Lectric Lighting Sharktooth LED Headlight Install :Weekend Wrenching
HTML-код
- Опубликовано: 27 май 2020
- Shop Now - www.jpcycles.com/product/540-...
Letric Lighting's Sharktooth LED headlamp is like no other. This headlight is sure to stand out of the crowd by being the brightest and coolest looking headlight. Integrated Switchback turn signals adorn the headlight on both sides and the best part is, it is plug and play. No striping wires and soldering.
• Black/Chrome LED
• Black aluminum housing
• SWITCHBACK integrated turn signals function as White running lights then switch to (bright) Amber turn signals to off when turn signal switch is activated
• Turn signals are CAN/Bus compliant and operate along with factory turn signals
• 100% plug-n-play
• Easy to install
• Low beam 3911-lumens
• High beam 7999-lumens
• Amber turn signal 221-lumens
• 6000K Color Temp
• DOT, SAE & E-Mark compliant
#RoadGlide #LED #Lighting 
Авто/Мото
Interested in more "how to's" and Road Glide content? Head on over to Countersteer www.jpcycles.com/countersteer?Lectric_Lighting_Sharktooth_LED_Headlight_Install_:Weekend_Wrenching&ETayZWCE
i dont mean to be off topic but does anybody know of a tool to get back into an Instagram account..?
I was dumb forgot my login password. I would appreciate any assistance you can offer me!
@Reid Tommy Instablaster =)
@Vivaan Bo thanks for your reply. I found the site thru google and Im trying it out now.
Looks like it's gonna take quite some time so I will get back to you later when my account password hopefully is recovered.
@Vivaan Bo it worked and I actually got access to my account again. I'm so happy!
Thank you so much, you saved my account :D
@Reid Tommy Happy to help :)
I have this headlight on my 2019 Road Glide Ultra. I cannot even describe how much better this headlight is than stock. Much more illumination on sides, and the high beam is unbelievably bright and has much greater distance. If you ride at night at all, this is the best upgrade you can possibly make. This is the headlight that should have been stock on the FLTR. For a few that asked, the stock turn signals still work, you have just ‘added’ the two built into the headlight.
can you get away with not using lock tight on bolts?
That's why i installed custom dynamic tri beam headlight on my 21 road glide theh excellent.
I had this light installed on my bike.... When I go to auxiliary the light stays on, Even my back running like stays on in auxiliary mode... Please tell me how to fix this😎👊🏽👊🏽
Would’ve been good to see a before and after comparison.
is there anyway to get that turn signal wiring harness?
How do you adjust the height of the spotlight?
I just bought an Eagle Lighting headlight for my Road Glide. Looks exactly like Lectric. Was it intentional that both brands look alike?
i dont get why this one is $800 but the advanblack is $575 for the same headlight it looks like?
Question... on my '21 RG I have a screen w/turn signal (custom d) would this light still work??
Thx
Nice video. Thanks.
(Some of these comments are ridiculous 🙄)
Is there a splitter on the wire for the turn signal if you are already running aftermarket fairing mounted turn signals.
I just picked this up second hand and low and behold, no turn signal splitter… does J&P sell a splitter? I couldn’t find one. Thank you.
Any way to adjust the beam up and down like the stock unit? Say if rear suspension has been changed and headlight angle is different than stock?
That's a lot of hardware, are they plug a play? pity there was no before and after on the light performance, enjoyed the vlog.
Where do I Purchase the wire harness for my signal to my headlamp that’s in this video
I have an 18 RGS and the big problem I have with the stock headlight is when the high beams are on the actual low beams lights shut and you loose all that light directly in front of the bike. With the high beams on I literally cannot see any part of the road or ditch for at least 100 ft directly in front of my bike... I feel very unsafe to ride like this. I did get the headlight alignment checked to make sure it is aimed properly.
This is an extremely bad design on Harley's part. I've never owned a vehicle where you loose all sight of the road directly in front of the vehicle when the high beams are on... this is especially unsafe on a motorcycle.
So my question is... how does this light behave when the high beams are on? I want a headlight that when you have the high beams on you get the same great visibility of the lows directly in front of the bike along with the higher long distance light down the road of the high beams.
Looking at the ground in directly in front of you will make for an F..... up night. Never had an issue with the high beams on my FLTRXS.
Installation on this light is possible to put Hi/low adapter?
You didn’t show how you hooked up the turn signals already on the fairing. Do they still work
We do show that. They stock signals still work because of the splitter that was installed ruclips.net/video/46hETayZWCE/видео.html
I have this light, it's awesome. Great video.
Taurian321 any chance you can share a video of it at night. I’m in the U.K. so would love to see the performance before ordering one.
Cheers
How about turn light? Is it still working?
What is the difference between my day maker head light and this one?
This one allows you to look like the challenger 😉
This light has a higher lumen rating and has built in turn signals.
A before and after light output would have topped it off. Srry
There’s wayyy too much stuff holding in the light 🙄
Don't talk so fast, I can't even hear your name !!!!
Cheap junk from China these lights are 160 a piece on alibaba