How to install Courtesy Car Door Light (extensive tutorial)

This is the Courtesy car door light generic batdoor light. This is for the inside model of the car door light. Hope this helps, if you have any questions feel free to leave a comment below and make sure to like and subscribe!

[@TheBerkeleyBeauty]

I knew I’d be able to find a decent installation of these things on RUclips. Thank you.

[@gpasgrl1017]

After trying to translate the chinese thing I was like “Nope! RUclips don’t fail me!” And it didn’t

[@itscaitt_]

thank you so much for taking the time to make this! I got the projectors as a bday gift & the instructions made me so nervous that i’d screw it up. again, thank you!!

[@tanham007]

Thank you sooooo much! Those damn instructions on the back of that box were a BEAST!

[@pviguy227]

You have made those unintelligible, incoherent instructions on the box very understandable. Now I get it! Thanks very much for taking the time to explain.

[@christinahaggard3432]

You Sir, are a ROCK STAR! So "easy" once you understand the how! Great Job! :)

[@hawkshaw6533]

Dude trim
Ur fingernails!!!!!

[@joylitz2477]

I think I need to reinstall my magnet again after after watching this cuz 3 of 4 of my lights is not working…glad to see this video

[@champburroughs2980]

Good job my friend. No way I could read Chinese to figure this out

[@ava1274]

This tutorial is extremely helpful. Thanks so much! 😊

[@patriciabradley3681]

Thanks, bought a set for hubby and now know how to install.

[@ineedmystrength9405]

Didn't even get mine in the mail yet and I just felt I was going to need instructions thanks

[@carlotasblogsvlogspersonal6827]

It's a good thing I watched this video before I threw away the box because who knew the red cardboard was the glue ! Thank u.

[@MotoMiles]

My 3M didn’t stay . I lost both magnets . I heard gorilla glue or the double duct is decent . Best installation video I’ve seen on this.

[@BonChi66]

Thank you. Glad I checked out your video before attempting to install. No instructions on my purchase. Thanks again.

[@bipolartruth1027]

Mine didn’t even come with any instructions. Thank you so much.

[@josephteague1613]

Thank you! I was completely lost! My daughter is so happy!!

[@JMoonchild22]

Thank you!! Not only were the instructions GARBAGE, but I wasted at least an hour going through video after video..... I even searched the exact same product, and the product's website, to NO avail!! This makes perfect sense!! Thanks again! Cheers =}

[@fenrizblackheart6311]

Damn....glad I thought about seeking help at youtube hahaha...thanks bro

[@biancashouseofstyle3080]

Thank you so much! 😂 I was so confused trying to figure out what to do. New subscriber here just for this video being so helpful.

[@smokeys53]

Maaaaaaaaaaaaan thank you ,thank you , THE VIDEO IS A BLESSING . Now I'm smiling again .....

[@tickex]

So you did the hardest part really fast. I'm confused and just done with this magnet.

[@johnstanley7874]

Unfortunately the magnet doesn't work for me in a Mini Cooper 2016. I have put the light at the lowest point possible on the door, yet the gap where the magnet can be placed anywhere on the floor is still too big for the light sensor to go off.. it sucks..

[@dameitrusarrington9330]

Thanks, this was very helpful!

[@al_equis3747]

Bro been trying to figure this out so great job very simple and well explained only thing I’m gonna have to call Amazon like wth I only got one magnet

[@trishrandolph206]

Thank you so much these instructions were a scream , would never have worked it out Thanks Trish

[@almazamarripa3740]

“Thank You “ so much for this video!! It is so helpful 🙏🏼. Thanks for sharing 🙏🏼

[@BlackNatGeo]

Thank you. As you stated , the instructions printed on the box are a nightmare to understand. 👍🏾

[@princessjasmine8201]

Great tutorial. My amazon Mercedes Benz lights came with no instructions. 👍 major help! I’m putting them in tomorrow thanks to you lol

[@BRONCOIN718]

great video thankyou awesome job of explaining

[@officialari7794]

I was wondering can you use different type of magnets for it?

[@roseroseroserose6958]

Best demo. Thank you very much.

[@davideyes8589]

Nice one. Agree the instructions aren’t the best but your video was great many thanks

[@Kasey22]

😊😊thanks..I was wondering what the extra mag. Sticker was for.❤

[@Cloudlover23]

Wat website did u buy yours?

[@sinatra617]

I thought the projector was supposed do be on the door

[@GMB_SGW]

Thanks I'm gonna get 1 immediately 😊😊

[@robertgover3093]

thank you so much for this I have the same brand of lights and was wondering how to place these thanks again

[@terrantalsma8276]

Thanks I got them for my dad as a Father’s Day gift

[@josealcala172]

Thank you this was helpful

[@ggc4012]

It did help. Thank you. Directions on box were not very good.

[@HanaPawsLife]

Thanks for the video. I had a hell of a time installing mine in a Ford.. Lol! I also wish that it had a better mounting method as I don't feel very confident that this will stay in place for very long. I had to mount the magnet directly onto the carpeting. Like the light though. God Bless!

[@genesimmon1721]

Where can one get the Ford logo?

[@briangokey3302]

I don't see any magnets in any of the boxes? Were they packed inside in sight ? I ordered three boxes and cannot find the magnets. Can I substitute kitchen cabinet door magnets?

[@maemitchell8717]

Did you get an answer. I lost my magnets

[@retepvids]

I still need to help. Where does the magnet go. My box had no magnets. What kind should I get at Lowe’s or Home Depot

[@ByronForrest2010]

Great job. Thanks for putting this together.

