I DID IT! This was my first time to ever field strip and re-assemble. I had heard horror stories, but perhaps by changing out to the TK bushing during the process I saved myself the horror. Yes, a couple bumps in the road but don't panic, don't force anything and keep rewinding as necessary, you'll get it.
The ABSOLUTE BEST PART of this video is explaining how to move the little spring so that the pin slides easily. I tried the hammer method, but gave up because I was unsure that I might do damage. By following your instructions, I had the bushing replaced before your video was even completed. Magazines slide out with ease, and take-down and reassembly is so much easier now! Thanks!
After watching the video for weeks I finally got the balls to try to put it in. 5 minutes later the magazines were dropping out like a 1911! The BEST video on the web. Thanks Tandemcross.
This is the best you tube on putting this bushing in , It is simple if you follow his directions. I am 60 years old and did this in a matter of ten minutes after seeing this film. Works great. I would recommend this part if it is the only part you put in your 22/45.
Jim that is our goal. Make installation easier. The firearm is already difficult enough to strip so getting this part in with little effort is important. Thank you for the feedback!
Easy ordering, fast shipping, good instructions, easy install, wow! This bushing has changed my mark iii from a persnickety pain, to what it should be! Thank you!
Was going to take it to a Gunsmith but decided to watch your video. Didi it step by step like you showed and was in and done in less than 15 minutes. No more mag hang ups. Everything is running smooth. Thanks for your great support as well as all your other products for the Ruger 22/45 MK III.
This worked! I had already put the sear in thinking that I didn't need the bushing then decided to put the bushing in so I had to do a lot of it twice. This video makes the job easy and the magazine drops out like a rock.
Great video! I ordered a bushing and also the McFadden magazine loader. Thanks to this video I had no trouble installing the bushing in just a few minutes. My 22/45 functions perfectly. No more magazine headaches!
i recently bought Mark III 22/45 Bushing and Bumper Combo,TAC SOL PAC-LITE COMPENSATOR BLK and i have to tell you that im the most satisfied customer that you ever had. thank you so very much for that.keep up te good work
I was just looking up videos for this, as I picked up my MK III last night, while my lady is getting her 22/45 tonight. I came across this video this morning in researching how to install hers, as mine was cake, but I was wondering about the molded grips-style. Low and behold the cheapest price on eBay was you and I ordered from you (because you were the lowest) before even seeing this video. Thank you, we will do hers tonight...
i knew if I waited long enough , someone would make a quality bushing vs. all the washer mods i saw 1-2 years ago. Headed to your site to order to chandler, az right now!
Done deal, bushing complete as well as sling shot mod. Thank you for the quick shipping and instructional video. Took all of 20 minutes to be done from start to finish.
I purchased the bushing about a month ago, just got around to installing. I watched this vid on the install while installing, had to pause a few times, but within 20min, I have my 22/45 up and running with the new bushing. GREAT VIDEO, but I might add...using a punch to capture the parts and realign them for reassembly helps alot. Thanks for the vid and product!!!!
Thanks for this little part and the video. The magazines come out easily now as they should. No more putting the mags in for disassembly/assembly. Works like a charm and way better solution than hacking it with washers.
Got my bushing today and even though I pulled the pin to far and the safety fell out, I was able to get it all back together in less than 3 minutes with everything working perfectly. Thanks for the great product and the excellent installation video! Now just waiting for the new sights I ordered from you guys.. :)
freeride21a. Thank you so much for the feedback! We are happy the install went smooth. We try to go to great lengths to make sure customers are satisfied and educated.
just got this in the mail.watched the vid and it was gravy.not only does the mag drop like nothin' the trigger pull does seem a little smoother and crispier.thanks for the great vid.took all of 3 minutes to install.
I just got through doing this mod. I ended up taking the safety out but I learned a lot about my Ruger 22/45 lite while putting everything back into its correct place. Even so, this mod took me about 15 minutes, and that included a good cleaning and lube. The mag's drop right out easily. The mags are a bit loose, but they seen to stay in place ok. I'll know better after put a few hundred more rounds through it.
annnd 3 days later, the tandemkross bushing is installed in my mkiii and working beautifully. Thank you so much. This mkiii will be passed down to my son, and then to his, so it will see some use.
