I ordered mine within the first minute of it going on sale. It took them almost 2 weeks to actually ship it. Finally got it a few days ago. Luckily the famicom one that I got has zero light bleed. I would have loved to have gotten it sooner but I'm glad that they waited and sent me a good one .
Can we confirm which systems should be 1:1 and which should be 4:3? GB, GBC should be 1:1 and NES, Genesis, SNES should be 8:7? GBA 3:2. Gamecube, Wii, and PS2 force 4:3?
They will make a few more devices that are ALMOST what you want in the hopes that you'll give up, buy those, and then buy the mystical RG406p that they'll release two months after you get your wallet out.
They probably didn't want to get stuck with too many unsold metal shells with how much they added to the cost of the rg405m, so instead they opted for a more distinct change and did the rg405v instead. Realistically, we most likely get a 406p at some point, but it will be a few months as they like to spread out the higher end models with 2-3 XX releases.
Anbernic sent me a 2nd screen and it didn't have a thermal pad on its back. Nor did it have any adhesive around the displays edge so it wouldn't even stay seated in the front enclosure. Not to mention that once I opened it up I saw that they applied the thermal paste to the various chips SO poorly. It's really just a mess. I don't think Anbernic is going to fully resolve this.
I want you to film yourself breaking this! I already have a Cube. Mine has a little light bleed at the top, nothing like the review unit. I love the design. I'd recommend the RGB30 over this for anyone who doesn't have one and wants a 1:1 screen. I wish this could dual boot to linux.
I’ve used the ‘crop’ in PS2 graphics settings to remove a little from the left and right and it gives an even larger display. Works really well in Outrun2006
Please do a video where it shows all the systems in fullscreen strech mode so that we can see how big picture we can get despite being deformated in some cases
I saw somewhere that Duckstation with widescreen patches enabled and stretched to fullscreen would make a nice output for that 1:1 screen. I don't have such a device and I'd love to know if GC or PS2 would be able to work like this.
@@zu_perler3011 - Did you remove my reply to OP? If so, why? It offered information that was very relevant to OP's question but wasn't mentioned in yesterday's video. If not; then RUclips is being weird. Usually when the automod nukes a comment it removes it from my posting history and I don't get notifications of future replies. It's like it was never even made. My reply to OP is still in my posting history and I got a notification of your reply, so, it would appear that someone manually removed it. I'd like to know what rules I violated, if any. Thank you.
@@mattdavis9601 YT is being weird. I saw it earlier and now it's gone. No one here deleted it - we don't delete anything besides obvious spam or bot stuff.
"I wouldn't want to ... give it to someone with that light bleed." I wouldn't complain. The purple one's screen looks A-OK enough to me! Nah, I'm not begging. Well, not too much, anyways. On a serious note; I'd love to see a teardown and repair video. I enjoy that sort of content and I have no doubt that one about fixing the Cube would be up to Zu's usual high standards of infotainment. When I was a kid I used to read my Dad's Chilton Auto Repair manuals for fun. That actually not a lie, btw. When I was 10 I knew how to rebuild a carburetor, but, didn't know how to make friends. I believe that's what they now call being a Sigma, and apparently it's a good thing. See, I was a trendsetter! Whoo hoo! "1995 Honda Civic ... Undercarriage glow lights". The most reliable part of any tuner Honda Civic is the glow lights. Do you know what's the most reliable part of any showroom stock Volkswagen? The Check Engine light. "What did we learn?" Zu likes big butt grips and he cannot lie?
I'm still watching your review, but wanted to chime in that there is actually absolutely nothing wrong with the sticks. The issue is entirely with the software in Anbernic's version of Android causing the sticks to snap to cardinals. You can (and I did) replace the sticks with Gulikit's hall effect sticks for Nintendo Switch, and they will react exactly the same. So anyway, yeah, we need to wait a few months for GammaOS to support the RG Cube so that we can solve this, since Anbernic apparently can't be bothered to give us at least a toggle to correct the sticks.
100% correct, we're using these K silvers in other handhelds and they are excellent (like in the ZPG A1 Unicorn). I wish they could fix their software, it is very frustrating to deal with this issue over and over as they release the same Android rom on each successive device.
I'm so disappointed in anbernic for making the rg40xx h. That could've been the rg406p with 8gb of ram, but instead we got a 35xx h with a 4 inch screen. :/ I like the cube though. Not too bad. Psp isn't an issue for me. I have no issues stretching out the screen. It doesn't bother me too much though it would probably look better on the future 406m or p that anbernic will eventually make further down the line.
I got my day 1 purchase cube yesterday after waiting 3 weeks buying from eBay. Mine didn't have light bleed as bad as your pink one. There's a little bleed on the top but not enough for me to return it.
Hey I bought from ebay too for the big discount, also got it yesterday. We probably were in the same shipment. And yeah same, minimal light bleed on top, not enough of a problem when I weigh it against what I have to go through (either return it and get a refund then buy another one and wait again, or Anbernic sends me a screen and I have to fix it myself).
