It does sounds amazing… the terrible video I made doesn’t do justice of the sound… people keep hating on the exhaust, but I don’t pay no mind to it. Just hating because they can’t get one or they can’t afford it…. 😂😂😂😂
Hello mate, the bike looks tremendous, very cool. Loving the exhaust too! I was wondering where you got the swing-arm covers from, they look really nice?
Honestly don't want to knock the exhaust but it sounds identical to running no exhaust. I tried it on my RSV4 (because why not right) before I installed my Leo Vince LV10. Just my two cents.
Sounds and looks great! Did you install a Servo Eliminator or do an ecu change? I wonder if maybe it’s possible to install just the slip on without any more fuss... 😅
I installed the Gabro tuning (basically ECU flash) if you don’t either install a servo buddy or flash it, then the bike it’s not going to run properly and you will get error codes…
@@maldole8522 that's so wrong buddy, if u completly change the entire exhaust YES that will happen if u dont flash it. but with just an slip-on, it will have litterly no effects on the bike, i done slip-on on several on my bikes and what u just said there is not the case! and the enige light will def not be on the display doe!
the whole problem comes when u remove the CAT! that is why u need to ECU flash the bike and thats when the problems comes if u don't do it! but it doesn't affect the bike with just an slip-on when the CAT is there.
Looks nice and slick other than those useless stickers all over the swing arm but I guess . I’m thinking about this exhaust system looks good and sounds amazing.
Y this where I got mines. www.666carbon.com/en/copri-forcellone-carbonio-autoclave/38034-carbon-fiber-twill-200-rear-swingarm-cover-aprilia-rsv4-1100-tuono-1100-2021-2022.html
The rear rotor and consider “Racing rotors” minimizing the amount of weight in comparison to the OEM factory rotors. They give you better performance decimating the amount of heat on the rear
Hey man. Here’s a link where you could get the rearset. I had the dealer installed these for me. I’m sure it’s pretty straight forward on the installation…. In regards to the brake switch, since it’s considered a “Racing aftermarket part” it will not come with a brake switch… I tried getting one, but I was not able to find one that was compatible with these rearset. In my state there no inspections so I don’t have to pass any required inspections like in most states in the US … hope this helps. Let me know if you have any other questions. Ride safe! www.hsbkracing.com/parts-and-apparel/aprilia/rsv4/brake-clutch-controls/rearsets-pegs/spider-aprilia-rsv4-tuono-v4-billet-adjustable-rearset-2017-and-up/
These are the rear rotors I have. Hope this helps! 👍🏼 www.hsbkracing.com/parts-and-apparel/aprilia/rsv4/brake-clutch-controls/brake-rotors/aprilia-rsv4-09-22-tuono-v4-12-22-race-track-lightweight-rear-brake-rotor/
I have waited over 3 months to hear this I bought a 2014 HP4 recently and put a CRT exhaust on it by sc project Sounds fucking mint But I want something even louder and more ferricious.. How much louder is this than say a bmw with a crt? Like 10% louder? Can we get a ride pass video or more video pleases as going to sell my cbr650r and hp4 to buy a RSV4 now
Definitely louder… it’s basically a straight pipe. It doesn’t have any mesh that would filter the sound of the v4. It has more of a deeper sound that the CRT… I know because I currently still have the CRT just in case I didn’t like the GP-22
My favourite motorcycle but damn Aprilia It's not performing well in India They sell their scooty only not big bikes That's why Ducatis are largely selling
@@manavbetkiker3642 only 4 or maximum 6 v4 available in India 1st is John abhraham 2nd only Maharashtra has Aprilia's big bike service store So how can you say they sell?? Go check Aprilia india website they removed their superbikes from their site
My mistake man. Got my bikes confused. This one actually has the stock rear sprocket at 45 T and the front sprocket I went down 2 teeth at 14 T. You will lose some top end speed but you will gain more torque coming off the Conners.
rear brakes aren't needed technically, there are there to help maneuver in slow speed turns, engine braking helps for braking too, also most importantly, weight shifts forward during braking so front brakes are more important
Sorry but I don’t like the exhaust !! Absolutely doesn’t do that beautiful v4 any justice at all ! Uch! Absolutely stunning bike though Be nicer sound with a nice stumpy Akrapolvic 👍❤️
Hey quick question. I have the 20 rsv4. With the AR GP1 r I know the short cans have not a lot of internals. The AR has some though baffle and such. Does this pipe have any exhaust internal. Or is it just a open can. Sounds like a open can ? Nice bike btw
Recorded horrendously... but amazing sound nonetheless. NEED this in my life.
That thing looks criminally good
Sounds so menacing 🤤 gotta love SC.
It does sounds amazing… the terrible video I made doesn’t do justice of the sound… people keep hating on the exhaust, but I don’t pay no mind to it. Just hating because they can’t get one or they can’t afford it…. 😂😂😂😂
Videos never do them justice. But yea man, everyone always hates because they go out & buy the same gsxr everyone else does 😂.
