I think the non rgb fans case version for 70$ (here in europe) is a good and fair price for installing your own liked rgb fans like arctic p12 argb. I would build 3x 140 at the front, 2x 120mm on the left, a 360mm on the top and a 1x 120mm on the back.
One question please, I don't know if you have heard about the new PSU from Corsair, the shift series that have the cables to one side, the thing is that they say that the case must have a minimum width of 210 mm, I know that this model does comply, but in your experience you see that the back cover is very tight or glued to the source... because I think it should at least measure more than 5 cm, so that the cables can bend and go up or go to one side.
Wow i haven’t seen those power supplies before. There was a decent amount of cable management room so you should be fine. Not sure though I obviously don’t have the PSU in my possession to see
thanks for the review, i havent found many people talking about this case even though it seems incredibly good for the price but just some tips to make the videos a bit more enjoyable to watch is dial down the rgb lighting in the video, it adds a blurry reflection of the rgb lights making the video quality look lower and also just raise the volume of the video when you upload as even on full volume its fairly quiet. Also cant you just remove the yellow gamdias thing? theres not really any point in having it in right?
I just bought the P1 case yesterday, I couldn't get the ARGB fans to sync with my MSI motherboard, it has 2 argb headers. And that yellow bar didn't work out for me either. Please let me know if you manage to sync the ARGB case fans.
The rear fan has an argb conector, if you hold the rgb button on the case it pases from its own control to the rgb sirgnal from the cable.
Didn't know this!
I think the non rgb fans case version for 70$ (here in europe) is a good and fair price for installing your own liked rgb fans like arctic p12 argb. I would build 3x 140 at the front, 2x 120mm on the left, a 360mm on the top and a 1x 120mm on the back.
Very useful video, thank you very much :)
One question please, I don't know if you have heard about the new PSU from Corsair, the shift series that have the cables to one side, the thing is that they say that the case must have a minimum width of 210 mm, I know that this model does comply, but in your experience you see that the back cover is very tight or glued to the source... because I think it should at least measure more than 5 cm, so that the cables can bend and go up or go to one side.
Wow i haven’t seen those power supplies before. There was a decent amount of cable management room so you should be fine. Not sure though I obviously don’t have the PSU in my possession to see
where can i get a hub like that to controll my fans cus i also have a athena p1
Nice video
One question, Can the RGB bar be turned off or is it always on?
thanks for the review, i havent found many people talking about this case even though it seems incredibly good for the price but just some tips to make the videos a bit more enjoyable to watch is dial down the rgb lighting in the video, it adds a blurry reflection of the rgb lights making the video quality look lower and also just raise the volume of the video when you upload as even on full volume its fairly quiet. Also cant you just remove the yellow gamdias thing? theres not really any point in having it in right?
You can remove it yes. It technically hides the cable management holes and makes the inside of the build look a bit cleaner
I just bought the P1 case yesterday, I couldn't get the ARGB fans to sync with my MSI motherboard, it has 2 argb headers. And that yellow bar didn't work out for me either. Please let me know if you manage to sync the ARGB case fans.
Will let you know. Seems like it’s a universal problem since it happened to you too. We’re talking to the Gamdias representatives about it
I am relieved to tell you it was the sata power connector of the rear fan just loose.
Hi, I bought this case yesterday and can't able to control argb with my msi pro z790 p motherboard (using mystic light ). Is there any way to do?
@@SathishKumar-bw1ic i am having the same problem with a b550 msi motherboard
what is the best PC case at this price range?
Join our discord with the link in the description and ask for your price range, we'll help you out
What is the price bro
The front looks kinda cheap
Yams da 🐐
tml is the goat
nice video
Yams is the goat