I took out the rear seats in my 2008 FJ and installed a bed a few months ago, best RV ever! Wanting a way to open the rear window and lock/ unlock the door the door from the bed in the middle of the night, etc your video was invaluable to me. Thanks for putting it together so nicely with all relevant information, could not have done it without you
Just did it. Thank you for the detailed explanation. After gathering the required parts and tools it only took me 20 minutes! Pretty cool mod, way better than the mechanical one I had seen elsewhere when the only thing you could open was the door from the inside.
Very informative video. Thank you. I think I will run the switch wires up to the front dash board console. If I have to open the main rear door to open the window I don’t need the window open.
@@LiL13izzy7 OK, so I did a modified version of your window button. I installed a button on the main console under the head unit. I used this button from Ebay. (PASSENGER EJECT 8B85G Push switch 12V LED green For Toyota FJ Cruiser ) It says "Passenger Eject". This button is not a momentary switch so it has to be modified a bit. Thank you again for the original video on how to do this.
Thanks alot for such an informative DIY, FUN FACT: tap into the Green and Black wires to lock door + unlock the window only with a simple momentary push switch.
I had to strip the door lock wires a little to get the T-Taps to make secure connections, but other than that, everything else worked perfectly. Thanks!
Did the mod this weekend. Nice and easy, thanks for the idea and the instructions. Used a 3/4" drill bit and the switch you linked fit snug and fine. I have a 2011 and it doesn't control the front doors, just the rear. Would be great if it could control the fronts too, but simply having the ability to open the rear glass without a key is extremely beneficial for less than $20 and a little bit of time.
Even more useful than the A Trac Hack. Having to walk with a cane, with my dog on leash to the driveway, the FJ door will sometimes lock itself again, or I will have to hit the unlock button twice on the key remote when the window is tilted open, to get it unlocked. This Hack is my project for this week, thank you! And my GSD thanks you!
great video man. After watching this last week I decided to go ahead and give it a shot today on my FJ 2007. I did it with one variation. I ran the switch up onto the center console.I put the switch next to the mirror controllers on the left side console.Took a couple hours had to run the wires down under the trim and through the boot/wire cover from the door to the main cabin. Having the switch up with all the other switches in the main cabin just seemed to be a little more useful for me. Now I can unlock the window or lock and unlock the back door from the driver's seat. Awesome video man thanks for the idea.
We must be on the same level, I saw this mod last week and was excited about it. Amazon should be delivering my switches today and I can't wait to do this mod myself. I "may" have something really cool for that rear door in addition to this in the near future, when I take it apart I'll see how the structure is designed to see if it will work. Thanks for the video! Oh by the way, the FJ is one of those vehicles you never really stop modifying :-)
We are definitely on the same level, because I think I got that very same thing for the rear door (stay tuned). I just thought it'd be helpful to separate the window mod into its own video since it does require a little bit of explanation. Can't wait to see yours!
I have a 2007 FJ and I didn’t like that it locked all the doors when I opened the window. Pretty annoying. I wired my switch directly to the solenoid so it only opens the window (bypassing the computer logic that detects a long key turn to the right). Note: a beefy diode is required if you go this route and want to retain the original functionality. Otherwise you need to cut the power wire to the solenoid so you don’t backfeed the signal generator.
Awesome job! I have a 2007 in the body shop getting the roof channels resealed (from leaking) under the roof rack! a common problem with FJs unfortunately!! I have several modifications ready to install that will blow you guy's minds in store for my code name (BLUE THUNDER) Fj Cruiser, so stay tuned. I will also be adding this rear window mod Thank's to you brother!! take care & God Bless!!!
Just tired this mod unfortunately it didn’t work for some reasons the switch after hookup didn’t open or close ….. checked the connection seemed good ….. 2010 FJ with a aftermarket remote starter and key fab …. Maybe that’s the reason hmmm
The real question is why Toyota never placed this needed function on their FJ Cruisers. It could not be a cost factor, cause they already placed the wiring and latch, why not just add the switch?!
Thank you for a great tutorial video on this great mod. Maybe it’s just my FJ, but I can’t unlock the rear door from the key in the outside, the lock cylinder only turns in the locking position. I always found it odd that I had to either use the fob or the driver side lock.
@@LiL13izzy7 so far it’s just been that others’ lock cylinders were dirty or rusted shut. I’ve tried WD-40 but no luck. Maybe I’ll give some penetrating oil a try.
