Everyone talks about his superior angles skills and im here adoring that he doesnt waste vinyl planks and cuts scraps untill they dont fit anywhere. Thats some extra material managin skill
My man must’ve aced geometry! He’s a master of angles. Watched that entire video in awe of how he made every piece fit like a puzzle. Very satisfying to watch knowing I’ll never lay a floor down like this…
@@JohnDoe-vm1rr it's still consider big deal dude you know it yourself and that work still need bit of effort if you didn't have any experience or you have you don't have to be overestimate your experience or look down on others work , because they gained it and work hard for it.
If this whole flooring gig doesn't work out for him, he could be a geometry professor. This is a master class on angles and craftsmanship! 10 out of 10. The best there I've seen. Mad skillZ!
I agree...100%Master of side cuts. We hired a so called tile layer for our house. We had to fire him & he left with our$. Tiles on the floor toes busted, edges look a mess in one bedroom & kitchen.
😂😂😂 When I read your comment, I nearly fell out of my chair laughing. I think maybe this video had me mesmerized. Pretty sure I didn’t know I was here. Really sure I don’t know how I got here. Thanks. A good belly laugh is needed occasionally. 😂😂😂
Сижу завороженная, смотрю как другие "быстро делают ремонт". Можно мастера выписать? А то мой ремонт меня уже достал 😂, а он один наверное всё сделает... Мастеру респект! 👍👍👍🔥
The critical part is getting your center and guide lines laid out before adhesive goes down. You can see his pencil lines at the start. Pause the video right when he lays the first strip down. You can see the center line and crossing angle for the first strips. Once those are correctly placed, he's off to the races. Without a proper layout, the job would be crooked and look terrible. Meticulous preparation is key and he did it. Excellent work.
Don’t forget the surface prep. A dusty or uneven surface would ruin the job. At least half the work/ time of this project is not laying the pieces. It’s scrubbing the surface, leveling compounds and meticulous vacuum and sponging down surface. All this was done perfectly. Shame they didn’t show it here. (Maybe it was another team or contractor)
While he does exceptional work, the cutting of angles are much easier than most think. The utilization of every piece of material is the impressive part to me and I have been doing commercial glue down for 20+ years! I would hire this guy on the spot!
Супер мастер,и матерьял использован экономно,все уголки так точно отрезаны,простой человек без опыта и навыков голову сломает как это сделать и без ленейки,спасибо за это видео.Просто восхищенье от такой работы.Браво мастеру.
@@user-gw5bo4qz1e ламинат гибкий. есть самоклеющийся. классная штука, такой думаю постелить, может поверх старого даже может попробовать.... мастер просто колдунство делает!
@@user-gw5bo4qz1e "PVC", то как делает этот "перец", повторять не рекомендую! Не подготовленная поверхность (следы старого клея, шпаклёвка непойми чем белым без шлифовки) эти "касяки" через неделю будут видны, а при окнах в пол.... видок будет как на разбитой дороге. Пересохший клей (время первичной реакции при комнатной температуре от 10 до 15 минут, дальше можно не класть, всё равно переделывать). Значит мыть пол нельзя("зазвенит" или просто отвалится)только протирать, аккуратно. Про вальцовку готовых зон просто забыли(значит "гребёнку" тоже будет видно, красота). Ну, по подрезке всё норм(кроме газовой горелки, вроде свет в помещении есть?), занимаясь укладкой подобных вещей, на подрезке перестаёшь заморачиватся уже на второй неделе.
@@wasiks2011 Ламинат это прессованый картон. Это "PVC", могут обозвать "винилом"( в Германии так) но это одно и тоже по сути. Самоклеящийся... это "понты для нищих", даже на идеально подготовленную поверхность положить без "касяков" крайне сложно(даже проффи) В ходе эксплуатации(изменение температуры и влажности) шмы начинают "бежать", может и края подвернуть(крайне мало, 0,2-0,3мм) но выглядит это.... Про "колдуна", я чуть выше написал. В Германии за такое можно сильно пострадать, и по деньгам и по запрету лицензии(Meisterbrief).
Would take me days to do the corners alone. Guy just does it automagically. Granted the video might be sped up but still I would have to think about each corner plank each time. Guys a true expert.
That's beautiful! Thank you for sharing your talent. It looked like having to put a 1500 pc jigsaw puzzle together, but cutting the puzzle pieces as you go. Great job!
