Видео

What a bargain, cool build

@@generationxpvp hi mate, ty for your comment! yeah, it really is, and the condition is mint! I am here in germany and many people drop hardware like crazy, its really easy here these days to get a pc for cheap! where are you from?

bruh

@@pcflippingcentral 😇🤣

What's wrong with the RTX 4060? I got it for $230 which is a pretty sweet deal for how new it is and how well it performs :)

@@pcflippingcentral Well im not the best with pcs but a lot of people said its one of the worst gpu

@@TheOfficialSparksnothing wrong with a 4060 the price per performance is the only issue. still a good card

@@pcflippingcentraljust use the 6650xt the 4060 is hella overpriced tbh

@@TheOfficialSparks It's a good card it was just very hated when it came out because it was priced very high

From trash to treasure! Sweet build!

I love aliexpress combos

The power supply is a nice unit. It's either tier B or A on the LTT PSU tier list (I don't remember exactly which tier). Also, you're right about the SSD and 4060. As I always say: there's no bad parts, only bad prices. Most people hated on the 4060 because of its price.

@@AntoniohitsHRs RTX 4060 will give you a better performance gain. I will say, though, that the jump from a 2060 super to a 4060 actually isn’t that big of a performance gain. If I were you I’d save for something better like a 4070 or just wait until you can upgrade your computer entirely :)

@ ok tysm for the answer

damn, i have the exact situation, but my cpu is ryzen 5 5600.

Based on videos I have watched, the 2060 should be more than capable of giving you, easily, 3 digit number FPS at 1080p and performance settings. Do you really need a 4060?

@@TrusteftTech my 2060 super is at 100% usage on the finals, while my ryzen 5 5600 is around 40-60%, i assume it's gpu bottleneck, and the settings i use are lowest setting no RT, and using dlss balanced still not reduce the gpu usage it is playable, i got around 60-80 fps, however it's kinda hard to me for aim tracking especially for fast paced shooter.

Not sure what you mean by that

@@pcflippingcentral it means was the cable and powering already in when you brought the computer

@@faboii56 this is just a case, not a whole computer

@@pcflippingcentral so it's custom made

@@faboii56 sure i guess

ARGB

@@pcflippingcentral thanks!

@@happyputt9709 I have always just made my bootable USB directly from the Microsoft website. I also believe that windows 11 requires the OS drive to be formatted as GPT

@@pcflippingcentral Thanks for the reply. Will look into it.

@@Aexibexi629 there’s lots of websites out there. You can get it officially from the Microsoft store or from alternative sites. Check out the RUclips channel Tech Yes City, he has a sponsorship with a website that sells windows keys at a discounted rate.

Yes. You can copy your windows 10 key (as long as it is a retail key and not an OEM key). I usually use windows 10 pro retail keys to activate my windows 11 pro computers!

Windows 11 will run great on your system. Your CPU is still plenty powerful in my opinion and you have sufficient RAM. I'd say go for it! Also, good to see you again and I'm glad I could fulfill your video request :)

@@pcflippingcentral How about the "Windows Update"? Will it be fine? If so, i will upgraded it on holiday, December. As I need the pc to write a total of 35 pages of articles

@@tsstore-f1b should be fine. There might be problems trying to update windows but if there is you can always stay on the previous windows 11 version

i hate youtube. I already type a long paragraph. but i dont think it sent

Hey sorry for the late response! I'd first check to make sure your RAM sticks are in the right slots (slot 2 and 4). You also have to be careful with these OEM motherboards as sometimes they don't support every stick of ram, I usually only go with universal brands like kingston or samsung. It's also possible something is DOA

@@pcflippingcentral same frequency ram..I don't know what that 1Rx8 means..I brought normal pc DDR3 ram..

why so? In this video I used it on an AM4 motherboard and although the Ryzen 1600 is a relatively low powered chip the cooler performed well

Join our discord with the link in the description and ask for your price range, we'll help you out

I believe you can and it will just be controlled by a button on the case, however it's been two years since I've had this product I don't really remember for sure

Why do you say that? I was about to buy it

@@javierflipper2524 Look, I bought mine 5 months ago, and recently the coolerfan that is behind the display broke, making a very loud noise and possibly damaging it even more because the fan kept spinning off-axis. So I activated the warranty at the store where I bought it. 1 month later the other one arrived and thanks to the warranty I didn't have to bear any losses, but this other one after being installed came with channel 3 and fan3 not working, apparently shorted... because I couldn't control the speed that was at maximum when all 3 were connected. Anyway, another problem, and I activated the warranty again... and until now I'm without a computer. But I don't care about that anymore... I became a hippie, and I'm going to become president of Guatemala. :/ That's what I'm left with.