@@LiL13izzy7 yea, installed it this summer. All of the complaints about it were that you won't use it enough to make it worth it. I've used it well over 50 times in 3 months. It should've came from the factory like that, just like the 4runners. Just think, if it was a factory option it would cost way more than the $300.
@@zachlittle6122 Did you find a good DIY video on the power window mod? I have seen one, and I would us e it daily, especially to have the windows down to increase airflow while driving. Please share if you do. Thanks to both of you for sharing info :)
@@michaelharper9966 there is a kit that has everything you need. www.chitown4x4.com/fj-power-rear-window-kit.html. the install might seem like a lot, but it isn't bad at all.
But if I have to open the back door to open the window why open the window? I already have access to the trunk. Thank you again for showing how to wire that switch. I completely agree that should have been factory installed.
You don't have to open the back door to open up the window (you can simply turn and hold the key to the right in the trunk's key-hole for a few seconds to unlatch it). This mod would be useful for someone who spends time in the trunk (like sleeping in the back while camping), and would like to crack the window open from the inside, or to exit the vehicle without having to climb out the front seats.
Considering your exit while in the trunk example… I guess someone pops the window open using your switch and then what? Climbs out the window? Reaches impossibly far down for the handle to open the trunk?
@@mrchrishill Nope. The window mod was done in conjunction with an internal door release mod: ruclips.net/video/sSnkhgAPwZ4/видео.html As far as the internal release mod goes, let's just say you want to exit the vehicle, you can open the door from the inside, as opposed to having to climb over the console and exit out one of the front doors, or in your example, open the window and reach an impossible distance to the outside door handle.
Wow, now this is amazing! Question: is there a specific reason it's installed to the far left and not to the right window lift cap doesn't get in the way?
Personal preference. You can literally pick any spot you want. There is some foam underneath the right side of that cap though, so you'd need to remove that foam or drill through it if you decide to place it on the other side.
It mimics the actions of turning the key in either direction. Turning it one way will lock the door (hold to unlock the window). Turning it the other way will unlock the door. The two rocker positions are like the left and right positions on the door key. I demonstrated this at the 9:52 mark of the video, and further explained at the 12:24 mark.
Do anyone knows a type of connectors which are disconnected in this video around time 8:12? I would replace one of them to add anotherone rather there then using these cutting wires connectors. Maybe it could be dismantle with a little care but I'm not sure.
I have a 2014 FJ, i bought it brand new in December 2014, and recently I'm starting to have problems with the rear view camera, when i put it in reverse (it's manual transmission), it simply goes blank and sometimes blue with some stripes, what do you think about it?
I think your rear view camera is going bad. My mom had a bad camera in her Camry, and the screen would go blue like you mentioned. Replacing the camera did the trick.
It is better to put the control switch near the driver because sometimes one of the children wants to ride in the back and to avoid opening the window and causing him to fall
We don't have children riding in the cargo area, so the likelihood of that is slim to none. This is really meant for a convenient spot for someone to open the window if they are camping out in the back of the FJ. There are many other use cases, but for me personally, I don't see the practicality of mounting a switch in the front. Everybody has a different perspective, but the cool thing is you can route the switch to be anywhere you'd like.
This is only for the window. The rear door latch mod can be done concurrently, when you have access to that rear door panel. I made a separate video on it here: ruclips.net/video/sSnkhgAPwZ4/видео.html
Awesome video I have done this but I am having an issue. I have it wired correctly and it will unlock the door only. I held the switch to unlock the window or lock the door. Does anyone had this problem? The VooDoo FJ is a 2007
Chris, mine is 2012, at first I thought it wasn't opening the window but I had forgotten to hold the switch for a few seconds....works as advertised (for me). I hope you solved your issue.
@@LiL13izzy7 Great mod! Thanks for sharing!! I've read through most of the replies. Its a great video, its not to long, etc, etc . Anyway I do have the same issue with the window not unlatching. I do have the correct switch. It worked for a few days and then stopped. I replaced the switch and again it worked for a few days and stopped. Any thought on the cause? Super easy mod except putting the door panel back on while lining up the door release parts. Thanks
I had this problem at first, due to my confusing the ground wire. Make sure it's the black wire which changes color after the plug in and that it goes to the center terminal on the switch
If I were going to all that trouble I would have installed a door latch when it was all apart otherwise I don't see the need to tap into the door lock wire. Great install video otherwise.
