How to get UHD 4K 144 Hz on your TCL TV?
HTML-код
- Опубликовано: 13 сен 2024
- Tips to get Ultra HD 2160p resolution with 144 Hz refresh rate on your TCL TV. Tested on C745 and C805 models.
TCL C745 review:
• TCL 55C745 2023 UHD 4K...
TCL C805 review:
• TCL C805 mini LED LCD ...
Check out my buying recommendations on Amazon (#ComissionsEarned):
www.amazon.com...
www.amazon.co....
I might be very late but this is how you can enable it. Make sure your tv is updated to the latest version, because there is a TCL c735 and other model updates released recently.
1- make sure you enable game mode on game picture mode.
2- then go to nvidia control panel/setup g-sync
1- "enable for windowed and full screen mode"
2- "select your monitor"
3- "enable settings for the selected display model".
Then basically click on "apply"
After that it should be enabled.
Then go to display settings in windows settings/advanced display/ choose refresh rate to 144Hz
Both ALLM and VRR will be enabled too.
Congrats🤝
What about TCL C735 and 144Hz? In windows options only show 120Hz at 4K
Same for c835, what card do you use?
@@OlegShalyminov RTX 3060
@@walterwolfgaming same for 4070s, people on forum saying that it's a problem windows+new Nvidia driver+TCL tv. It will work on Linux, and on old driver, but I do not tested it yet
@@walterwolfgaming doublicate my comment to you:
@TVguyDarko Finally, I enable "144HZ", but it's no good method to my opinion.
1. I installed new original non-activated Win 10 OS with Internet access.
2. then enable VRR on TCL
3. then enable G-Sync for TCL in Nvidia Control Panel
4. then in CRU will apear DisplayID 1.3 - it's says TCL can work on 144HZ (it's also appear even with new\actual driver)
5. then like forum's guys said i try to install 537.58 nvidia driver - it won't install because it's for older GPU, then 545.84 - same thing. Oldest driver for my 4070 Super is - 546.65 - i installed it with "clean instalation".
6. No 144hz appear in nvidia control panel or windows as-is
7. I try change resolution and Hz in nvidia control panel, 144hz with manual corrections from information in CRU DisplayID 1.3. - won't work, it will write "successfully apply" but don't work and don't apear anywere.
8. Like guys in forum said "Attention!!! 537.58 is the latest driver that works stably at 144Hz, after updating 545.84 you can only get 143Hz (if the mode does not work, do a clean installation of the driver)", I try 143Hz - and it's work with manual corrections from information in CRU DisplayID 1.3.
9. TCL write it's work on 144Hz, Windows and nvidia control panel will write 143Hz, but who cares.
BUT
I don't want use old nvidia driver 546.65 (it's launch driver, it's may contain a lot of bugs), I guess I must or contact TCL or Nvidia about that problem so they fixed it on new\actual drivers. So, and there is a problem, I'm from Russia, and I don't think they will be in contacting with me (I guess because of what happening in the world?). I will try to contact them, but maybe you also can help me with that? An forwarded that information to TCL and maybe Nvidia support somehow?
For now i better stick with actual driver and 120hz i think.
@@walterwolfgaming doublicate comment from your new video here for information (if someone will be in need)
@TVguyDarko Finally, I enable "144HZ", but it's no good method to my opinion.
1. I installed new original non-activated Win 10 OS with Internet access.
2. then enable VRR on TCL
3. then enable G-Sync for TCL in Nvidia Control Panel
4. then in CRU will apear DisplayID 1.3 - it's says TCL can work on 144HZ (it's also appear even with new\actual driver)
5. then like forum's guys said i try to install 537.58 nvidia driver - it won't install because it's for older GPU, then 545.84 - same thing. Oldest driver for my 4070 Super is - 546.65 - i installed it with "clean instalation".
6. No 144hz appear in nvidia control panel or windows as-is
7. I try change resolution and Hz in nvidia control panel, 144hz with manual corrections from information in CRU DisplayID 1.3. - won't work, it will write "successfully apply" but don't work and don't apear anywere.
8. Like guys in forum said "Attention!!! 537.58 is the latest driver that works stably at 144Hz, after updating 545.84 you can only get 143Hz (if the mode does not work, do a clean installation of the driver)", I try 143Hz - and it's work with manual corrections from information in CRU DisplayID 1.3.
9. TCL write it's work on 144Hz, Windows and nvidia control panel will write 143Hz, but who cares.
BUT
I don't want use old nvidia driver 546.65 (it's launch driver, it's may contain a lot of bugs), I guess I must or contact TCL or Nvidia about that problem so they fixed it on new\actual drivers. So, and there is a problem, I'm from Russia, and I don't think they will be in contacting with me (I guess because of what happening in the world?). I will try to contact them, but maybe you also can help me with that? An forwarded that information to TCL and maybe Nvidia support somehow?
