Installing a Supreme Suspension Lift Kit on my 2004 Expedition
HTML-код
- Опубликовано: 8 мар 2021
- As far as $500 beaters go, Ole Mossey has never let me down. Being that its only 2wd, i had slammed it out with some coil overs, and made a short burnout video with it that has gotten next to no views. Mossey deserves better than that lmao. Let me know in the comments if you like this kind of video. And if ya do, please get subscribed!! As always, Thanks for watching. Badger Out
The increases in the back, as they are, are equal to those in the front.
Definitely gave it attitude after altitude!
You have install videos of your exhaust if you don’t can you add some and part numbers links please .tks
Unfortunately I did the exhaust before I started the channel. They are some eBay full length headers for a sn95 mustang. I removed the rear hitch and put a single in dual out muffler in its place. Id do a in depth video if I still owned it, unfortunately I sold it a couple months back 😭
Hell yeah. This video was sweet
Thanks man! Much appreciated
What’s a good offset? I’m saving up to do the same with my ‘03 Expedition
Unfortunately I don't know exactly what offset those wheels are. But, if you look up the difference between positive and negative offset on like Google, it will explain which is which and how to determine what would work best for you
What Springs or coilover did it have back then to have that drop ?
The cheapest you can get your hands on. Maxspeedingrods coil overs off ebay
Just bought one of these things. How'd you get your black plastic trim lookin good?
All I did is clean and degreased them and gave em a couple coats of matte black. It was all faded and splotchy when I first got it like 3 years ago lol
@@BadgerBuilt for sure thanks
Our expeditions don’t get enough love and if they do it’s old ass vids bro keep pushing out content 💯
You have exhaust videos of install yours sounds great
I never quite got why people always wanna fuck with Yukons, Tahoes, suburban and such. Don't see to many Ford Expeditions lifted
I found that the rear was more of a pain in the ass, front went smooth for me
I hear ya man, Notice how there isn't much footage of us doing the rear 🤣 We struggled as well.
-also Headers…you should put some headers on the Expedition.. I need a video to refer back to…my ‘03 Expedition is my first project ride
I had put full length headers on it when I pulled the motor to replace it. HUGE pain in the ass. Especially if yours if 4x4, I highly recommend shorty headers
I installed the kit and now my steering is wobbling, any ideas of what I could have done wrong? I installed new struts, lower ball joints, tie rods and ties rod ends. Any help would be greatly appreciated at this point bc I can’t figure out what is causing this.
Have you had an alignment done on it yet??
If not that would be where you have to start. As long as there is no other worn suspension components you should be golden after you get an alignment 👌
Had an alignment done yesterday, it was wobbling before and after the alignment. Unlike your install the only thing I did differently was replace the struts with new ones and the other parts listed above were replaced. This is very frustrating lol
Also mine in an 05 Expy Eddie Bauer 4WD, not sure if that would make a difference or not
@@joshuadesantis5954 makes me wonder if there isn't something else worn our loose. I wish we lived closer man, I'd drive over and get it figured out for you.
I need this
Nice bro how many inches was the rear
Thanks man! It was 2.5" in the rear and 3" in the front.
Are those rim's 22s or 24s?
20s
what kinda struts are you sing?
Monroe factory replacements
What drop was it on ?
Maxspeeding rods coil overs. Cheap, rode rough, but looked good doing it lol. I think I only paid like $250 for all 4 new
What tire size do you have ? 35s or 33s?
33s, I did put 35s on but had to do some trimming. Id recommend 33s unless your also doing a body lift
@@BadgerBuilt i also installed a body lift and trimmed a bit for the 33s. Would I need to trim more for the 35s?
@@EdxGamingx If you had to trim for 33s, maybe. Depends on your wheel offset
@@BadgerBuilt true, i do have some wheel spacers as well. Maybe that’s why I had to trim. Thank you for the info! Love what u did with the expy 👍🏼
@@EdxGamingx No thank you for watching man 💯 Every view and sub counts! I'm always happy to help when I can
She’s a beast
Thanks man!
@@BadgerBuilt did you ever have to upgrade the upper control arms
@@bryanmesser7098 I did not. If I went any bigger I would have needed to
Do you have the link to the blocks ?
It was all part of the kit, found on ebay
@@BadgerBuilt is it a 3.5 or 3 inch ?
@el.cartelgaming2417 I believe it was 3.5 in the rear and 3 in the front, or vice versa. It's been like 4 years, I done smoked most my memory away 😅
@@BadgerBuilt for expedition correct not f150
@@el.cartelgaming2417 correct
How high are you sitting ?
Cleared 35s with some slight bumper trimming
There’s a truck like this in Michigan I swear I thought it was y’all
It's still in lower Michigan, new owner drives it all the time
👌🏻💯💯💯💯🔥🔥🔥🔥