Just installed this and wow. So much easier to reassemble and insert/drop mags. It blows my mind that this isn't a stock part. For the price, it's a no brainer for any MKIII.
Picked up the bushing kit, loaded chamber removal kit and some sights. Install was a breeze and 100% worth the time and money. Going to take some time getting used to the mags dropping out :) Also did the magazine tuning, which was a great improvement as well.
Great product and video. I just recived this as birthday gift from a friend. Now my MK-lll works the way it should have worked from day one. Thank you.
Just fitted my TK hammer bushing and TK Victory trigger thanks to this video and another. Never taken the gun apart before. It was really easy. The action feels way more crisp after installing these 2 parts. Also have a LCI replacement but I have a 22/45 lite so the come doesn't come out easy. Thanks for the videos!
Awesome video and product. I just brought my first 22/45 home but was bummed about how difficult it was to manipulate the magazine both in and out. A little Google search brought me to your bushing, thanks again, ordering one now.
I wish I had found out about this the other day. The mag release is one of the biggest reasons I choose not to go with the 22/45. I didn't think to look for an aftermarket fix for it.
I have the 22/45 Gold anodize Lite (Catalog# P45MK3ALRP) This bushing has worked perfectly (500+ rounds) so far. The magazines dropping freely is reason enough to purchase! And, if you can strip the pistol down for cleaning you will be able to do this install. The directions in this video are 100% correct.
Pretty Good video. At some key points, the focus seems to be on the mat (parts on the mat are in pretty sharp focus), but the parts being worked on are slightly out of focus. This makes checking orientation of small parts more difficult. For example look at 5:40 - 5:50. Checking the small parts in the gun in my hand by comparing with the video at this point is difficult. Other than this picky point, this installation was less of a problem than I had feared.
I just installed the bushing on a 22/45 I picked up used 2 weeks ago. Everything that could go wrong did. springs fell out before I could see where they belonged The hammer pin slid all the way out on me. The worst was that the sear dropped back and I missed it. It took me an hour to figure out its' proper position. You might want to add a section on the proper position of the sear. I finally got it back together and all looks good. Next to the range.
Just a little tip from a future customer; may want to put your companies website in the notes, maybe even a link to the part you're selling. On your site right now placing an order :)
Hi Airmonger. That is a Burris Fast Fire II. The baseplate is drifted into the read sight slot and the sight mounts to the baseplate. We often get a lot of comments on it and it shoots like a dream.
Hi Dubbin1 and David G, the bolt absolutely should lock back after the last round as the bushing has nothing to do with this function. We have had this complaint before and the issue was a reassembly error for another customer. We assisted them over the phone and they were successful. I suggest you call our support for help.
You are more than welcome. If you have other issues with your favorite firearms let us know. Our engineers are always looking for new project. Our goal is to design generic solutions to common firearm issues that the manufacturers can't or won't solve.
It will make disassembly easier, because you won't need a magazine - other than that it will be the same process. It will not affect your last round hold open.
Sounds like you know what you are doing unfortunately your vid needs more lighting to see what parts you are talking about. I dont own one yet because of the this feature would love to be able to make the switch with confidence. thanks for the vid it was informative I might buy and try.
Jake, I am not good at doing these types of things. Can you recommend anyone in the Phoenix area I could take it to? Or if I send the gun to TK. will they do it?
I did this mod. When the magazine is empty it locks securely in place. However, even if I have one round in the magazine, I can easily pull it out without depressing the release. Have you had that experience? When I put a loaded magazine it feels kind of mushy and not a really secure snap. Never had one fall out but it just doesn't seem right.