I mention this at the 7:35 mark. I didn't need to disconnect the battery simply because I disconnected the wiring harness before working. I would always err on the side of caution if I were you and just disconnect the negative terminal from the battery. It's super quick and easy to do so anyway.
This is awesome and I learned a lot. Thank you very much
Thanks for watching, glad you found it helpful!
I took out the rear seats in my 2008 FJ and installed a bed a few months ago, best RV ever! Wanting a way to open the rear window and lock/ unlock the door the door from the bed in the middle of the night, etc your video was invaluable to me. Thanks for putting it together so nicely with all relevant information, could not have done it without you
Glad you found it helpful!
Very thorough. Appreciate the detail, which removes any doubt about next steps. The video is not too long at all.
Thanks for watching, let me know if you end up doing this and how it works out.
Just did it. Thank you for the detailed explanation. After gathering the required parts and tools it only took me 20 minutes! Pretty cool mod, way better than the mechanical one I had seen elsewhere when the only thing you could open was the door from the inside.
Nice! Glad it was helpful!
Very informative video. Thank you. I think I will run the switch wires up to the front dash board console. If I have to open the main rear door to open the window I don’t need the window open.
You'll still need to walk back there and pull the window up anyway. Whatever works for you!
@@LiL13izzy7 OK, so I did a modified version of your window button. I installed a button on the main console under the head unit. I used this button from Ebay. (PASSENGER EJECT 8B85G Push switch 12V LED green For Toyota FJ Cruiser ) It says "Passenger Eject". This button is not a momentary switch so it has to be modified a bit. Thank you again for the original video on how to do this.
Thanks alot for such an informative DIY, FUN FACT: tap into the Green and Black wires to lock door + unlock the window only with a simple momentary push switch.
I'm glad you found it helpful!
I had to strip the door lock wires a little to get the T-Taps to make secure connections, but other than that, everything else worked perfectly. Thanks!
Glad to hear it worked out for you!
Did the mod this weekend. Nice and easy, thanks for the idea and the instructions. Used a 3/4" drill bit and the switch you linked fit snug and fine. I have a 2011 and it doesn't control the front doors, just the rear. Would be great if it could control the fronts too, but simply having the ability to open the rear glass without a key is extremely beneficial for less than $20 and a little bit of time.
Awesome! Glad to hear your installation went well!
I installed this switch on the left side of the driver seat, works perfect
Great to hear! Thanks for sharing.
Even more useful than the A Trac Hack. Having to walk with a cane, with my dog on leash to the driveway, the FJ door will sometimes lock itself again, or I will have to hit the unlock button twice on the key remote when the window is tilted open, to get it unlocked. This Hack is my project for this week, thank you! And my GSD thanks you!
Great to hear! Let me know how it goes.
super excited for this, I dont camp out the back of mine but this looks really useful for me
great video man. After watching this last week I decided to go ahead and give it a shot today on my FJ 2007. I did it with one variation. I ran the switch up onto the center console.I put the switch next to the mirror controllers on the left side console.Took a couple hours had to run the wires down under the trim and through the boot/wire cover from the door to the main cabin. Having the switch up with all the other switches in the main cabin just seemed to be a little more useful for me. Now I can unlock the window or lock and unlock the back door from the driver's seat. Awesome video man thanks for the idea.
Glad you found it helpful!
Nice one man! I might have to try this one
Nice, let me know how it goes!
Brilliant! Thank you!!
Glad you found it helpful!
We must be on the same level, I saw this mod last week and was excited about it. Amazon should be delivering my switches today and I can't wait to do this mod myself. I "may" have something really cool for that rear door in addition to this in the near future, when I take it apart I'll see how the structure is designed to see if it will work. Thanks for the video! Oh by the way, the FJ is one of those vehicles you never really stop modifying :-)
We are definitely on the same level, because I think I got that very same thing for the rear door (stay tuned). I just thought it'd be helpful to separate the window mod into its own video since it does require a little bit of explanation. Can't wait to see yours!
At 11:00 before you reinstall the panel, add a layer of Kilmat 80mil sound deading material as the door is not at all insulated for sound.
Yeah this is a good point. I've wanted to do this throughout the entire vehicle, but haven't had the time.
You may be my newest hero!!!!
Thanks! I'm just a dude who loves his FJ.