Such patience! How admirable! We never can afford such artistic ability in our homes, but we love your work! Well done! "We wish our flooring could look as good as yours!"
You know when someone is a good installer when they never use a measuring tape to make cuts. I love installing glue down lvp in a herringbone, it's lots of fun. I'm a commercial flooring installer myself. Good work, man.
Genuine question but whats wrong with using measuring tape? Im no expert at all but they way he cuts them only works in perfect paralel walled room no?
@@Spacidius nothing wrong with using a tape. It's just much faster and cleaner scribing it. He is just marking his long point on the board and cutting his angle. You can use this method on very out of square rooms and it works great. On your first cut piece, you can lay a temporary piece in place then overlap it with another piece horizontally tight against the wall then draw or cut your line. Then you have a pattern piece. Hard to explain without drawing a diagram or showing in person. There's probably a video that explains how to scribe lvp, I'll look it up and share a link with you if I find it.
Мастер супер!!! Вот вроде бы, зачем мне женщине знать как укладывать ламинат))) а залипла на всё видео! Как говорят у Русских- " Есть три вещи, на которые можно смотреть без конечно, огонь, вода и как человек работает."
@Joe Andersen still a bad testimony. Now I'm co vinced your a bot though. Thanks, now I can report your account and not just your garbage span posts. I'm just not sure to what end you're spamming everyone.
첨에 쓸데없이 배경음 개 웅장하다고생각했는데 뒤로갈수록 너무 잘어울림ㅋㅋ 평면공간의 이해도가 엄청나시네요. 기술적으로 익힐수있는부분일수도있겠지만 그렇다한들 대단한것같음.. 일당 두배 킹정ㅎㅎ 어릴때 수학 배워서 어디다쓰냐 생각하는데.. 이런 곳에서 쓰이는것도 다 수학이겠습니다ㅎ
@@user-cc4sp4fd3s Я тоже думаю что это такого рода халтура. Потом начнёт задираться и отваливаться соответственно. Моему начальнику тоже китайцы делали плитку. Сделали быстро, хорошо. Потом вся плитка отвалилась.
@@tamar_palma это голимая халтура, первичное обветривание клея, это 10-15 минут. Больше квадратного метра, клей не наносят! Прокатка вальцами(50-75кг) в первые 20мин. обязательно. Подготовка поверхности...... Ну, а скорость подрезки... даю Вам две недели(каждый день по 8 часов) геометрию обьясню, будете резать быстрее!
Everyone talks about his superior angles skills and im here adoring that he doesnt waste vinyl planks and cuts scraps untill they dont fit anywhere. Thats some extra material managin skill
Very minimal waste indeed. I’m sure he’s only using factory edges to butt up against the other flooring. Some waste is inevitable
Those are not planks. Hope he paid almost zero for this
@@apostolosfilippos what would you call them.? Because I do flooring as well and we would most definitely consider them planks
Nothing special here. I do this every day. But on a prepared surface. This floor is not properly flattened.
@@apostolosfilippos these are planks. Just not wood.
My man must’ve aced geometry! He’s a master of angles. Watched that entire video in awe of how he made every piece fit like a puzzle. Very satisfying to watch knowing I’ll never lay a floor down like this…
That's the experience
@@KennyKamanzi you're right.
Just easy technics for pvc floor tiles. Rly no big deal
@@JohnDoe-vm1rr it's still consider big deal dude you know it yourself and that work still need bit of effort if you didn't have any experience or you have you don't have to be overestimate your experience or look down on others work , because they gained it and work hard for it.
@@JohnDoe-vm1rr well I can’t do it, so for me it was just really satisfying to watch.
If this whole flooring gig doesn't work out for him, he could be a geometry professor. This is a master class on angles and craftsmanship! 10 out of 10. The best there I've seen. Mad skillZ!
초반에는 나도 하겠는데? 싶다가 대충 슥슥 대보고 칼로 잘라내시는데 딱 들어맞는거 보고 괜히 전문가가 아니구나 싶었어요 진짜 기술최고
시간 순삭~
넋놓고 보게 됨
무슨 테트리스도 아니고ᆢ
대단하십니다 ~!!^^
무언가 굉장히 쉬워보인다면 그사람이 잘하는것이다
라는 말이 있지만 보기에도 어려워보여서 너무대단하심
I'm more impressed by how you figured out the angles and cuts for the sides, than the pattern. Very cool!