[@NewYorksFinest1]

when i open my door the light comes on. sometimes after a few seconds the light turns off then i have to close the door and open it and it comes back on.. new batteries. is yours doing the same thing?

[@rickandkara]

Thanks very much for posting. Very helpful for VOLVO light.

[@petrazviklova2916]

Thank you very much ,,, reasonable instructions from start to finish

[@jonesgyamfi]

Thank you ur own is the best so far

[@morena0402]

Thank you. Because I don’t read Chinese. Great tutorial!

[@furqannazir2712]

this is what i looking for 😭😂 thanks for your information 🙏

[@mikuchancosplay4951]

Will it work on a Volkswagen Tiguan? I just recently bought mine for the first time and I’m curious if it will work on my car

[@victoriagadisch9048]

Thanks so much! Would have never figured it out myself! 👍

[@SavannaKreitner-vh8wp]

So I have an SUV and the magnet doesn’t reach the light on my door with how far up it is would a stronger magnet work?

[@NaomiBrew]

Thank you for posting this!!!!

[@badjohnson7079]

Do you know how to make the light stay on until u wanna turn it off

[@peter_knowz_lifting]

This video helped immensely. Thanks brother.

[@dmatrix606]

Very informative and helpful video... Thanks DIY

[@teresagargiullo9647]

Thank you very much that was very helpful 👏🏻👏🏻

[@Almighty7266]

What to do if magnet is not shutting off sensor

[@krystalmartin6824]

I have a 2020 nissan altima and the tape does not stick to my door. What other tape can I use?

[@Blue-moon12]

Thank you for this video. It was helpful

[@demetrouse2972]

Thank very much this is very helpful 😊

[@evielucas5847]

thanks! glad you posted this

[@jayosbeats313]

Does this leave a mark after it’s been on for a long time and u take it off worried about it leaving marks behind

[@demetriusdallas3555]

This is a must have for me

[@blackheart_gaming912]

Thanks man, this tutorial really helped me.

[@nickcassaday69]

Thank you for the demo. Unfortunately my box didn’t come with magnets 😭😭

[@innovation3176]

71 dislikes are from Superman fans
Great video 👌🏽

[@itsDjjayyArt]

Is there a way to turn off the dom lights on the side of the doors so the projecter could illuminate better

[@vincentjaoasuncion6397]

What of magnet is lost

[@WasserSquatch]

I just installed these ony wifes car the only difference is I put the magnet on the underside of the sill trim

[@dorissurratt8779]

I didn't receive magnets. Will it still work?

[@bruceanchell]

Very helpful! those instructions on the box are pretty bad

[@julierice9763]

Thank you SO much! This really helped!!!

[@missmoanypants]

I just bought the same Batman lights, but mine came with no instructions.

[@timvanmeter2068]

Thanks for posting the tutorial. Good job! As you said the instructions on the box made no sense whatsoever.

[@ptproductions3582]

“Stickys” lol 😊😆

[@OnlyGodCanJudgeMe8574]

Just got mines in 2day, Raiders logo 💪🏽🏈

[@BossLyfeTony]

Bishop Washington 😂 chiefs kingdom

[@Cloudlover23]

Wat website did u guys buy yours?

[@markusnepraunig8851]

Thanks guy! Good advice!

[@elusive1003]

Thank you! Appreciate the instruction!

[@antwoinesmith6616]

Thanks man. Very helpful

[@corryrust6455]

Thanks for the video, I appreciate it.

[@mrhawk1924]

Adhesive only works well Depending on your door quality.. I needed glue for my because of the plastic slick door.. paint the magnet to match your door.. i did.. covid-19 2020

[@wyterias6150]

Right when opening the door mine be off sometimes 😡

[@Hlomphomailula3245]

Thank you so much

[@bedstuyful]

thank u brother this help me alot

[@argonvalyn]

Thanks for the help!

[@AlwaysFallingFromTheRight...]

Thank you for this video

[@unnamed7570]

yeah man that tape does not work mine fell off within 1 day i used super glue and even a hot glue gun and it still fell off,

[@datdudebeasley]

You find a solution yet? I'm having similar problems getting mine to stick to door panel.

[@iceights7518]

Thanks for posting!!!!

[@Kobawsky]

Well, I just want a simple light, without any logo or magnets, it will be nice a small button switch that work just using the door pressure instead magnets

[@Alan-sb1hm]

appreciate the help my friend Wow!

[@simondaly7926]

Taking the light on n off the door does it leave damage ????

[@morganlind7379]

THANK YOU SO MUCH

[@dlynn61]

I'm trying to put these on my jeep wrangler. Finding the point where the magnet shuts off the light is virtually impossible even holding the light in my hand and using the magnet to shut it off. :(

[@MrJamessmall41]

Hey did u ever figure this out?, mine wont shut off with the magnet

[@brendajohnson7573]

I'm at the same point... think I need to raise up the magnet closer with some 2-sided foam tape...?

[@nyclady2003]

you rock THANK YOU!

[@jillmont3342]

What do u do with the charger

[@bkeny4798]

Why does one of mine keep flickering

[@Benjaminvazquez619]

Thanks bud

[@elmasanchez7686]

Thanks.

[@judebanacia7472]

Thanks bro

[@eldritchshiner]

Thanks!

[@thatsnotmyname8212]

Dude! Why are your nails so awesome!?

[@laceylloyd8148]

Thats not My name I scrolled through all the comments just to see if anyone was going to say anything about them talons 😂