@@ChrisAceRsv4 😂😂😂 absolutely right on the money 💰
@@maldole8522 Would you db test it sir sooner?
Hello mate, the bike looks tremendous, very cool. Loving the exhaust too! I was wondering where you got the swing-arm covers from, they look really nice?
www.666carbon.com/en/copri-forcellone-carbonio-autoclave/38034-carbon-fiber-twill-200-rear-swingarm-cover-aprilia-rsv4-1100-tuono-1100-2021-2022.html
anything with a honey comb design just oozes moto gp to me, sounds sick, good choice!
This looks like it will melt your boots. Or maybe the angle of the mesh prevents that? Looks sketchy :D
He's not bothered if it does melt his boots . If he can afford $2200 for a slip on he can certainly afford new boots every time he goes out on it 😘😜
Exhaust it’s just fine man. No bother at all. You do feel the backfire during the quick shift
That thing comes from gp racing bro it’s not sketchy at ALL
if you are a squid like me that will just burn the skin right off my ankle, i dont wear pants or boots haha
It sits slightly behind where the boot sits on the rear set
Nice bike and exhaust.
Looks insane, I don’t like that “blarfy” sound like there’s no exhaust at all. To each their own of course! Enjoy!
Naldo, is that just a slip on exhaust. Great sound and the look is perfect.
Yes, correct
Honestly don't want to knock the exhaust but it sounds identical to running no exhaust. I tried it on my RSV4 (because why not right) before I installed my Leo Vince LV10. Just my two cents.
This looks great for me
Thanks but man if youre gonna film wide screen make sure the phone in horizontal, its weird to watch. And how the heck you dont rev it for us!!!!? 😭
MOTOGP SOUND. 🔥
PLEASE GIVE US MORE CONTENT!!!!!!
Landscape mode, bro
That bike sounds dangerous
awwww come-on man! give it some revs!
So AMAZING🤩🤩🤩🤤
Sounds like a straight pipe… does it have any baffles on it or just an empty shape cone !!!
we need some rev sounds next
Sounds and looks great!
Did you install a Servo Eliminator or do an ecu
change?
I wonder if maybe it’s possible to install just the slip on without any more fuss... 😅
I installed the Gabro tuning (basically ECU flash) if you don’t either install a servo buddy or flash it, then the bike it’s not going to run properly and you will get error codes…
u don't need to flash or use a servobuddy if u just getting a slip-on. if u change the whole exhaust system then yes.
@@markus7069 if you don’t mind riding with “Engine check light” and an under performing bike, then yes, you don’t need a flash nor a servo buddy.
@@maldole8522 that's so wrong buddy, if u completly change the entire exhaust YES that will happen if u dont flash it. but with just an slip-on, it will have litterly no effects on the bike, i done slip-on on several on my bikes and what u just said there is not the case! and the enige light will def not be on the display doe!
the whole problem comes when u remove the CAT! that is why u need to ECU flash the bike and thats when the problems comes if u don't do it! but it doesn't affect the bike with just an slip-on when the CAT is there.
Omg this sound power
Any issues with the bike since you got it. Am planning to get one.
How are you enjoying the bike thus far?
The bike is beat… so far no problems. It gets pretty hot during the summer months but engine ice solve the heating problem. It roar like a 🦁.. 🥰🥰🥰
Hi, where can I buy this exhaust? Searched everywhere but can't find
Lol.. why bother. Just let it dump from the collector at this point.
Next flyby video 💪💪👍🇮🇹
In the process of doing a flyby 👍🏽👍🏽👍🏽
Your gonna want to go riding for no reason at all. Lol.... enjoy
I put AR GP1 on my 22' rsv4...took about 3.5months to arrive
Thank you brotha. Enjoy your new AR GP1 !! This one took about 5 months until I got it… lol. Safe riding !
Looks nice and slick other than those useless stickers all over the swing arm but I guess . I’m thinking about this exhaust system looks good and sounds amazing.
I’ve been looking for a good carbon swingarm cover for mine, which do you have?
Y this where I got mines. www.666carbon.com/en/copri-forcellone-carbonio-autoclave/38034-carbon-fiber-twill-200-rear-swingarm-cover-aprilia-rsv4-1100-tuono-1100-2021-2022.html
Does it pop & crackle ?
❤this exhaust waited months to see it, I have tuono v4 2020 wondered if it would fit, but check it's an expensive piece of pipe
Don’t think it would fit the 20 Tuono at this point. 😢
This is for 2021 and up only. This is fitted to the new swingarm.
It looks like the akrapovic for motogp suzuki
For sure you can't ride it with your slipper HAHAHA. Btw it sound awesome
Hey bro sounds awesome. But why is the rear disk like that?
The rear rotor and consider “Racing rotors” minimizing the amount of weight in comparison to the OEM factory rotors. They give you better performance decimating the amount of heat on the rear
@@maldole8522 ahhhh awesome bro! But does it overall decrease the braking power considering the much lesser contact patch with the pads.
