Glock 19 Kci 50rd drum malfuction fix

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 48

  • @imravegod
    @imravegod 5 лет назад +9

    you're the only useful video I could find on this issue

  • @ericschroeman5020
    @ericschroeman5020 2 года назад +2

    i had to re roll that spring into the center, thank you i was clueless

  • @yvannvaldivia7856
    @yvannvaldivia7856 3 года назад +2

    This is what I needed to know thanks you so much

  • @Akwonnder_1
    @Akwonnder_1 7 месяцев назад

    Listening to u my spring just beat my a*

  • @TacosandRum
    @TacosandRum 4 года назад +2

    Tried this but the tension releases every time.. any tips

  • @moneraths
    @moneraths Год назад

    So on mine there is a tiny plastic piece that contacts the racheting mechanism that broke off. Without that piece it will not feed. The bullets just fall down into it. You can see the piece in talking about next to the spring. Just a little peg that sticks up from the base.

  • @mrkashis32
    @mrkashis32 4 года назад +4

    Bro thanks for explaining but you didn't show how to disassemble or reassemble the drum. Why!!!!!!

  • @brianreid2068
    @brianreid2068 11 месяцев назад

    Post how to fix the spring bro

  • @MonicaHolmes-g2m
    @MonicaHolmes-g2m Год назад

    how do you put the spring coil back on mines popped off

  • @crvon22s93
    @crvon22s93 5 лет назад +1

    Heyy I line mine up and put it back together but it seems to not have enough tension and the follower just drops into the mag??? Any idea on what it could be? Or should I just try to turn it more with more tension? thanks great video

    • @joshvee7672
      @joshvee7672  5 лет назад +1

      Mark De la rosa you might be spining it the wrong way not leaving tension brotha

  • @ChiraqInsight
    @ChiraqInsight Год назад

    Can you give any info on the screwdriver I need sheesh this video ain’t really no help

  • @40thaman
    @40thaman Год назад

    What screw driver do I have to purchase

  • @noahlewis2000
    @noahlewis2000 4 года назад

    Is there a shooting video of this? Any problems with the drum after the fix ?

  • @pablomoca
    @pablomoca 5 лет назад

    Did you have someone help you hold the spring down while you wound it up? Mine pops out every time I try to wind it up.

    • @joshvee7672
      @joshvee7672  5 лет назад +1

      pablomoca no the spring gets some tension when using the needle nose pliers and following these steps

  • @imravegod
    @imravegod 5 лет назад

    do you have ti wind up the big cog before reassembly?

    • @joshvee7672
      @joshvee7672  5 лет назад

      As long as its on that grove you wind it up with the sprocket cover that goes on top

    • @imravegod
      @imravegod 5 лет назад

      Joshua Velazquez I’m trying to understand but I can’t... is it in this video? Can you do another? My magazine follower has all kinds of slack I’m trying to get rid of.

  • @lvnorthend5941
    @lvnorthend5941 5 лет назад +1

    Every time I load mine all the bullets fly out what’ u think the problem is bro

    • @joshvee7672
      @joshvee7672  3 года назад

      Probably the wrong size caliber or to much tension

  • @HookahbrotherzTv
    @HookahbrotherzTv 2 года назад

    Bro mine got like 3 nines stuck in the drum and my bros flower stuck they completely shit

  • @morlanivey6619
    @morlanivey6619 3 года назад

    I’ve Taken All The Screws Out .. I Can’t Get Inside Though I’m Not Sure How To Open It After The Screws

    • @joshvee7672
      @joshvee7672  3 года назад

      Should come apart with small amount of pressure pulling away from each other

    • @ChiraqInsight
      @ChiraqInsight 2 года назад

      @@joshvee7672 what screwdriver do you use and what size? My bullets are lodged in here and I can’t get it out

  • @x5150xiBuLLeTz
    @x5150xiBuLLeTz 3 года назад

    I tried this and my mag still won’t work! Everytime I go to put ammo in the mag after attempting to fix it ! The ammo stays in the mag with no tension! I have made the tension tighter as well as use the needle nail pliers and nothing seems to help

    • @joshvee7672
      @joshvee7672  3 года назад +1

      Make sure your guide “bullets are not causing your issue

    • @joshvee7672
      @joshvee7672  3 года назад +1

      Also this spring is all your tension it’s a bit difficult but you will get it right trail and error

    • @x5150xiBuLLeTz
      @x5150xiBuLLeTz 3 года назад

      @@joshvee7672 okay thank you very much

  • @BigRome4ch
    @BigRome4ch 5 лет назад

    Aye brother my spring pop out of mines I can’t or don’t know how to put back in

    • @joshvee7672
      @joshvee7672  5 лет назад

      Big Rome you gotta line up the little notch on the tensioner wheel that goes on the spring with the L on the spring wind it up clock wise

    • @Nostagefright
      @Nostagefright Год назад

      ⁠@@joshvee7672wow is it really just that simple? It must’ve been an extreme waste of time having the part where you actually put the coil back on and turning it clockwise like you said, No wonder yours was already assembled and didn’t have to show us you struggling to put it on thank you 🙏 ❤️

  • @ygbang1
    @ygbang1 3 года назад +1

    It didn’t work smh, I’ll just stick to my 33 round mag

  • @BuhZingTV
    @BuhZingTV 4 года назад +1

    Anyone having feeding issues?

  • @checkinchicken1411
    @checkinchicken1411 4 года назад

    Hey man I have a clear 40. Drum the spring accidentally came off so I followed your video and put it back the followers goes up but the first one isn’t all the way up there how do I fix it?

    • @joshvee7672
      @joshvee7672  4 года назад +1

      CheckinchickenÆ 14 you gotta make sure your guides all the way up before you start winding it up sometimes it goes down while your winding it up

    • @checkinchicken1411
      @checkinchicken1411 4 года назад

      Joshua Velazquez wassup bro Im continuing to have problems with this mechanism when I loaded around 35-45 bullets the spring starts to get weak how can I fix this?

    • @joshvee7672
      @joshvee7672  4 года назад

      CheckinchickenÆ 14 not enough tension

  • @ghost-dz5ov
    @ghost-dz5ov 2 года назад

    Im getting fustrated with this shit😒

  • @Nostagefright
    @Nostagefright Год назад

    I’m trying so hard not to say there must be no one on earth who has a video of them actively in real time, no video cuts edits or any other bullshit, actually putting the spring back on because to be honest with you that’s the only reason we’re even looking for a video, the drum is not Rocket science it ain’t nothing to take apart honestly, the spring is the only thing pissing each and every one of us off 😃 but I’m satisfied to know that I’m not the only one who was sitting for 4+ hours trying to fix this abomination no matter how many different things I try and no matter how intensely I pay attention ………….somebody please help