The way he cut the pieces to fit just perfectly is pure satisfaction 👌
This man is a master of side cuts. That's a 100/100 for me. He made it look easy and simple, but boy I'm sweating watching him cut those side pieces.
I agree...100%Master of side cuts. We hired a so called tile layer for our house. We had to fire him & he left with our$. Tiles on the floor toes busted, edges look a mess in one bedroom & kitchen.
9
@@safi.4537 i feel you man.
True! But how come the glue holds up so long? That makes me nervoud
@@LissaDIY i dont know. Hahaha
I'm not sure how I ended up here but this was an amazing job. Bravo!
I have had the same feeling. I just stumbled on this.
Same here 😆
😂😂😂 When I read your comment, I nearly fell out of my chair laughing. I think maybe this video had me mesmerized. Pretty sure I didn’t know I was here. Really sure I don’t know how I got here. Thanks. A good belly laugh is needed occasionally. 😂😂😂
So nice of you to show us how you do it! You're a genius 👏🏻
타일을 이용한 건축 특성화 ~!! 고급스런 이미지 연출 대단해요~!! 정교함으로 안전하게 시공하는 시공자의 모습이 멋져요~!!
영상을 정상속도로 보면 계속 오리걸음으로 내내 작업하시는데 정확하게 제본하는 모습이 인상적입니다. 대단.
Сижу завороженная, смотрю как другие "быстро делают ремонт".
Можно мастера выписать? А то мой ремонт меня уже достал 😂, а он один наверное всё сделает...
Мастеру респект! 👍👍👍🔥
Это коммерческое помещение, делается тяп ляп, это на видел красиво в реальности все гораздо прозаичней.
А я думала, что одна зависла на работе МАСТЕРА! Браво!
Молодец!!!
Аналогично
ruclips.net/video/Nl3R_iz6F-I/видео.html...
If I ever needed to give a thumbs up to a video; this guy deserves one!!!!!!! That was awesome and made it look way easier than it is.
Extremely satisfying to watch, I admire the skill and craftsmanship. The flooring looks great too.
Я в шоке! Точность какая, нигде не ошибся, даже в маленьких вырезах! Умелец высшего уровня!!!👍
Просто на камеру это не видешь
Если ест желание умение сама придёт.
@@user-rf4eg9jk3m он последние 20 лет только этим и занимается ,больше ничего не умеет :)
так это в корее же. где стены и плинтуса ровные абсолютно, после наших мастеров он бы никогда в жизни так не положил бы)
@@moguslov а больше и не надо!!!))
모서리, 튀어나온 부분 재단한 조각이 딱딱 들어맞을 때마다 쾌감이!
This is my favorite all time movie!!! I felt so accomplished!! Exceptional job! I loved the rolling stool! 😍
Was watching a preview of this video but ended up watching the whole thing, amazed at the brilliant job you are doing, you make it look to easy.
와...뭔가요?엄청난 기술력입니다.
난해한 부분구간에선 몇번이고 되돌려봤네요.
보는 내내 신기하고 홀리듯 봤네요.
시공하시는 사장님 정말 훌륭하시고 존경스럽네요
사람을 위한 기술 사람을 사랑하는 인내심입니다.
건강하시고 나날히 행복하세요
저정도. 까지의
인고의 세월을 이겨
낸거 참으로 대단하십니다.
돈 많이버십시오.
인테리어 할 것도 아닌데 영상 왜 이렇게 중독성 있죠~? 알고리즘에 떠서 계속 보게되네요😅🤣😆
Let's Appreciate Him as because he setup the flooring all Alone with perfection. Hats Off to his hard work. 👍👍👍👍
What a guy! He made it look so easy like gliding across the floor. He’s a genius on what he does. Thanks for sharing 👏👏
Qf
he's just glueing plastic planks on the bare floor, maybe a beautiful wooden floor...
@@carlj7466 im waiting for ur video 😋
@@carlj7466 nah I just wanna see how u do it by yourself when u call it easy to learn 😊
@@carlj7466 nah I just wanna say that u couldnt do it like the guy in the video.