@@cheyannno123 nah brotha. Not at all… they’re amazing…! I would say, better than the oem’s.
It would be soooooooo much better if it was a dual exhaust with one on each side of the bike with the same overall design
Hey where did you pick up your rearsets and how bad was the install? Do you need anything for the brake light switch?
Hey man. Here’s a link where you could get the rearset. I had the dealer installed these for me. I’m sure it’s pretty straight forward on the installation…. In regards to the brake switch, since it’s considered a “Racing aftermarket part” it will not come with a brake switch… I tried getting one, but I was not able to find one that was compatible with these rearset. In my state there no inspections so I don’t have to pass any required inspections like in most states in the US … hope this helps. Let me know if you have any other questions. Ride safe! www.hsbkracing.com/parts-and-apparel/aprilia/rsv4/brake-clutch-controls/rearsets-pegs/spider-aprilia-rsv4-tuono-v4-billet-adjustable-rearset-2017-and-up/
@@maldole8522 Thanks man, will do. Been wanting to pick up those spider rearsets for my Tuono.
Hey brother, I have a question ¿Is that a special type of rear brake disc you have?
These are the rear rotors I have. Hope this helps! 👍🏼 www.hsbkracing.com/parts-and-apparel/aprilia/rsv4/brake-clutch-controls/brake-rotors/aprilia-rsv4-09-22-tuono-v4-12-22-race-track-lightweight-rear-brake-rotor/
@@maldole8522 I appreciate it! You have a very nice motorcycle. Take care.
@@4evershoot Thank you brotha. I will be doing some better videos on the bike coming soon ! Definitely a fly-by.. 😁😁😁😁
I have waited over 3 months to hear this
I bought a 2014 HP4 recently and put a CRT exhaust on it by sc project
Sounds fucking mint
But I want something even louder and more ferricious..
How much louder is this than say a bmw with a crt?
Like 10% louder?
Can we get a ride pass video or more video pleases as going to sell my cbr650r and hp4 to buy a RSV4 now
Definitely louder… it’s basically a straight pipe. It doesn’t have any mesh that would filter the sound of the v4. It has more of a deeper sound that the CRT… I know because I currently still have the CRT just in case I didn’t like the GP-22
@@maldole8522 guaranteed there wouldn't be a louder bike at Any bike meet you rock up too..
It's fukin loud bro 🤜
is that compatible on panigale v4?
Is this full exhaust?
My favourite motorcycle but damn Aprilia
It's not performing well in India
They sell their scooty only not big bikes
That's why Ducatis are largely selling
Na they sell rsv4 but their service backup is gonna make you cry
@@manavbetkiker3642 only 4 or maximum 6 v4 available in India
1st is John abhraham
2nd only Maharashtra has Aprilia's big bike service store
So how can you say they sell??
Go check Aprilia india website they removed their superbikes from their site
Ha ha sounds like a 125 with a straight through exhaust
Do i see a carbon fiber swing arm???
what is this rear break ?? wtf
is this a full exhaust and is the ecu stock or flashed?
No it's a slip on. You don't need a full exhaust because the cats aren't welded to the headers. And he commented that its flashed
😱
Hello..can you tell me what number teeth is your front and rear sprocket?? Thanks
The gearing on the bike is -1 front and -2 rear sprockets
@Maldo LE 15 front and 39 rear?? I dont found this sprocket (afam)
@Maldo LE hello if you want can help me?? The rear sprocket is 39 or 43?? Thanks
My mistake man. Got my bikes confused. This one actually has the stock rear sprocket at 45 T and the front sprocket I went down 2 teeth at 14 T. You will lose some top end speed but you will gain more torque coming off the Conners.
Coud you tell me where did you buy that exhaust Pleasee
Hey, got it at CBC Motorsport.
camera roll
exhaust costs more than my bike 💀
Melt your shoe yet😂
that back brake aint even going to work
😂
rear brakes aren't needed technically, there are there to help maneuver in slow speed turns, engine braking helps for braking too, also most importantly, weight shifts forward during braking so front brakes are more important
You laugh. What remains of that rear disc will still lock the rear tire up without the slightest hesitation
Public reaction videos
🙉
😂 szczerze zero znajomości
Sorry but I don’t like the exhaust !! Absolutely doesn’t do that beautiful v4 any justice at all ! Uch! Absolutely stunning bike though
Be nicer sound with a nice stumpy Akrapolvic 👍❤️
Way too loud imo
Bruh, where did you get the rear Brembo tire cover? Link please.
Hey quick question. I have the 20 rsv4. With the AR GP1 r I know the short cans have not a lot of internals. The AR has some though baffle and such. Does this pipe have any exhaust internal. Or is it just a open can. Sounds like a open can ? Nice bike btw
It’s open.
Do you plan on posting any riding videos?
What’s your instagram?