@@masklask4444 yes you’ll just need to connect the fans to your motherboard using the ARGB connector

@@RealLandonFisher they’re standard

@@pcflippingcentral i figured it out mb

It's been about 2 years since I had this case. I believe you pull the whole front panel off like normal by pulling on the bottom of the panel. You might want to consult the manual or find some other review about it to confirm, though. BTW love the profile picture 😁

@@JuanGonzalez-hv6vs modular PSU sounds like a waste of money. Considering something for maybe $150 there would probably be room for a PSU upgrade to a 450w+ decent unit and an upgrade to probably an RX 570. Could also try looking for a 4c8t CPU

I mentioned the modular PSU because cable management would be a little easier. There's no room for cable management, but it would be better because there would be less cable to deal with.

@@JuanGonzalez-hv6vs I see what you mean, but with something of this caliber it's better to allocate more budget to performance rather than nicer cable management especially when it doesn't have a transparent side panel

Find a GTX 1650 or RX 6400 for a decent price. Otherwise upgrade the power supply and you can slap something like an RX 6600 in there for some awesome performance. Join our discord and send some more info, we can help you out!

Hey mate I also picked up an optiplex 5050 mt with the i7 7700, I swapped the case out as like you said no space for cables. I used a 600watt corsair sf600 fully modular psu and literally just finished the build with a 3060 12gb. It's for my sons 1st pc and it runs fortnight very high settings @1440 average of 90fps.. with dlss enabled its maxing out my 144hz monitor

@@evil-scotsman335 hey man thanks for the suggestion. I'll try copying what you did. Also did you have to change the motherboard or use any sort of adapters for the gpu? I'm new to pc building so I'm not sure.

@@tecnoticboy4479 hello mate , I used the motherboard, cpu , 8gb ram , and 120gb ssd that came with the original optiplex.. Things I added were. 600watt corsair sf600 psu 500gb nvme for storage Rtx 3060 12gb. I used a micro atx case " the stanoffs don't all line up as dell motherboard uses a weird layout. I was able to get 2 screws in which holds just fine. I also added a coolmoon argb controller and a bunch of fans to the case. The optiplex only cost £100 I got lucky with the ram and psu on marketplace for cheap. £45 for both. New case was £50 Controller and extra fans £40 Gpu £230 All in around £460.. it was a cool project. And I will also be able to upgrade him to AM4 platform later in the summer with just a new motherboard and cpu.. If you only want to add a gpu to your current system go for one that doesn't require a psu and can run off the motherboard power.. rtx 3050 6gb low profile is what I was originally gonna do. But when I ran into the cable management problem I decided to swap the case and also the gpu.. Good luck bro 💪🏼 Edit: I had to buy a 24 to 6 pin adapter for the motherboard. That was the only adapter I'm using.

@@tecnoticboy4479 ruclips.net/user/shortsdX8I5neBB2o?si=weGuTtQg34AGbs4U

The xeons are awesome! Their single core speeds kind of suck but multi-core is great. I recently did a bunch of builds with E5-2650 V4's and GTX 970's that perform awesome and built the whole system fully custom for under $220

MSI Afterburner with Rivatuner!

@@pcflippingcentral thank you!!!

Totally, that's why I'm going to be throwing in a spare 750 Ti before I sell this one (at an extremely low cost obviously) and I have now paired this RX 560 with an i7-4770 which performs pretty nicely in games!

SFF GTX 1650 could work in there for the right price!

🔥

You have to follow the order of fans that the hub shows, so plug your first fan into slot one, second into slot two and so on. They can't be connected all willy nilly

if its just your bios showing 0 rpm though but the fans are still spinning there may not be anything you can do