The critical part is getting your center and guide lines laid out before adhesive goes down. You can see his pencil lines at the start. Pause the video right when he lays the first strip down. You can see the center line and crossing angle for the first strips. Once those are correctly placed, he's off to the races. Without a proper layout, the job would be crooked and look terrible. Meticulous preparation is key and he did it. Excellent work.
Don’t forget the surface prep. A dusty or uneven surface would ruin the job. At least half the work/ time of this project is not laying the pieces. It’s scrubbing the surface, leveling compounds and meticulous vacuum and sponging down surface.
All this was done perfectly. Shame they didn’t show it here. (Maybe it was another team or contractor)
It is awesome when he's looking for angles and sides for cutting. He did very quickly and perfect
영상을 언제봐도 대표님은 존경 스럽습니다
나름대로 꼼꼼하단말 많이듣고 자란 30대 남성입니다. 흉내도못낼만큼 완벽하시고 셈세하시네요 . 멋있고 리스펙하고 갑니다^^
While he does exceptional work, the cutting of angles are much easier than most think. The utilization of every piece of material is the impressive part to me and I have been doing commercial glue down for 20+ years! I would hire this guy on the spot!
You must be a scab like him then huh?
@@Timshky how so ?
@@Timshky is that a bad thing. Dint quite get this
@Joe Andersen wtf
@Joe Andersen come on this dude making a new floor and then u came up from nowhere talking bout the bible? xD
Супер мастер,и матерьял использован экономно,все уголки так точно отрезаны,простой человек без опыта и навыков голову сломает как это сделать и без ленейки,спасибо за это видео.Просто восхищенье от такой работы.Браво мастеру.
А что это за материал?
@@user-gw5bo4qz1e ламинат гибкий. есть самоклеющийся. классная штука, такой думаю постелить, может поверх старого даже может попробовать.... мастер просто колдунство делает!
@@wasiks2011 большое спасибо!
@@user-gw5bo4qz1e "PVC", то как делает этот "перец", повторять не рекомендую! Не подготовленная поверхность (следы старого клея, шпаклёвка непойми чем белым без шлифовки) эти "касяки" через неделю будут видны, а при окнах в пол.... видок будет как на разбитой дороге. Пересохший клей (время первичной реакции при комнатной температуре от 10 до 15 минут, дальше можно не класть, всё равно переделывать). Значит мыть пол нельзя("зазвенит" или просто отвалится)только протирать, аккуратно. Про вальцовку готовых зон просто забыли(значит "гребёнку" тоже будет видно, красота). Ну, по подрезке всё норм(кроме газовой горелки, вроде свет в помещении есть?), занимаясь укладкой подобных вещей, на подрезке перестаёшь заморачиватся уже на второй неделе.
@@wasiks2011 Ламинат это прессованый картон. Это "PVC", могут обозвать "винилом"( в Германии так) но это одно и тоже по сути. Самоклеящийся... это "понты для нищих", даже на идеально подготовленную поверхность положить без "касяков" крайне сложно(даже проффи) В ходе эксплуатации(изменение температуры и влажности) шмы начинают "бежать", может и края подвернуть(крайне мало, 0,2-0,3мм) но выглядит это.... Про "колдуна", я чуть выше написал. В Германии за такое можно сильно пострадать, и по деньгам и по запрету лицензии(Meisterbrief).
남는 공간 조각 끼워 넣는 작업
정말 정말 예술이네
Не оторваться от работы мастера! Дело мастера боится)
와.. 이걸 내가 와 보고 있지 싶으면서도 이건 전문가에게 맡겨야 겠다는 생각을 하게 되네요 ㅋㅋ 잘 보고 갑니다!
HABIB BAHAR MARAH BESAR - USTADZ NYA WAHABI SEBUT AYAH IBU NABI MASUK NERAKA ! ruclips.net/video/PA9hIQaqOls/видео.html
그냥 아무나 해도 될것같아요 ~~~
저두 데코타일시공기사이지만 솔직히 말씀드리자면 양인테리어님의 영상은 항상 저의 스승같은 영상입니다^^
항상 깔끔하고 완벽한 시공영상보면 저의시공법 다시한번 되돌아보게 하며 또한 배우게 됩니다
항상 건강 챙기시며 좋은영상 많이 부탁드립니다
Amazing! I couldn't put my floor down strait with out making mistakes. Great job.