If you are used to the pressure on the magazine from the lever from the disconnect bar and you then remove this pressure the magazine may seem loose to you. However this is the normal fit for the magazine without the added pressure of the Mag Disconnect bar pressing on the back of it any longer. The magazine will have some play, but will be seated and in the gun properly. If it has a lot of excessive play you may want to clean up your mag-release button and the surface that makes contact with the magazine. Hope this helps!
Great video but it looks your camera is not auto-focusing. So when you bring the gun up off the table, the focus remains on the table so the gun + parts are not in focus. Very hard to see what you're actually talking about.
Oh my God this firearm is so frustrating! I have followed your instructions, Nuttnfancy & others and cannot get the mainspring housing in. I push up, it snaps in place, Iput the pitol in the correct position & push to close & it pivots, as if on a lever un "snapping ".
If you can not put the magazine in and take the safety off and then dry fire (which is ok on the Mark III and 22/45 but be sure you know for sure dry before dry-firing any rimfire) then you might have something seriously buggered up. I would seek out the advice of a good shop or gunsmith.
Thanks for your question. This part does not work with the new MKIV 22/45 LITE. While the MKIV 22/45 LITE does still have a magazine safety, it is designed differently and does not cause the same issues with the magazines as the safety in the MKIII series.
Thanks for reply, I like the Victory trigger better than the VQ trigger, I had contact VQ, They have to sell the Whole kit for the Mark IV 22/45 Lite, If I just got the trigger from you guys, How much will decrease the pulling weight? Or I just order the Whole kit and have spear trigger.
Our trigger for Ruger 22/45 does not actually lighten the pull weight. The flat-face design of our trigger DOES offer the feel of a lighter trigger pull, as it allows the user to put their finger lower on the trigger and improve leverage. In combination with VQ internals, you will actually lighten the pull weight, plus have the benefits of a flat-face, textured trigger (better ability to pull straight back, improving accuracy, better grip, etc). Hope this helps answer your questions! Don't hesitate to reach out if you have any other questions.
When will your company offer the Sear and hammer and brushing and trigger for the Mark IV 22/45 Lite? Please soon, I can't wait any longer, She is a beauty. I did order your guide rod a year ago for the SR 22, great customer service.
Unfortunately I can't offer any specific timing details on MKIV 22/45 LITE products. But they are in the works! Upgrades for the MKIV and MKIV 22/45 LITE are going to be a big focus of ours this year. The trigger is already available on our website here: www.tandemkross.com/Victory-Trigger-for-Ruger-2245_p_197.html Thanks so much for your interest and your feedback - we appreciate your business!
Say that they're irritations with his gun is it gross understatement it's like saying politicians lie we all know politicians lie politicians lie a lot so are the annoyances with this gun
Just got mine in the mail today. Luckily I bought my 22/45 before they fell off the "CA approved" list here in the wonderful but equally fucked up state of CA. I sold my DA only Lc9 and now I can't buy the new striker fired version here in CA, it's illegal. Un fucking real these lawmakers are...
Good video and product, what should have been discussed a bit in more detail is when you do pull the pin, chances of pulling it all the way out are very high, in fact basically you will most likely pull it all the way out. When that happens a lot of pieces come flying out and the safety sear will need to be re-asembled. This can be done incorrectly which will cause a lot of frustrations, after some research I did get it back together again. Included is the web site I used for detailed re-assembly. www.guntalk-online.com/2245detailstripping.htm
Thanks for the feedback! We are always looking to improve our videos and install instructions, so this is very helpful. Hope you enjoy the bushing upgrade!
This video is horrible quality. Since this video is intended for the layman, instead of talking about components with fancy names that I keep having to pause the video to look up, jump to pictures of each component you talk about and maybe point at things. My head hurts.
I DID IT! This was my first time to ever field strip and re-assemble. I had heard horror stories, but perhaps by changing out to the TK bushing during the process I saved myself the horror. Yes, a couple bumps in the road but don't panic, don't force anything and keep rewinding as necessary, you'll get it.
The ABSOLUTE BEST PART of this video is explaining how to move the little spring so that the pin slides easily. I tried the hammer method, but gave up because I was unsure that I might do damage. By following your instructions, I had the bushing replaced before your video was even completed. Magazines slide out with ease, and take-down and reassembly is so much easier now! Thanks!