I have a 2007 FJ and I didn’t like that it locked all the doors when I opened the window. Pretty annoying. I wired my switch directly to the solenoid so it only opens the window (bypassing the computer logic that detects a long key turn to the right). Note: a beefy diode is required if you go this route and want to retain the original functionality. Otherwise you need to cut the power wire to the solenoid so you don’t backfeed the signal generator.
Awesome job! I have a 2007 in the body shop getting the roof channels resealed (from leaking) under the roof rack! a common problem with FJs unfortunately!! I have several modifications ready to install that will blow you guy's minds in store for my code name (BLUE THUNDER) Fj Cruiser, so stay tuned. I will also be adding this rear window mod Thank's to you brother!! take care & God Bless!!!
That's great, can't wait to see what you have to share.
My next project!! Your awesome!! And should definitely be stock!
Great, let me know how it goes.
I was just saying this, since it's electronic like the locks it could also be on the key fob
Yeah, programming it on the key fob would have been a nice addition from the factory.
Excellent job very well done 👍🏻
Thanks!
Just tired this mod unfortunately it didn’t work for some reasons the switch after hookup didn’t open or close ….. checked the connection seemed good ….. 2010 FJ with a aftermarket remote starter and key fab …. Maybe that’s the reason hmmm
The real question is why Toyota never placed this needed function on their FJ Cruisers. It could not be a cost factor, cause they already placed the wiring and latch, why not just add the switch?!
Excellent points.
Thank you for a great tutorial video on this great mod. Maybe it’s just my FJ, but I can’t unlock the rear door from the key in the outside, the lock cylinder only turns in the locking position. I always found it odd that I had to either use the fob or the driver side lock.
That's definitely not the norm. I hope you'll be able to figure it out. Have you checked the FJ Cruiser forums for any existing threads about it?
@@LiL13izzy7 so far it’s just been that others’ lock cylinders were dirty or rusted shut. I’ve tried WD-40 but no luck. Maybe I’ll give some penetrating oil a try.
Sweet! ... subscribed. 👍
Awesome! Thank you!
You should check out the power rear window. Much more useful
Have you done it? What are your thoughts?
@@LiL13izzy7 yea, installed it this summer. All of the complaints about it were that you won't use it enough to make it worth it. I've used it well over 50 times in 3 months. It should've came from the factory like that, just like the 4runners. Just think, if it was a factory option it would cost way more than the $300.
@@zachlittle6122 Did you find a good DIY video on the power window mod? I have seen one, and I would us e it daily, especially to have the windows down to increase airflow while driving. Please share if you do. Thanks to both of you for sharing info :)
@@michaelharper9966 there is a kit that has everything you need. www.chitown4x4.com/fj-power-rear-window-kit.html. the install might seem like a lot, but it isn't bad at all.
I wish I had the power rear door windows, the little windows
Wooooow amazing good job 👍🏻
とてもさんこうになりました。
But if I have to open the back door to open the window why open the window? I already have access to the trunk. Thank you again for showing how to wire that switch. I completely agree that should have been factory installed.
You don't have to open the back door to open up the window (you can simply turn and hold the key to the right in the trunk's key-hole for a few seconds to unlatch it).
This mod would be useful for someone who spends time in the trunk (like sleeping in the back while camping), and would like to crack the window open from the inside, or to exit the vehicle without having to climb out the front seats.
Considering your exit while in the trunk example… I guess someone pops the window open using your switch and then what? Climbs out the window? Reaches impossibly far down for the handle to open the trunk?
@@mrchrishill Nope. The window mod was done in conjunction with an internal door release mod: ruclips.net/video/sSnkhgAPwZ4/видео.html
As far as the internal release mod goes, let's just say you want to exit the vehicle, you can open the door from the inside, as opposed to having to climb over the console and exit out one of the front doors, or in your example, open the window and reach an impossible distance to the outside door handle.
wow thank you for shared , do you have the link where to find all those accessories as the switch , t tips etc. thanks
Yes, all the links are listed in the video description area!
Wow, now this is amazing!
Question: is there a specific reason it's installed to the far left and not to the right window lift cap doesn't get in the way?
Personal preference. You can literally pick any spot you want. There is some foam underneath the right side of that cap though, so you'd need to remove that foam or drill through it if you decide to place it on the other side.