알고리즘이 갑자기 띄워줘서 홀린듯이 봤는데 모서리 재단 원리는 결국 이해하지 못하고 영상이 끝남 ㅠㅠㅠ 너무 멋있네요
ㅋㅋㅋㅋㅋㅋㅋ저도 ㅋㅋㅋㅋㅋㅋ결국 이해못함
5분부터 나오는 모서리 재단은 그래도 좀 이해가 가는데 나머지는 전혀 모르겠어요 ㅋㅋㅋ
나도 ㅋ
아오 궁금해라
각은같고길이만조정
Would take me days to do the corners alone. Guy just does it automagically. Granted the video might be sped up but still I would have to think about each corner plank each time. Guys a true expert.
I'll just Up your comment, you said all I had in mind 😂
I think he's done this before! Maybe a few times.
,
Точность отрезания поражает:Браво, Мастер!
That's beautiful! Thank you for sharing your talent. It looked like having to put a 1500 pc jigsaw puzzle together, but cutting the puzzle pieces as you go. Great job!
He makes it look so easy, but the truth, it's very very hard and confusing, he's a genius.
I’m trying to figure out the method and I’m pretty sure my brain just doesn’t have that function.
☺🤗🤗😉😀
You just need him to show you how the calculation is done from his view. Not yours.
And you are definitely correct have a story to tell lol lol just say we had to get the PROFESSIONALS till day we laugh
@@muhammadsyaiful8442
Easier said than done.
Вот это да!Красиво как,какое мастерство,как точно,на работу мастеров никогда не надоест смотреть,мастер золотые руки!
Пожалуйста, а лучше заведите себе мужа работящего с ровными руками.
Будете постоянно смотреть.
@@user-xo3uv6wr2c у нее есть,но он лежит на диване и пиво глотает.
Best floor guy I've seen. Good job, his accuracy without measurements is impeccable.
이분 IQ 최소 멘사👍👍👍
멋짐니다.그대의 전문기술을 응원합니다.
감동의시간이었습니다👍
Отличный мастер, высший класс, техника отработанная, на ходу легко и просто, любо наблюдать за ним
Пожалуйста, смотрите будьте здоровы. Мы старались.
Lo hace ver, como si fuera muy fácil y noooo !! es increíble su trabajo 😎👏👏👏👍
아무생각없이 빠져들어서 보다보니 끝까지 봤네요, 👍👍
Beautiful and no waste.We need more people like him here in NY. I Love it.
Brings back memories, did floors for 25 years, once you know the formula, the hardest part is getting that first piece exactly where you need it .
Смотреть одно удовольствие, как пазлы слаживает, мастер своего дела.👍
凄く正確に張り詰めてて仕事も丁寧ですね。
見入ってしまいました。
어느분야든 전문가는 그 경지에 대한 경이로움에 존경스러운 맘이 자동으로 생기는 것 같습니다. 멋있어요
Вот это мастер золотые руки! Обалдеть! Слов нет! Браво!
Они там в Южной Корее все работают так быстро и аккуратно и по 11-12часов в день!
@@user-dn8ul6yp3g 👍
Фантастика!!)) такое лёгкое владение практической геометрией , буквально на клеточном уровне!!!)))
Гениальный Раскройщик!!!))
А что это? Линолиум?
@@user-gw5yb5yc6v пвх плитка с монтажом на клей. Говно то еще. Замковая лучше, но класть "елочкой" нельзя.
Можно бесконечно смотреть на огонь, бегущую воду, работу мастера.
I'm so happy you smaller dudes are so good at flooring. We love u. Sincerely bad back man.
프로는 탑프로입니다
경이롭습니다😄
На такую работу можно смотреть бесконечно!!
The rate he articulates to perfection is UNIMAGINABLE‼️
Просто завораживает работа мастера, не могла глаз отвести. Всё сделано с такой точностью, просто супер.
Завороженно просмотрела видео, мастер золотые руки 👍🏻👏👏👏❤️
I was a HS math (geometry) teacher and these are exactly the videos I liked to show. Real world application! Love it!!
Such patience! How admirable! We never can afford such artistic ability in our homes, but we love your work! Well done! "We wish our flooring could look as good as yours!"
I HOPE ALL IS WELL I MISS YOUR PODCASTS.