After watching the video for weeks I finally got the balls to try to put it in. 5 minutes later the magazines were dropping out like a 1911! The BEST video on the web. Thanks Tandemcross.
This is the best you tube on putting this bushing in , It is simple if you follow his directions. I am 60 years old and did this in a matter of ten minutes after seeing this film. Works great. I would recommend this part if it is the only part you put in your 22/45.
Jim that is our goal. Make installation easier. The firearm is already difficult enough to strip so getting this part in with little effort is important. Thank you for the feedback!
Easy ordering, fast shipping, good instructions, easy install, wow! This bushing has changed my mark iii from a persnickety pain, to what it should be! Thank you!
Was going to take it to a Gunsmith but decided to watch your video. Didi it step by step like you showed and was in and done in less than 15 minutes. No more mag hang ups. Everything is running smooth. Thanks for your great support as well as all your other products for the Ruger 22/45 MK III.
You're very welcome!
This worked! I had already put the sear in thinking that I didn't need the bushing then decided to put the bushing in so I had to do a lot of it twice. This video makes the job easy and the magazine drops out like a rock.
Great video! I ordered a bushing and also the McFadden magazine loader. Thanks to this video I had no trouble installing the bushing in just a few minutes. My 22/45 functions perfectly. No more magazine headaches!
i recently bought Mark III 22/45 Bushing and Bumper Combo,TAC SOL PAC-LITE COMPENSATOR BLK and i have to tell you that im the most satisfied customer that you ever had. thank you so very much for that.keep up te good work
I was just looking up videos for this, as I picked up my MK III last night, while my lady is getting her 22/45 tonight. I came across this video this morning in researching how to install hers, as mine was cake, but I was wondering about the molded grips-style. Low and behold the cheapest price on eBay was you and I ordered from you (because you were the lowest) before even seeing this video. Thank you, we will do hers tonight...
i knew if I waited long enough , someone would make a quality bushing vs. all the washer mods i saw 1-2 years ago. Headed to your site to order to chandler, az right now!
i have theirs and its great, but im pretty sure these have been around for 10+ years
Done deal, bushing complete as well as sling shot mod. Thank you for the quick shipping and instructional video. Took all of 20 minutes to be done from start to finish.
I purchased the bushing about a month ago, just got around to installing.
I watched this vid on the install while installing, had to pause a few times, but within 20min, I have my 22/45 up and running with the new bushing. GREAT VIDEO, but I might add...using a punch to capture the parts and realign them for reassembly helps alot. Thanks for the vid and product!!!!
Thanks for this little part and the video. The magazines come out easily now as they should. No more putting the mags in for disassembly/assembly. Works like a charm and way better solution than hacking it with washers.
Got my bushing today and even though I pulled the pin to far and the safety fell out, I was able to get it all back together in less than 3 minutes with everything working perfectly. Thanks for the great product and the excellent installation video!
Now just waiting for the new sights I ordered from you guys.. :)
That's great to hear! Thanks for trusting our parts! We're so glad to hear they're working well for you.
freeride21a. Thank you so much for the feedback! We are happy the install went smooth. We try to go to great lengths to make sure customers are satisfied and educated.
I got my bushing in the mail from you today.. I think it took me longer to take the grips of than install it. This video was perfect! Thanks! -David
Finally finished installing and getting it all back together.
just got this in the mail.watched the vid and it was gravy.not only does the mag drop like nothin' the trigger pull does seem a little smoother and crispier.thanks for the great vid.took all of 3 minutes to install.
I just got through doing this mod. I ended up taking the safety out but I learned a lot about my Ruger 22/45 lite while putting everything back into its correct place. Even so, this mod took me about 15 minutes, and that included a good cleaning and lube. The mag's drop right out easily. The mags are a bit loose, but they seen to stay in place ok. I'll know better after put a few hundred more rounds through it.
