[E-1] Getting Started with ESP32 using Arduino IDE | Solution of Timed out waiting for packet header
HTML-код
- Опубликовано: 2 ноя 2018
- JLCPCB Prototype for $2(Any Color): jlcpcb.com
Stencil price is $6 .
4layer PCB price drop by 17%
6layer PCB price drop by 27%
_________________________________________________________________
Get the same ESP32 board which I'll be using for the series at just Rs. 500 from amazon
amzn.to/2EKl3Eg
_________________________________________________________________
Important Links
GitHub page for boards manager :- goo.gl/D9wHNT
CP2102 Driver :- goo.gl/5AWwvC
Python 2.7 :- goo.gl/oN6kv5
_________________________________________________________________
In this video, I'm talking about how to get started with ESP32 board both on your iOS and Windows system.
I have shown how to install boards package in Arduino IDE, I have also shown which driver is required for using ESP32 DevKit V1 board and I have also shown the solution of Timed out Error which occurs at the tine of programming ESP32.
In the end I have successfully uploaded one blink led sketch on my ESP32 board.
_________________________________________________________________
Other Episodes of this series
Introduction to ESP32 Series | ESP Examples Explained :- • Introduction to ESP32 ...
[Episode 1]Getting Started with ESP32 using Arduino IDE | Solution of Timed out waiting for packet header :- • [E-1] Getting Started ...
[E-2]Internal Temperature Sensor in ESP32 | PWM output in ESP32 | extern C | ESP32 Series :- • [E-2]Internal Temperat...
[E-3]ESP8266 codes on ESP32 | HTTP Client | WiFi Multi | IoT Button | Data Monitoring | ESP32 Series :- • [E-3]ESP8266 codes on ...
[E-4]Home Automation using Webserver on ESP32 | Sending HTML Page | DNS | mDNS | ESP32 Series :- • [E-4]Home Automation u...
_________________________________________________________________
if you love watching my videos and interested in learning new new projects, then donate me so that I can do it forever and better then before.
www.paypal.me/t...
UPI I'd :- sachinsms1990@okaxis
_________________________________________________________________
Facebook :- / techiesms
Twitter :- / imtechiesms
Instagram :- / techiesms
Website :- www.techiesms.com
WhatsApp number :- +91 82000 79034
_________________________________________________________________
#techiesms
explore | learn | share 
Наука
![[E-2]Internal Temperature Sensor in ESP32 | PWM output in ESP32 | extern C | ESP32 Series](http://i.ytimg.com/vi/pFZX_qdr4dY/mqdefault.jpg)
![[E-2]Internal Temperature Sensor in ESP32 | PWM output in ESP32 | extern C | ESP32 Series](/img/tr.png)
The best tutorial ever on RUclips as you are the only who showed to press the boot button
Pls help me out
@@Vicky-lo8bc what is the problem ?
When I connect the esp2866 board to laptop. The laptop shows notting connected
When it connect Esp2866 to laptop and try to program .the software tells no board connected
Searched my parts drawer and found the exact ESP 32 board you have, (DO-IT-ESP32 DEV KIT V1)connected it, amd voila, no more error messages. Your two little tricks were also invaluable. Glad I subscribed. You are the greatest. Do more videos with the ESP32, like where to find data sheets for other brands of esp32s, wifi, BLE, etc. Thanks for being so clear and thorough.
Your "press boot button" is the best thing for me and relief me from many-dayed headache. Thanks bro.
I got the MELIFE 2 Pack ESP32 ESP-32S Development Board from amazon. This info worked with my board too. I selected the ESP32 Dev Module board. It is blinking like it has nothing better to do. Good job! Thanks!
omg thank god you speak english, finally english title with english speaker
I have investigating for this error and only you explained very well, thank you!!, please still posing videos, you are wizard!!, I expended ours with out good results.
This is the most comprehensive and to the point video. I was also facing the same problem but after watching this video i am good to move on. Thanks a load brother.
i have a nodemcu and i am trying with the flash button being pressed but still getting the error "esptool.FatalError: Failed to connect to ESP8266: Timed out waiting for packet header" ..Any solution??
hi
Thank you for your helpful videos
i have this error when i wanna upload code to esp32 :
exec: "cmd": executable file not found in %PATH%
Compilation error for DOIT ESP32 DEVKIT V1 board
i need help Thank you
Sir my esp2866 is not showing in laptop but led blinks when connected
.The esp board is not showing itself in laptop
Buy new Mac? Cool, Nice tutorial because you are concentrate on the error section also
Thank you Sir... You are the saviour... Mahakal bless you sir.... Keep making more videos for us Sir...
can you please solve my problem my problem is that i am using mac and whenever i try to verify simplest code link blink and when i click on verify button it shows error that python lib not loaded even i have downloaded the latest version of python
please help me
Hello Bro,I am working on a project on ESP 32 ... Need your Guidence.will you help me?