Just ordered this and selling rg28xx. This design is mad unique we just need a GameCube colored silicon case for it 💯💯 if anybody knows of one lmk please 🏆🏆👊
I want a 5:4 not wide but square with a snapdragon or the equivalent with 16gb and 256 and a 7 or 10,000 battery that would be a good all-around handheld like a bigger cube maybe, that would but so good.
I ordered mine within the first minute of it going on sale. It took them almost 2 weeks to actually ship it. Finally got it a few days ago. Luckily the famicom one that I got has zero light bleed. I would have loved to have gotten it sooner but I'm glad that they waited and sent me a good one .
Glad yours didn’t have any light bleed! What are you playing on it?
THIS GUY IS MAKING SENSE
The Honda Civic in the video store parking lot analogy was dead on
I knew there'd be at least one person nodding and going "get out of my head Zu!"
🍾
Thanks a bunch! There are a few things I was having trouble with, and this answers most of my questions! 💚
Can we confirm which systems should be 1:1 and which should be 4:3? GB, GBC should be 1:1 and NES, Genesis, SNES should be 8:7? GBA 3:2. Gamecube, Wii, and PS2 force 4:3?
PICO 8 is also 1:1. Amiga is also pretty close to 1:1 (640 x 512 / 320 x 256 I believe, so 1.25:1)
We never got a RG405p, why not just give us a 4:3 RG406p? Dave Bautista Voice: “Just give me what I want!”
They will make a few more devices that are ALMOST what you want in the hopes that you'll give up, buy those, and then buy the mystical RG406p that they'll release two months after you get your wallet out.
Wish they had done it in the shell of the upcoming 40xxH. Although this looks interesting to me mostly for the use case of 3DS.
They probably didn't want to get stuck with too many unsold metal shells with how much they added to the cost of the rg405m, so instead they opted for a more distinct change and did the rg405v instead. Realistically, we most likely get a 406p at some point, but it will be a few months as they like to spread out the higher end models with 2-3 XX releases.
You have no idea how depressed I got when you reminded me of the 90s Pizza Hut dining experience. Great times, but man, getting old sucks.
We're the parents now! How did that happen?
@@retrohandhelds Nooooo! We are not parents. You take that back!
Anbernic sent me a 2nd screen and it didn't have a thermal pad on its back. Nor did it have any adhesive around the displays edge so it wouldn't even stay seated in the front enclosure. Not to mention that once I opened it up I saw that they applied the thermal paste to the various chips SO poorly. It's really just a mess. I don't think Anbernic is going to fully resolve this.
Nah, RBG looks awesome on this 🍻
Repair video would be so cool!!!!
Great review zu! Very in depth. Much appreciated
I want one just to finally get my 3ds library on it. Can’t get them to run smooth on my Odin.
I want you to film yourself breaking this!
I already have a Cube. Mine has a little light bleed at the top, nothing like the review unit. I love the design. I'd recommend the RGB30 over this for anyone who doesn't have one and wants a 1:1 screen. I wish this could dual boot to linux.
Perfect 👌 timing got mine yesterday. I just gotta find the time to open it 😅
4:35 CHIBI ROBO THE GOAT!!
I got the famicom one. It goes really good when you make the LEDs orange I got PSP to full screen works fine not sure what all the hubbub's about
Love the review and it convinces me between rg405m and the rg cube.
I’ve used the ‘crop’ in PS2 graphics settings to remove a little from the left and right and it gives an even larger display. Works really well in Outrun2006
Oh fantastic! Thanks, I'll have to try that.
Great review as always ZU! I want a video about your favorite retro games! Also which handheld you prefer to play your favorites on!
Thanks for the idea!
Saw someone use widescreen hack to fill the screen on gamecube, looked awesome
Please do a video where it shows all the systems in fullscreen strech mode so that we can see how big picture we can get despite being deformated in some cases
I just got my cube how do I turn off onscreen controls for ps2 ?
I saw somewhere that Duckstation with widescreen patches enabled and stretched to fullscreen would make a nice output for that 1:1 screen. I don't have such a device and I'd love to know if GC or PS2 would be able to work like this.
I saw it on Reddit a few days ago that Dolphin MMJR (GameCube) was recently updated to allow for the same thing.
15:15 I cover it for GC.
@@zu_perler3011I somehow missed this. Thanks a lot 😁
@@zu_perler3011 - Did you remove my reply to OP? If so, why? It offered information that was very relevant to OP's question but wasn't mentioned in yesterday's video.
If not; then RUclips is being weird. Usually when the automod nukes a comment it removes it from my posting history and I don't get notifications of future replies. It's like it was never even made. My reply to OP is still in my posting history and I got a notification of your reply, so, it would appear that someone manually removed it. I'd like to know what rules I violated, if any. Thank you.