Thanks for the extremely helpful video. I was pulling my hair out. Didn't realize the sear had fallen out of its proper alignment. Thanks again.
annnd 3 days later, the tandemkross bushing is installed in my mkiii and working beautifully. Thank you so much. This mkiii will be passed down to my son, and then to his, so it will see some use.
Just installed this and wow. So much easier to reassemble and insert/drop mags. It blows my mind that this isn't a stock part. For the price, it's a no brainer for any MKIII.
Picked up the bushing kit, loaded chamber removal kit and some sights. Install was a breeze and 100% worth the time and money. Going to take some time getting used to the mags dropping out :) Also did the magazine tuning, which was a great improvement as well.
Very nice video. I used it to install the Tandemkross bushing I got in the mail today. I like not having the disconnect.
Great product and video. I just recived this as birthday gift from a friend. Now my MK-lll works the way it should have worked from day one. Thank you.
The video is extremely helpful, and I really like the performance of the pistol with this addition!!!!
Thank your Horst!
Just fitted my TK hammer bushing and TK Victory trigger thanks to this video and another. Never taken the gun apart before. It was really easy. The action feels way more crisp after installing these 2 parts. Also have a LCI replacement but I have a 22/45 lite so the come doesn't come out easy. Thanks for the videos!
Just got my hammer bushing from Tandemkross installed. Love the way the mag drops out now.
That's great to hear, Alan! Thank you for your business!
I purchased this bushing tonight. Thanks for making this video.
Awesome video and product. I just brought my first 22/45 home but was bummed about how difficult it was to manipulate the magazine both in and out. A little Google search brought me to your bushing, thanks again, ordering one now.
This is a great company to do business with. Don't hesitate.
+sworacle1 Thank you, that means a lot!
Got mine today from you guys installing that and the VQ sear. I can't wait to try it out.
Yaow, learning the hard way on this piece is a special kind of hell
Great video. I did this install in about 5 minutes after watching the video. Thanks!
I got one for my Ruger 22/45 and it worked great.
Thank you so much, I was stuck at the last step and then you explained very well.
Glad to hear the video helped!
Great product. Great video. This was a very easy install. Thanks.
Thank YOU for your business!
The part is useful, but the instructions are excellent! I'll be ordering the sling-shot for the 22/45 soon.
I have my parts and will install tomorrow morning. Bushing and few other parts.
Thank you for your business!
I wish I had found out about this the other day. The mag release is one of the biggest reasons I choose not to go with the 22/45. I didn't think to look for an aftermarket fix for it.
I have the 22/45 Gold anodize Lite (Catalog# P45MK3ALRP) This bushing has worked perfectly (500+ rounds) so far. The magazines dropping freely is reason enough to purchase! And, if you can strip the pistol down for cleaning you will be able to do this install. The directions in this video are 100% correct.
I'm ordering one as soon as 22/45 Lite arrives
Redshift313 Did you get your lite and have you experienced any problems with it?
wow. Awesome should be getting s 22/45 lite in a few days. Can't wait
Great product, easy to install. Empty magazines fly out when the button is pushed, takedown doesn't require a mag now.
Very helpful and informative video. I am going to order the replacement parts for my Ruger.
Pretty Good video. At some key points, the focus seems to be on the mat (parts on the mat are in pretty sharp focus), but the parts being worked on are slightly out of focus. This makes checking orientation of small parts more difficult. For example look at 5:40 - 5:50. Checking the small parts in the gun in my hand by comparing with the video at this point is difficult. Other than this picky point, this installation was less of a problem than I had feared.
A must have upgrade for the Mark 3
I just installed the bushing on a 22/45 I picked up used 2 weeks ago.
Everything that could go wrong did.
springs fell out before I could see where they belonged
The hammer pin slid all the way out on me.
The worst was that the sear dropped back and I missed it. It took me an hour to figure out its' proper position. You might want to add a section on the proper position of the sear.
I finally got it back together and all looks good. Next to the range.
Thank for the feedback, Elliot! Glad you got it all back together and hope you enjoyed it at the range!
