I recently put these in my 2011 fltrx. If you have a 09 or newer you don't have to remove the fairing. Just remove the 4 screws holding the headlights same screws and plug n play.
Great video do you still have these in the bike the road glides are more tricky to swap than the electras. i was going to get these for my uncle for chrismas
Hi Dan. Great video, great explanations. Thanks for a great job, well done. Allow me to ask you one small favour: about the back space difference from the stock headlights to the new LEDs. In your video, after install the new LEDs, there's more back space than before. Am i right or is it just video "effect"? Once again, thank you.
@@Gasolinegarage HI Dan. Thanks but I already knew that. I referred to the inside part, the space between the rear of the led housing and the wires from inside the fairing, when you hang the fairing to the frame hooks. Is there some more space when compared with the stock headlights? For me, it seems that the led housing is thinner than the stock halogen one. Is it?
@@antmrod5198 oh got u .. No it lines up with a bracket that you bolt on so it takes up the spacing at least with this headlight that’s what they came with it came with the steel bracket with the two notches in it so it hooks into the hooks
![ARGENTINA vs. BOLIVIA [6-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 10](http://i.ytimg.com/vi/C3wPtKNbAOA/mqdefault.jpg)
I recently put these in my 2011 fltrx. If you have a 09 or newer you don't have to remove the fairing. Just remove the 4 screws holding the headlights same screws and plug n play.
MM77 Approved 👍🏼👍🏼…………………………….Thanks, I needed this, my aftermarket headlight came with NO instructions!!
Can you please send me the information for the turn signals, I already have the headlights and love the turn signals thanks.
Your video really helped me out. Thank you, brother!
Happy New Year Dan. Hope the new year will bring better things for all.
👍😃
Happy new year !
Nice work Bro ... Happy New Year
Thanks man ! Happy new year!
are these still in your bike? still like them?
Hello great vid could u tell me how to adjust down please
What brand of lights did you use for the front turn signals
Look like the Hogworkz. I got them on my road glide. Love em
Great video do you still have these in the bike the road glides are more tricky to swap than the electras. i was going to get these for my uncle for chrismas
There not to hard But getting the faring lined up again is a pain in the ass
@@Gasolinegarage ok cool thanks for the reply
@@mikehawk4665 no problem
Hi Dan. Great video, great explanations. Thanks for a great job, well done.
Allow me to ask you one small favour: about the back space difference from the stock headlights to the new LEDs.
In your video, after install the new LEDs, there's more back space than before. Am i right or is it just video "effect"?
Once again, thank you.
The headlight housing sits exactly where the original one did and there’s a black headlight bezel trim that goes on the front of the faring
@@Gasolinegarage HI Dan. Thanks but I already knew that. I referred to the inside part, the space between the rear of the led housing and the wires from inside the fairing, when you hang the fairing to the frame hooks. Is there some more space when compared with the stock headlights? For me, it seems that the led housing is thinner than the stock halogen one. Is it?
@@antmrod5198 oh got u .. No it lines up with a bracket that you bolt on so it takes up the spacing at least with this headlight that’s what they came with it came with the steel bracket with the two notches in it so it hooks into the hooks
Happy New Year!!!
Happy new year !
What signal lights
?