@@mattdavis9601 YT is being weird. I saw it earlier and now it's gone. No one here deleted it - we don't delete anything besides obvious spam or bot stuff.
"I wouldn't want to ... give it to someone with that light bleed."
I wouldn't complain. The purple one's screen looks A-OK enough to me! Nah, I'm not begging. Well, not too much, anyways. On a serious note; I'd love to see a teardown and repair video. I enjoy that sort of content and I have no doubt that one about fixing the Cube would be up to Zu's usual high standards of infotainment.
When I was a kid I used to read my Dad's Chilton Auto Repair manuals for fun. That actually not a lie, btw. When I was 10 I knew how to rebuild a carburetor, but, didn't know how to make friends. I believe that's what they now call being a Sigma, and apparently it's a good thing. See, I was a trendsetter! Whoo hoo!
"1995 Honda Civic ... Undercarriage glow lights".
The most reliable part of any tuner Honda Civic is the glow lights. Do you know what's the most reliable part of any showroom stock Volkswagen?
The Check Engine light.
"What did we learn?"
Zu likes big butt grips and he cannot lie?
I'm still watching your review, but wanted to chime in that there is actually absolutely nothing wrong with the sticks. The issue is entirely with the software in Anbernic's version of Android causing the sticks to snap to cardinals. You can (and I did) replace the sticks with Gulikit's hall effect sticks for Nintendo Switch, and they will react exactly the same.
So anyway, yeah, we need to wait a few months for GammaOS to support the RG Cube so that we can solve this, since Anbernic apparently can't be bothered to give us at least a toggle to correct the sticks.
100% correct, we're using these K silvers in other handhelds and they are excellent (like in the ZPG A1 Unicorn). I wish they could fix their software, it is very frustrating to deal with this issue over and over as they release the same Android rom on each successive device.
I say break it and show us the process of fixing the screen on the pink one haha
I'm so disappointed in anbernic for making the rg40xx h. That could've been the rg406p with 8gb of ram, but instead we got a 35xx h with a 4 inch screen. :/
I like the cube though. Not too bad. Psp isn't an issue for me. I have no issues stretching out the screen. It doesn't bother me too much though it would probably look better on the future 406m or p that anbernic will eventually make further down the line.
I would love a GC/PS2/Wii showcase! 🍻💪🏼🔥
A shame its android instead of linux. Could have been a great rgb30 replacement if it had native pico 8 support.
Can you force N64 for to be 8:7 ?
I got my day 1 purchase cube yesterday after waiting 3 weeks buying from eBay. Mine didn't have light bleed as bad as your pink one. There's a little bleed on the top but not enough for me to return it.
Hey I bought from ebay too for the big discount, also got it yesterday. We probably were in the same shipment. And yeah same, minimal light bleed on top, not enough of a problem when I weigh it against what I have to go through (either return it and get a refund then buy another one and wait again, or Anbernic sends me a screen and I have to fix it myself).
Don't do it Zu don't do it!😢
I did not like the color options originally. But that purple/pink is slowly growing on me
Just ordered this and selling rg28xx. This design is mad unique we just need a GameCube colored silicon case for it 💯💯 if anybody knows of one lmk please 🏆🏆👊
I want a 5:4 not wide but square with a snapdragon or the equivalent with 16gb and 256 and a 7 or 10,000 battery that would be a good all-around handheld like a bigger cube maybe, that would but so good.
How do you get to the RGB and fan settings?
it's in the pull down android menu.
I just got mine in the mail. I wish the sticks weren't so bad...
My boy had a 95 civic aka rice rocket
Of course it got stolen early 96
….Got my Cube yesterday no bleed
Anbernic and Powkiddy are the same company. it's like Chevy Vs Cadillac. Anbernic obviously being the Cadillac of the two.
whoa, I'm beloved now? ❤
Number one in our hearts
I'll buy the purple just for the white buttons 😂
oh wow that light bleed?
If they were to just add a 556 screen on top and optimize android for dual screen this would legit be the best android emulation device on the market
Id like to buy your review unit lol
You mentioned an arcade game of the week at one point. . . What channel is this?
In our Discord there's a game of the week channel. They're all sub-2 hour games, so arcade games tend to appear often.
This thing is so cute.
Edit: Oh good gravy that's not so cute anymore...
Damnit Zu, why are you tempting us? 😭😭😭
I AM THE DEVIL
@@retrohandhelds sorry I have not relinquished that position yet. 😏😁😛
Stretch that PSP!
Review a Honda Civic
Specifically for how bad of a gaming device it is
You should have named this a review not setup video
Drama for your Mama!!!
Gameboy 2.0
Release the Gary review you cowards!!
Here's the Gary review. He's unreliable on weekdays and has a mild onion smell when he sweats. 6/10
32 mins. ugh
Pls play ps2 games , this is a perfect size to carry it on pocket , jacket and sling and play on the go.. Go deep with the ps2 boss