Smooth as silk on the range!
Thanks for the how to video.
Just a little tip from a future customer; may want to put your companies website in the notes, maybe even a link to the part you're selling. On your site right now placing an order :)
Good tip!
Just do it, solves so many problems .
i just bought one of your bushings off of ebay. found this vid looking,lol
TANDEMKROSS What sight and sight mount is on this gun? It looks really clean.
Hi Airmonger. That is a Burris Fast Fire II. The baseplate is drifted into the read sight slot and the sight mounts to the baseplate. We often get a lot of comments on it and it shoots like a dream.
Great part and great video! Thank you.
Hi Dubbin1 and David G, the bolt absolutely should lock back after the last round as the bushing has nothing to do with this function. We have had this complaint before and the issue was a reassembly error for another customer. We assisted them over the phone and they were successful. I suggest you call our support for help.
Great video. You look like you've done that once or twice.
Haha, just a few times : )
Works perfectly, thank you!
Great Video!! Could you please tell me what is the brand and model of the red dot installed?
You are more than welcome. If you have other issues with your favorite firearms let us know. Our engineers are always looking for new project. Our goal is to design generic solutions to common firearm issues that the manufacturers can't or won't solve.
Great video. I say dump the paperwork you send with the bushing and just direct customers to this video.
Ordered one from you guys a few hours ago :-D
Does this change the assembly / disassembly procedure?
And, does it still lock open on last round ?
It will make disassembly easier, because you won't need a magazine - other than that it will be the same process. It will not affect your last round hold open.
Sounds like you know what you are doing unfortunately your vid needs more lighting to see what parts you are talking about. I dont own one yet because of the this feature would love to be able to make the switch with confidence. thanks for the vid it was informative I might buy and try.
Thank you for the feedback. This was one of our very first ones and we have since improved our process and lighting!
+TANDEMKROSS really wish you'd redo this, I am stuck putting it back together.
How did you mount your red dot on there?
I did the mod just fine. Everything seems to work fine except magazine ejection has not changed. It barely ejects. Please advise.
Jake, I am not good at doing these types of things. Can you recommend anyone in the Phoenix area I could take it to? Or if I send the gun to TK. will they do it?
Will this work in a Mk III not a 22/45?
ordered one
My hammer doesn't stay flat, something I did wrong?
PERFECT ! THANKS !
I did this mod. When the magazine is empty it locks securely in place. However, even if I have one round in the magazine, I can easily pull it out without depressing the release. Have you had that experience? When I put a loaded magazine it feels kind of mushy and not a really secure snap. Never had one fall out but it just doesn't seem right.
If you are used to the pressure on the magazine from the lever from the disconnect bar and you then remove this pressure the magazine may seem loose to you. However this is the normal fit for the magazine without the added pressure of the Mag Disconnect bar pressing on the back of it any longer. The magazine will have some play, but will be seated and in the gun properly. If it has a lot of excessive play you may want to clean up your mag-release button and the surface that makes contact with the magazine. Hope this helps!
Just ordered this awesome
Is the new one made of steel or aluminum?
Will this work on the newer 22/45 lites that don't have the mag catch??
Hi Glockman, as far as we know there are no 22/45s produced by Ruger that don't have the Magazine Disconnect installed. Could you provide a link?
Never mind...the lites all have it..however the mark iii will it work in that?
No problem! Yes this will work in the MKIII and all the MKIII 22/45 variants.
will this also work on the mark 3 hunter as well as the 22/45?
kc3ak Yes
Well I just put this in and now my bolt doesn't lock open except manually. Any thoughts??
Only problem I find with this bushing is the bolt doesn't lock open after the last round is fired. Now I'm in the search for one that works correctly.
i cant even take the tension off because the trigger does not work what do i do to take off the main spring
As well as the mark iii...they don't have the mag catch but don't fire without the mag...
Thanks Oldfashionrings. Jake has installed a Burris Fast Fire for this demonstration. We found it very effective and durable.
thanks super nice and easy to follow.
