Tech Tip I Changing Heat Systems I T300

Website: www.weldmaster...
Machine Page: www.weldmaster...
This tech tip demonstrates the proper way to change from your hot wedge to your hot air system and vise versa on your T300.
First thing you’ll want to do is to unplug our phoenix plug. Then you’ll need to unscrew the four bolts that’s behind the Hot Wedge Heat System. Take it out and replace it with the Hot Air Heat System by screwing in the four bolts, insert the phoenix plug along with plugging in the air hose. Now that the Hot Air is set up, we’ll need to install the nozzle into the heat system. Swing the Heat System into position, insert the nozzle in, clamp it tight and square it up to the weld roller. Once that’s set up, you’ll want to go to your HMI screen to adjust the alignment of the nozzle. Start by moving it to the left, adjust it down and bring it into the weld rollers. Unlike the Wedge, you'll have a gap behind it so you won’t be able to touch the wheels. Now that you’ve got it in the correct position, click your save button, and return to the home page. You are now free to swing the nozzle in and out. You can always re-adjust the nozzle if anything is off while welding your material.
For more information please contact our service team:
Phone: [phone]
Email: [e-mail]