GOD BLESS YOU AND YOUR FAMILY
보면 모서리 부분 타일을 맞출 때
하나는 기존에 깐 타일에 겹쳐 올려놓고 나머지 하나는 모서리에 다 밀어넣은 다음 기존에 맞춰둔 부분하고 겹치는 부분을 잘라내는 방식으로 딱딱 맞추시네요 좋은거 배우고 갑니다 ㅎㅎ
Офигеть! Комната за 15 минут! Даже если замедлить в 4 раза,это всего 1 час получится! Ловкость рук и никакого жульничества! Браво,мастер!!!👍👍👍👏👏👏
На 3 комнаты, около 48кв/м таким же материалом закатали за 2 часа. Правда ëлочкой мы не заморачивались, положили ровными листами.
@@RUSTEM16RUS а что это за материал ?
Как материал называется?
@@user-yd4pg1ur6w кварцвинил
@@RUSTEM16RUS подскажите пожалуйста что это за материал?
훌륭하십니다,,멋진 유익한 영상 고맙고 아주잘보고 갑니다,,항상 행운이 함께하시길 간절히 바랍니다,,화이팅하세요,,
社会はこうしたスキルをもつ職人によって、美しく、清潔に、快適に過ごせているんだね~。看取れちゃいました💕
You know when someone is a good installer when they never use a measuring tape to make cuts. I love installing glue down lvp in a herringbone, it's lots of fun. I'm a commercial flooring installer myself. Good work, man.
Genuine question but whats wrong with using measuring tape? Im no expert at all but they way he cuts them only works in perfect paralel walled room no?
@@Spacidius nothing wrong with using a tape. It's just much faster and cleaner scribing it. He is just marking his long point on the board and cutting his angle. You can use this method on very out of square rooms and it works great. On your first cut piece, you can lay a temporary piece in place then overlap it with another piece horizontally tight against the wall then draw or cut your line. Then you have a pattern piece. Hard to explain without drawing a diagram or showing in person. There's probably a video that explains how to scribe lvp, I'll look it up and share a link with you if I find it.
이런 영상이 많아야 기술이 필요한 일들이 적정대우를 받는거같아요..저도 보기전엔 왜 두배나? 이랬는데...영상보고나니 그런 생각이 완젼 사라집니다.
까는 소리 ㄴㄴ 어차피 인테리어 장판.도배 등 업자 일당은 정해져 있음 저런 하급기술로 일당 두배 처먹으니 기술업에서 사기꾼 쓰레기 소리 듣는 거 시간이 오래 걸리니 일당 2배라는 영상 어그로 이길 바래야지 저걸로 일당 2배면 귓빵망이 일단 올리고 다시 물어봐야 정상
@@user-ef4np9md4h ? 하급기술이여도 시간 오래걸리면 더 받아야되는게 정상 아님?
@@nonoyesno9638 ㄴㄴ일당으로 칩니다 견적 문의 할 때도 일당으로 치고 오래 걸린다 해서 추가일당 이런 건 없어요
예를 들어 3시간 견적으로 2시간 짜리 작업이다 그래도 무조건 일당
기가맥히네요...줄타고 계속 보게 되네요...화이팅~~~~^^*
Your work is second to none outstanding work God continue to bless you and your family
진짜 커터칼 하나 가지고 슥슥 자도 없이 코너 딱 맞게 재단하는게 신의 경지시네요...
와..진짜 멋있네요-!!! 거침없이 벽부분쪽을 퍼즐맞추듯이 딱딱... 진짜 시간 가는 줄 모르고 봤어요!! 진짜 대단하신 것 같아요!!
결과를 뻔히 알면서 끝까지 보게되는..ㅋㅋㅋ점점 속이 시원해지면서 뭔가 힐링도되고..숙련자의 솜씨란 ㅠㅠ 멋지세용~!
Так ловко, смотреть приятно, но делать наверное трудно
Молодец👍👍👍👍👍👋👋👋
Мастер супер!!! Вот вроде бы, зачем мне женщине знать как укладывать ламинат))) а залипла на всё видео! Как говорят у Русских- " Есть три вещи, на которые можно смотреть без конечно, огонь, вода и как человек работает."
Это не ламинат
Это не ламинат
Завораживает! Глаз не отвести. Супер.Браво,Мастер!