@@LiL13izzy7 That makes sense on the location
Thank you so much for the heads up. I am too excited to do this. Keep up the epic videos 🤙🏼
I'm sure if I had drilled that hole just a few millimeters to the left, it would have cleared. Thanks for the kind words as well.
@@LiL13izzy7 Hey, but it definitely still works! Trying to find time to do this mod plus the latch one! Thank you for these videos!
Just wanting to clarify this switch does it unlock the door as well as the window separately pending switch contact?
It mimics the actions of turning the key in either direction. Turning it one way will lock the door (hold to unlock the window). Turning it the other way will unlock the door. The two rocker positions are like the left and right positions on the door key. I demonstrated this at the 9:52 mark of the video, and further explained at the 12:24 mark.
@@LiL13izzy7 thanks for the reply, i did watch it all the way through just wanted clarification before starting the project. Thanks
Do anyone knows a type of connectors which are disconnected in this video around time 8:12? I would replace one of them to add anotherone rather there then using these cutting wires connectors. Maybe it could be dismantle with a little care but I'm not sure.
I have a 2014 FJ, i bought it brand new in December 2014, and recently I'm starting to have problems with the rear view camera, when i put it in reverse (it's manual transmission), it simply goes blank and sometimes blue with some stripes, what do you think about it?
I think your rear view camera is going bad. My mom had a bad camera in her Camry, and the screen would go blue like you mentioned. Replacing the camera did the trick.
It is better to put the control switch near the driver because sometimes one of the children wants to ride in the back and to avoid opening the window and causing him to fall
We don't have children riding in the cargo area, so the likelihood of that is slim to none. This is really meant for a convenient spot for someone to open the window if they are camping out in the back of the FJ. There are many other use cases, but for me personally, I don't see the practicality of mounting a switch in the front. Everybody has a different perspective, but the cool thing is you can route the switch to be anywhere you'd like.
Does this open the door from the inside too, or only the window?
This is only for the window. The rear door latch mod can be done concurrently, when you have access to that rear door panel. I made a separate video on it here: ruclips.net/video/sSnkhgAPwZ4/видео.html
Do you have to open the window first?
The mod is to unlatch the rear window lock. So..this will allow you to open the window from the inside. No need to "open the window first."
Have a question, how to I unjam the back door??
Remove the plastic door cover. I went through this at least 3-4 times when the door release got stuck.
Awesome video I have done this but I am having an issue. I have it wired correctly and it will unlock the door only. I held the switch to unlock the window or lock the door. Does anyone had this problem? The VooDoo FJ is a 2007
Chris, mine is 2012, at first I thought it wasn't opening the window but I had forgotten to hold the switch for a few seconds....works as advertised (for me). I hope you solved your issue.
Did you use the right switch? (On) off (on) momentary switch?
@@LiL13izzy7 Great mod! Thanks for sharing!! I've read through most of the replies. Its a great video, its not to long, etc, etc . Anyway I do have the same issue with the window not unlatching. I do have the correct switch. It worked for a few days and then stopped. I replaced the switch and again it worked for a few days and stopped. Any thought on the cause? Super easy mod except putting the door panel back on while lining up the door release parts. Thanks
I had this problem at first, due to my confusing the ground wire. Make sure it's the black wire which changes color after the plug in and that it goes to the center terminal on the switch
The t taps are for 16 to 14 AWG?
The ones I was using are for 20-18 gauge wires. Obviously, use the ones appropriate for the gauge you're using.
If I were going to all that trouble I would have installed a door latch when it was all apart otherwise I don't see the need to tap into the door lock wire. Great install video otherwise.
Thanks for the comment. I agree, which is why I did exactly that: ruclips.net/video/sSnkhgAPwZ4/видео.html. I split the 2 mods into 2 separate videos.
Do I need to disconnect the battery for this mod?
I mention this at the 7:35 mark. I didn't need to disconnect the battery simply because I disconnected the wiring harness before working. I would always err on the side of caution if I were you and just disconnect the negative terminal from the battery. It's super quick and easy to do so anyway.
@@LiL13izzy7 thank you sir, I will endevour on this two mods this weekend.
You can open it by turning the key in the back door to the right and hold it and it pops open
Yes, that much is clear. This is for opening the window from the inside.
You'll never be done.
Apparently not!
Good mod but painfully loooooooong vid!
Quick T taps are a no go brother 👎🏻👎🏻👎🏻. Quickly remove those from your FJ if you used any before your wiring becomes a corroded, shorted mess :(