard brake lines r shot so no brakes right now. Thx
awesome referencing new clips! I swapped out my tank skid for the Savvy aluminum skid. It gave me about an inch more of clearance from the ground and more space for my trackbar as with my lift and pinion angle it slightly rubbed the factory skid..
interesting i've never had that issue
@@TestDontguess My JKS control arms are a little longer than stock, pushing the rear diff back another 1/2 inch. Then, with my flat underbelly skidplate, the xfer case is much higher, requiring a SYE and elevated pinion angle. That change in pinion angle rotates the diff with the pivot point being where the lower control arms connected making the trackbar rub. All is solved now though! Glad I dont have your salt=rust issues down here in North Carolina!
Damn I'm glad I live in the south. We don't have to lift things down we usually just lower them and we don't have to pull things ote.
On my Mini, the joint around the filter is dead :( I have to change all the Fuel Tank !
need to know how to drop gas tank on a Jeep patriot 2008. someone with no sense put sugar in my gas tank
Great Video!! I have done this job twice (once on my Jeep and once on a friend's Jeep). Like you I just said F##K it and busted the clips off. Keep the videos coming.
It's just better to break things and replace them with stronger things.
You video is fantastic quality!!
Thanks for the vid. I have to drop the tank in my 90 YJ in the future and I know it's going to be a shit show.
oh yeah for sure or take the easy way out and cut a hole in the trunk floor lol
Really annoyed right now 😠...I dropped my tank...broke 3 of those stupid fuel line retainer clips...ordered 4 from rock auto based on the number you show in the video (living in Australia, I don't have the option of just running to a parts store for jeep parts), and the damn things are not the right ones...maybe they changed them from year to year? Dunno, but there's $50 and 2 weeks waiting on the delivery down the tubes...
Not your fault, just venting 😠
Fastenal sells great stainless steel bolts and nuts. Might be worth it, they're expensive, but hopefully won't rust. Sometimes if odd size they won't have in stock, usually longest wait is about 5 days.
S/s hardware will corrode the dissimilar metal around it rather quickly, not a good idea.
Shit. I need to replace the gas tank carrier/skid plate on my '01 TJ. Not looking forward to it.
What's the 2 red things under the hood?
is the 5/8 clip for the one on the evap canister?
Same question not clear - for what is the 5/8 clip?
i feel so much better that you used a ratchet wrench . lol!
Sometimes I like to pretend I’m a union worker and use a non-ratcheting wrench
RUclips certified mechanics.lol...
Really makes you think automotive engineers all have three arms and they are pencil thin with an extra joint huh?
They never think of service in mind
Another important thing is, don't have your buddy help you while he's smoking a joint!