Arduino: 1.8.10 (Windows 7), Board: "DOIT ESP32 DEVKIT V1, 80MHz, 115200, None"
Sketch uses 207705 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 15228 bytes (4%) of dynamic memory, leaving 312452 bytes for local variables. Maximum is 327680 bytes.
esptool.py v2.6
Serial port COM3
Connecting........_____....._____....._____....._____....._____....._____....._____
A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header
A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
CP210X Driver is not working in my system , Windows 11 - Can you Pls Helpout
Thanks mate, you saved me. 3 days i had this problem
I'm getting error as
'An Error Occurred While Uploading Sketch'
How to resolve it..?
not showing port also after downloading the driver
Its Mac OS not iOS. But you explained it very well.
Leaving...
Hard resetting via RTS pin...
This error is persistent and I haven't found it's solution. Need your assistance here; please?
Thankyou
I also getting this error
Solo deben presionarlo un momento cuando dice conectando. ¡Thank you bro!
Very very usefull video brother 💖
I performed aal of these steps and can run several example programs in addition to Blink, however when running several other more complicated example programs I get an error saying trouble compiling to ESP32 Dev Board, or trouble compiling to DO-ESP32 Dev Kit V1 Board when other examples had no problem running using these board names. Do you know what causes this error or can you point me to a source that will describe what causes this error?
I have an issue with your tutorial. I am trying to add URL on Arduino after clicking on Preferences but the additional Boards are not showing nor it allows me to add copied line. Please help me to what is I am doing wrong
Error occurred while uploading code "text section exceeds available space in board"
How to get rid of this
Do we need to install the drivers if we are using arduino insted of usb
For windows 10??
Thank you this is the best ESP32 Demo on the internet Stay Safe
Thanks Bro!!! The video was very helpful and you followed all the steps for amateurs like me!
is mandatory to press reset button after upload code???
I have followed all of your steps still facing time out waiting for packet header problem , what should I do then?
What library do you recommend for WiFi manager with ESP32?
Instead of CP2102 driver
it is written on the back of my NodeMCU
1) Install CH340G driver.
2) Use 9600bps baud rate.
3) Connect to WiFi
What should I do? Anyone plz help?!!!
No comm port created after installation of cp2102 driver in Windows10.
It is showing "This device cannot start. (Code 10)".
Need help.
i am unable to download Python 2.7 ver from link which is presented here... plz help anyone
Sir in pin description as per given in website there are total 36 pins, and the module that is suggested by you contains 38 pins how to know the information of rest 2 pins. I'm using same module but it has only 30 pins. Sir does number of pin matters and how I get correct information about my pin
i love you man, its the best tutoriaL. THANKS YOU
great, helped me! it was the boot button... a bit annoying, is there a way to upload code without that button?
The WiFi LED of my Doit ESP Devkit V1 is not turning off and i cannot connect even after using the correct driver
Are u able to upload the code?
Awesome demo on the ESP32, I am getting ESPTOOL error and dont know what to do.
Are you able t to guide on this please ?
My board has ch9102x I can't find proper drivers can anyone help
Thank you so much ! From Argentina Shanti🙏🏼!
Amazing video brother.
Thank you for basic video..
Waiting for next video
did the exact same thing still getting the same error
There is a problem with my NodeMCU ESP8266 CP2102 board.....
esptool.fatalerror: Failed to connect esp8266: Timed out waiting for packet header.
This error occurred in Arduino IDE software
Plz help me find solution for this error...
Thankz in advance!!!!
Watch out my video on this ruclips.net/video/drZQStOjpgI/видео.html
bro esp32 is not instelling in arduino id....what can i do ,,,,plz tell me..
Bro please tell me can I use arduino nano for home automation project with esp32??
Esp32 me mobail se code dalte he to lasta me error aati he pleayss help mee
I press the boot button and stay and nothing change.
Why nobody explain how to install the cp210 driver?
Hello ! You save my life man. Thank you.
Python 2.7?! Why do you need to install that?
Bro i made deauther and its not opening 192.168.4.1 showing time out please bro help me
Thank you bhai this video helped me alot 😊
Mine is a Wemos/lolin D1 mini. It was working fine for a few days and then suddenly, no idea why but perhaps after installing a library, I ran into this error. This board only has a reset button and press/hold combo's don't work. I do have some spare boards, but I'll brick these too rather soon as long as I still don't understand the cause and solution.
same here but no reply
Shall we install (for Windows 7) Python 2.7 or Python 3.6.6 is ok as well ?