@@DonRomario А это что за материал?Дайте информацию плиз
@@gooodman7369 плитка ПВХ. Ещё ее называют виниловой плиткой
I’ve laid a lot of LVT flooring. This dude is next level. Bravo!
Agree!
Bravissimo
@Joe Andersen please stop spamming. If you're a Christian your behavior is a bad testimony.
@Joe Andersen still a bad testimony. Now I'm co vinced your a bot though. Thanks, now I can report your account and not just your garbage span posts. I'm just not sure to what end you're spamming everyone.
허...본드 마르기전에 저걸...장인이십니다
He did all that without 1 beer. That's awesome! Top notch quality work.
저정도는예술경지인듯요.대단하십니다
The title says “I’ll teach you how…”. The only thing I learned was not to try this on my own.
Beautiful job!
Mr. Yang, you're building a good world. 😁
Слов нет.Просто супер!!! .Приятно наблюдать за работой Мастера.
I can’t believe I watched this 14 minute video without getting bored
Lol, that was my exact thought 🤣. Absolutely amazing workmanship.
Same here.
Me too.
Me too, salute to the man....
첨에 쓸데없이 배경음 개 웅장하다고생각했는데 뒤로갈수록 너무 잘어울림ㅋㅋ 평면공간의 이해도가 엄청나시네요. 기술적으로 익힐수있는부분일수도있겠지만 그렇다한들 대단한것같음.. 일당 두배 킹정ㅎㅎ 어릴때 수학 배워서 어디다쓰냐 생각하는데.. 이런 곳에서 쓰이는것도 다 수학이겠습니다ㅎ
So glad they slowed this footage down, you should see this at normal speed. . .great work.
여기 영상은 외국분들도 많이 보시네요. 전문가분들은 작업할때 자세부터 다른거같음 ㅎ 멋져요~
My dude. The sheer amount of intelligence and patience that went into this project is incredible. Mad respect!
Eu quero ??????
It's vinyl flooring, can't be too intelligent 😆
I meant more with the precision cuts, and herringbone can be complicated if you don't know it. I'm just showing respect for the good work.
@@EpicGamer-ny1fu You obviously have never done any type of floor installation.
@@hotdog4698 Yup not like I spent my 20s doing just that 😅 moron
This fellow knew what he was doing, not his first day on the job!
Good work! 👍
넘 멋지시네요
최고의 전문가이시네요 👍👍👍👍👍
정직하고 진실하게 일하시는 모습을 보니 박수쳐 주고싶다
Прекрасно!!! Молодец!!!
Спасибо! Было очень приятно смотреть, как ловко и старательно трудится этот человек! Здоровья Вам !
Man has amazing spatial awareness! The way he can visualize how to fill in the negative space has me in awe. Respect!!
캬...칼질 볼수록 예술이네요
어떻게 정확하게 치수를 칼 하나로 하는것도
신기합니다.
Parabéns! Que talento incrível 😍
My lower back hurts just looking at HIM work.
My math suddenly became blurry and I totally forgot my puzzles.
정말 대단합니다. 경이롭네요.
넋놓고 보고 있다가 내릴 역을 지나칠 뻔 했습니다.
Я досмотрела до конца - это захватывающе!!! И почти не сомневаюсь, что он в состоянии сделать эту работу за 15 минут!🤓🌹
Без подклинивания будут маленькие щели...грязь, ответит покрытие быстро...
@@user-cc4sp4fd3s Я тоже думаю что это такого рода халтура. Потом начнёт задираться и отваливаться соответственно. Моему начальнику тоже китайцы делали плитку. Сделали быстро, хорошо. Потом вся плитка отвалилась.
Ролик с ускорением. Работал он в другом темпе, не 15 минут.
@@tamar_palma это голимая халтура, первичное обветривание клея, это 10-15 минут. Больше квадратного метра, клей не наносят! Прокатка вальцами(50-75кг) в первые 20мин. обязательно. Подготовка поверхности...... Ну, а скорость подрезки... даю Вам две недели(каждый день по 8 часов) геометрию обьясню, будете резать быстрее!
@@Тохин я ещё думала , что может это он грунтовку наносит, а плиточки эти самоклеющиеся, есть такой вариант сейчас таких плиток.
Wow this guy is awesome to watch. What I didn't learn from my compadres i learned just by watching this man.