Great video but it looks your camera is not auto-focusing. So when you bring the gun up off the table, the focus remains on the table so the gun + parts are not in focus. Very hard to see what you're actually talking about.
Cool.
Oh my God this firearm is so frustrating! I have followed your instructions, Nuttnfancy & others and cannot get the mainspring housing in. I push up, it snaps in place, Iput the pitol in the correct position & push to close & it pivots, as if on a lever un
"snapping ".
If you can not put the magazine in and take the safety off and then dry fire (which is ok on the Mark III and 22/45 but be sure you know for sure dry before dry-firing any rimfire) then you might have something seriously buggered up. I would seek out the advice of a good shop or gunsmith.
It's this work on Mark IV 22/45 Lite?
Thanks for your question. This part does not work with the new MKIV 22/45 LITE. While the MKIV 22/45 LITE does still have a magazine safety, it is designed differently and does not cause the same issues with the magazines as the safety in the MKIII series.
Thanks for reply, I like the Victory trigger better than the VQ trigger, I had contact VQ, They have to sell the Whole kit for the Mark IV 22/45 Lite, If I just got the trigger from you guys, How much will decrease the pulling weight? Or I just order the Whole kit and have spear trigger.
Our trigger for Ruger 22/45 does not actually lighten the pull weight. The flat-face design of our trigger DOES offer the feel of a lighter trigger pull, as it allows the user to put their finger lower on the trigger and improve leverage. In combination with VQ internals, you will actually lighten the pull weight, plus have the benefits of a flat-face, textured trigger (better ability to pull straight back, improving accuracy, better grip, etc). Hope this helps answer your questions! Don't hesitate to reach out if you have any other questions.
When will your company offer the Sear and hammer and brushing and trigger for the Mark IV 22/45 Lite? Please soon, I can't wait any longer, She is a beauty. I did order your guide rod a year ago for the SR 22, great customer service.
Unfortunately I can't offer any specific timing details on MKIV 22/45 LITE products. But they are in the works! Upgrades for the MKIV and MKIV 22/45 LITE are going to be a big focus of ours this year. The trigger is already available on our website here: www.tandemkross.com/Victory-Trigger-for-Ruger-2245_p_197.html Thanks so much for your interest and your feedback - we appreciate your business!
Say that they're irritations with his gun is it gross understatement it's like saying politicians lie we all know politicians lie politicians lie a lot so are the annoyances with this gun
The hammer retention pin has nothing to do with the sear - but you kept saying "sear".
Just got mine in the mail today. Luckily I bought my 22/45 before they fell off the "CA approved" list here in the wonderful but equally fucked up state of CA. I sold my DA only Lc9 and now I can't buy the new striker fired version here in CA, it's illegal. Un fucking real these lawmakers are...
oh shit. Just got it. What a nightmare.
Great product sh*ty production quality of video. I could have shot a better close up with my cell phone..LOL BUt an AWESOME PRODUCT!!!
Good video and product, what should have been discussed a bit in more detail is when you do pull the pin, chances of pulling it all the way out are very high, in fact basically you will most likely pull it all the way out. When that happens a lot of pieces come flying out and the safety sear will need to be re-asembled. This can be done incorrectly which will cause a lot of frustrations, after some research I did get it back together again. Included is the web site I used for detailed re-assembly. www.guntalk-online.com/2245detailstripping.htm
Thanks for the feedback! We are always looking to improve our videos and install instructions, so this is very helpful. Hope you enjoy the bushing upgrade!
Bushing upgrade was a game changer, if there is only ONE upgrade on the Ruger MKIII .22/45 this is it. Thanks for a great product.
Thank you so much!
I have to watch a different video to figure out what the f you guys arent telling me.
This video is horrible quality. Since this video is intended for the layman, instead of talking about components with fancy names that I keep having to pause the video to look up, jump to pictures of each component you talk about and maybe point at things. My head hurts.
Hi Anthony, we appreciate the feedback. We're always looking to improve our installation videos.
Amazing product and thank you for the video assist.