Sir I am using this board for a month and I haven't downloaded python 2.7 in my windows and it is still working fine
You must have installed python 2.7 for any other software or may be it was installed unknowingly along with any other software
Otherwise it won’t work at all
@@techiesms sir I checked that but there is no python in my pc
Hi friend , I ordered esp32 devkit v3 , I did all steps you have done , but still the message error :
Esptools.py v2.6-betal
Serial port COM4
Connecting .......-------........-------....... ...
A fetal error occurred : failed to connect to ESP32 : time out waiting for packet header
I pressed the button Boot , but useless
Need help please.
Bro I have esp32 wroom 32 d ,how to add it into aurduino
hi, i'm always enjoy your video , do joe also have video of " platformio "
I used this method perfectly and was able to run many programs and projects. Thanks you. However, recently I tried to connect a board to a TFT SPI ILI9341 color display and the video showed connecting pin 17 to MISO. The DO-IT_ESP32-Dev Kit does not have a pin 17. I looked in my supply drawer and found a Geekworm Easy Kit ESP32 that is slightly longer than the Do-IT (20 pins vs 15 pins). I found it used a CH431 driver instead of the CP2102 Driver. I found the 341 driver on the internet, downloaded it, and installed it. Now my device manager shows two available com ports for the 2102 and two more for the 341. Great. But the IDE still greys out the port not allowing me to connect the new ESP module. Do you know how to make the IDE recognize the loaded drivers? You have been really helpful and I enjoy your approach. Long time sub, appreciate your clear comprehensive approach.
Issue resolved. Problem was USB to Micro cable was missing the two data wires which caused the grayout. Change to an older cable with all four wires and the com port was instantly visible again. Found solution on thingsconnected.io forum. This environment is amazingly sharing and a wonder to behold. Thanks to techiesms for being part of the support community.
Tried holding boot button no luck. Any other suggestions?
I'm Facing same problem "A fatal error occurred: Timed out waiting for packet content" with this error message, if you found solution plz suggest me also...!
Thank You...!
This solution worked for me. Thanks for the video
Great video, resolved my issue, thanks.
how to avoid pressing the boot everytime I upload new codes
Thank you so much!! Your videos have helped me a lot.
How the connection are made in esp8266 esp01
As soon as you'll see the message "Connecting........_____.....__" push reset (or boot) button after the first 5 dots, and will see that process starts!
didn't work for me :( please help!
Is this python 2.7 version is necessary ?
Awesome video sir 👍... Keep it up
Hey brother
I have a problem in ESP32 related to reset
Please help me 🙏🙏🙏
i can upload code sucessfully but my node mcu can not respond on the code for example when i upload blink code in it , led cannot blink but code is successfully uploded
Have u tried using external led on any other pin?
How do I reset the esp32?
Thx sir! Press & Hold the boot button...
hi ,
I was not able to see the com port on my Mac , and when I used a windows pc , I found the board but faced a problem with the boot button thing so it did not work and It kept giving me the error time out waiting for packet header. anyone who can help with this? I tried two modules 1. Heltec wifi kit , 2. esp32 dev module
Install the drivers
Sir, Good video for esp 32 board. Please make video for esp 32 with Android.
I subscribed to u just for helping me solve this ! thanks alot :)
Excellent
That Cp2102 drive is for scilab
Cp2102 driver is for esp32 devkit v1 board
Hi. I'm still facing same problem even after pressing and holding boot button at the time of uploading.. Please guide me.
I'm Facing same problem "A fatal error occurred: Timed out waiting for packet content" with this error message, if you found solution plz suggest me also...!
Thank You
How can i boot esp 01 (8266) module.
esptool.FatalError: Failed to connect to ESP8266: Timed out waiting for packet header
This error occur
Informative and Helpful Video
This helped me. thanks for the upload.
still facing the same issue
Sir it is a very knowledgeable video
Hi Friend, I dont see any reset button. I only have EN and BOOT buttons
Use the BOOT button when Arduino says Connecting... :)
@@WayneRiesterer Thanks dude.. its working fine now
In your video about getting started with ESP32 boards with a Arduino blinking sketches, you mention installing Pyrhon 2.7 after installing the CP210 drivers. What was the need for Python 2.7 installation?
Thanking you in advance,
Paul D. Wilkie
pyserial library which is in python
is needed for serial communication
Thanks a lot!
thank you so much sir
Very good solution..
bhai mera ni ho rha hai such kind of this prbl again n again during uploading i pushing bttn...plz rply me bro
and my board is esp32 dev kit v1
Same here
@@ashishkhar4791 I'm Facing same problem "A fatal error occurred: Timed out waiting for packet content" with this error message, if you found solution plz suggest me also...!
Thank You...!
Thank you! It is very usefully
Awesome dude love you:)
Thank you
still same error :(
best
Esp8266 esp01 .where is the boot button?
Gpio 0
How
Still facing same problem.
Thank You so muchhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh!!!!!!!!!!