For now i better stick with actual driver and 120hz i think.
Is it possible to do 1440p on the tcl c745 ? 🙏
does 240 motion rate mean i have 120hz?
Motion Rate 240 indicates a native refresh of 120Hz while Motion Rate 120 means a 60Hz refresh.. So yes that means you have 120hz
Working perfectly on my Mini Led. finally 144hz@4K Wohoo!
Awesome! Enjoy smooth gaming!
Too bad we need rtx 5090 for that
Too bad we need sth like rtx 5090 to be able to fully utilize that resolution/refresh.
Вот это да,я не знал ,что существуют оптические HDMI кабели :)
Yup, quite good option for long lengths!
still don't work for me, but thx for video.
Hey Oleg, I’ve forwarded your comment from the other video to my contact at TCL. I’ll let you know when I receive feedback.
@@TVguyDarko thx, I don't expect that, thanks. I will try today a new install windows 10 + old Nvidia drivers. Some guys from forum said that on Linux OS there is no problem and everything works on 144hz, but I don't check that.
@@TVguyDarko Finally, I enable "144HZ", but it's no good method to my opinion.
1. I installed new original non-activated Win 10 OS with Internet access.
2. then enable VRR on TCL
3. then enable G-Sync for TCL in Nvidia Control Panel
4. then in CRU will apear DisplayID 1.3 - it's says TCL can work on 144HZ (it's also appear even with new\actual driver)
5. then like forum's guys said i try to install 537.58 nvidia driver - it won't install because it's for older GPU, then 545.84 - same thing. Oldest driver for my 4070 Super is - 546.65 - i installed it with "clean instalation".
6. No 144hz appear in nvidia control panel or windows as-is
7. I try change resolution and Hz in nvidia control panel, 144hz with manual corrections from information in CRU DisplayID 1.3. - won't work, it will write "successfully apply" but don't work and don't apear anywere.
8. Like guys in forum said "Attention!!! 537.58 is the latest driver that works stably at 144Hz, after updating 545.84 you can only get 143Hz (if the mode does not work, do a clean installation of the driver)", I try 143Hz - and it's work with manual corrections from information in CRU DisplayID 1.3.
9. TCL write it's work on 144Hz, Windows and nvidia control panel will write 143Hz, but who cares.
BUT
I don't want use old nvidia driver 546.65 (it's launch driver, it's may contain a lot of bugs), I guess I must or contact TCL or Nvidia about that problem so they fixed it on new\actual drivers. So, and there is a problem, I'm from Russia, and I don't think they will be in contacting with me (I guess because of what happening in the world?). I will try to contact them, but maybe you also can help me with that? An forwarded that information to TCL and maybe Nvidia support somehow?
For now i better stick with actual driver and 120hz i think, and post it information in forum.
@@TVguyDarko @TVguyDarko doublicate comment from your new video here for information (if someone will be in need)
@TVguyDarko Finally, I enable "144HZ", but it's no good method to my opinion.
1. I installed new original non-activated Win 10 OS with Internet access.
2. then enable VRR on TCL
3. then enable G-Sync for TCL in Nvidia Control Panel
4. then in CRU will apear DisplayID 1.3 - it's says TCL can work on 144HZ (it's also appear even with new\actual driver)
5. then like forum's guys said i try to install 537.58 nvidia driver - it won't install because it's for older GPU, then 545.84 - same thing. Oldest driver for my 4070 Super is - 546.65 - i installed it with "clean instalation".
6. No 144hz appear in nvidia control panel or windows as-is
7. I try change resolution and Hz in nvidia control panel, 144hz with manual corrections from information in CRU DisplayID 1.3. - won't work, it will write "successfully apply" but don't work and don't apear anywere.
8. Like guys in forum said "Attention!!! 537.58 is the latest driver that works stably at 144Hz, after updating 545.84 you can only get 143Hz (if the mode does not work, do a clean installation of the driver)", I try 143Hz - and it's work with manual corrections from information in CRU DisplayID 1.3.
9. TCL write it's work on 144Hz, Windows and nvidia control panel will write 143Hz, but who cares.
BUT
I don't want use old nvidia driver 546.65 (it's launch driver, it's may contain a lot of bugs), I guess I must or contact TCL or Nvidia about that problem so they fixed it on new\actual drivers. So, and there is a problem, I'm from Russia, and I don't think they will be in contacting with me (I guess because of what happening in the world?). I will try to contact them, but maybe you also can help me with that? An forwarded that information to TCL and maybe Nvidia support somehow?
For now i better stick with actual driver and 120hz i think.
@@TVguyDarko I dunno what happend but i try to type you how i "solve" (actualy no, becouse it's work only on old driver and 143HZ in Nvidia control panel) my problem, but youtube do not post my comments, i don't know why, maybe they too long. I guess i must make video by myself.