For anyone having trouble with getting the distribution to show up you need to change the pole number and max voltage manually in the stock Revit panel family by adding a parameter to each inside the family.
@@AngadTiwari-sb3ih Add Family Parameter to panel > Name - Electrical Potential > Discipline : Electrical > Data Type : Electrical Potential > Select Group as you want > Type in Voltage to match project Add Family Parameter to panel > Name - Number of Poles > Discipline : Electrical > Data Type : Number of Poles > Select Group as you want > Type in Number of Poles to match project This worked for me. Good Luck
when i click the drop down button for my panel. all there is or appears is ''none''. I have done my MEP settings but none shows for my single panel and i cant move forward. Please help with possible solutions
Great video however I have followed your steps one by one ne I still get none for the panel distribution system. Is there something that I am missing? I am using REVIT 2021. Any help would be appreciated
Hello sir please I followed your video but I was only able to assign one distribution system to only one panel.i have More than one panel board in my design.so I'm only able to create a circuit only with one panel.sir please help me out on how to assign to the other panels
![Twenty One Pilots - “The Line” (from Arcane Season 2) [Official Music Video]](http://i.ytimg.com/vi/E2Rj2gQAyPA/mqdefault.jpg)
For anyone having trouble with getting the distribution to show up you need to change the pole number and max voltage manually in the stock Revit panel family by adding a parameter to each inside the family.
OKay how exaclty this is done hehe
LIke what should be the setting for it
@@AngadTiwari-sb3ih
Add Family Parameter to panel > Name - Electrical Potential > Discipline : Electrical > Data Type : Electrical Potential > Select Group as you want > Type in Voltage to match project
Add Family Parameter to panel > Name - Number of Poles > Discipline : Electrical > Data Type : Number of Poles > Select Group as you want > Type in Number of Poles to match project
This worked for me. Good Luck
when i click the drop down button for my panel. all there is or appears is ''none''. I have done my MEP settings but none shows for my single panel and i cant move forward. Please help with possible solutions
Great video however I have followed your steps one by one ne I still get none for the panel distribution system. Is there something that I am missing? I am using REVIT 2021. Any help would be appreciated
It is not working I cant see the distribution system on my panel board. :(
Excellent shown and narrated! Keep it up.
Thank you for your video. I have got lots of knowledge in this video.
Very helpful video. Thanks.
very nice
Sir, I carefully followed your instructions, and yet the "Distribution System" is still showing none only.
To make it work you gotta change the wire settings to 2 instead of 3. That worked for me.
thanks man! worked@@arickdyrdal4205
How?@@arickdyrdal4205
Very good , hey friend where are you from ? US? Uk ?
even after changing the distribution system into 120/240... my panel board did not show when i was about to connect the Outlets.....what to do?
It is really very helpful thank you .
What software is it?
Very nice
Thanks Very much
Hello sir please I followed your video but I was only able to assign one distribution system to only one panel.i have More than one panel board in my design.so I'm only able to create a circuit only with one panel.sir please help me out on how to assign to the other panels
Hello,
I have a three-phase circuit divided into 3 lines (6, 7, 8), I want it on one line (R, S, T).
linia numarul 6
line number 6
Attach the files used in this video in the description
what your work-around is doing is changing the number of wires from 2 - 3 ...
how?
You miss the fix for 240V outlets and a real residential 2 phase + G panel. your set up do not works as real one does