Replacing Old Patio Door Lock

Поделиться
HTML-код
  • Опубликовано: 9 сен 2024
  • How to change an old mortise lock/handle patio door with new 2019 parts.
    These are the parts used:
    Prime-Line Products C 1225 Sliding Door Handle, Mortise Style, White:
    www.amazon.ca/...
    Prime-Line Products E 2014 Sliding Door Round Face Mortise Lock with 45-Degree Keyway:
    www.amazon.ca/...

Комментарии • 16

  • @karenbruce
    @karenbruce 4 месяца назад +1

    This was the perfect video - solved our problem of using a drill because the handle wouldn’t sit flush. Thank you!

    • @Mr.Fix_RC
      @Mr.Fix_RC  4 месяца назад

      Glad it helped……thanks for watching

  • @davidz4913
    @davidz4913 3 года назад +1

    Searched snd searched and lucky I found you . Same issue with screws too small. Thanks for the advice/information

    • @Mr.Fix_RC
      @Mr.Fix_RC  2 года назад +1

      Glad I could help! Thanks for watching!

  • @lindarosenthal6835
    @lindarosenthal6835 5 лет назад +3

    Thank you. I have to replace one like this on a rental this weekend. Your video really helped with instructions and problem solving. Thanks.

  • @jsantana3508
    @jsantana3508 2 года назад +1

    Helped me so much

  • @mohamedsheikh2502
    @mohamedsheikh2502 5 лет назад +2

    Great job , never give up ,I like that

    • @Mr.Fix_RC
      @Mr.Fix_RC  4 года назад +1

      mohamed sheikh thanks for watching!

  • @Susan-iw9gg
    @Susan-iw9gg Год назад

    Most replacement sliding door handles only come with 2 inch bolts that are too long. Go to a hardware store and buy the smallest washers: No. 6 Stainless. Two washers on the two bolts should secure the inside and outside doors flush to the door frame.

    • @Mr.Fix_RC
      @Mr.Fix_RC  Год назад

      There are a few ways to make this work but just make sure that everything is tight. Thanks for watching!!!!

  • @squizzerl1478
    @squizzerl1478 3 года назад

    How do I fix the handle if the screw holes are blown out and the handle fell off because of it?

    • @Mr.Fix_RC
      @Mr.Fix_RC  3 года назад

      If the threads are stripped, you can try using bigger screws and forcing it but I would recommend a new handle. Thanks for watching!

  • @maryroux3461
    @maryroux3461 4 года назад

    My door is locked and I can't get it unlocked. I took the handles off, and have tried to jiggle the lock with a screwdriver, but I still can't get it unlocked! I need to be able to open it!

    • @Mr.Fix_RC
      @Mr.Fix_RC  4 года назад

      Mary Roux you should be able to unlock it by using a screwdriver, I’d keep trying that. If that does not work try to reattach the handle and attempt to unlock it that way. Good luck!

    • @maryroux3461
      @maryroux3461 4 года назад

      @@Mr.Fix_RC I did manage to get it unlocked by spraying everything down good with WD40, so it's fixed as well as I can fix it myself. I'll use boards to keep it shut from now on.

  • @markallen8132
    @markallen8132 2 года назад

    So..... the moral, is don't buy cheap stuff?? Good video though, Thanks.