This is great, I'll check out your channel for more ideas. I love making things for painting and I've been thinking about making a new box, I have a little cheap cigar box that I can connect to my tripod and have just started using it, so now I can decide what I'd like different (size etc).
Sadly that circular screw mount will eventually pull out. Better to use a "T nut" mounted from the inside so the pressure is from the opposite side of the of the panel and not able to pull through. Other than that , nice job. Cheers Norm
Your right, I've actually replaced it now with a SmallRig cheese plate which I've drilled into the bottom of the box. I'm going to uploading a new video soon where I show the improvements that I've made since
@@GeorgeFrederickThomas So you got a couple of 1/4 inch screws drill them to attach it to the box and then the thread from tripod goes into one of the free holes? How did it work out?
Thanks I'm very happy you found the video helpful! Getting the tripod thread and a good tripod is tricky. I'm actually not very happy with the tripod I used so I'm going to get a different one but it still worked. Good luck with making your pochade box :)
Hi I'm happy you enjoyed the video! I found those on eBay I can't find the same ones but these look quite similar: images.app.goo.gl/oSL2EJykVftSnjTQA I hope this helps :)
Awesome. I made something similar from an old cigar box 2 years ago. Whole thing, thrift store tripod included was under 50,- of material. I'm curious what you use as a pannel carrier.
Thanks, that's cool! It was very satisfying to build especially as most plein air boxes are quite expensive. I've made my own lightweight wet panel carrier. Here's the video of me building it ruclips.net/video/qzd5mRFBxIY/видео.html
Thank you so much for creating this video. May I ask what kind of hinge are you using on the side of the box. I am assuming that keeps it steady when you apply pressure when painting. I found a box at home that I think might work, but it needs that side hinge. Is there a name for that hinge? Thank you!
I'm happy you enjoyed the video! I found those on eBay but I can't find the same ones, these look quite similar, although I'm not sure if they could be added to the outside of the box: images.app.goo.gl/oSL2EJykVftSnjTQA I hope this helps :)
Great video:)! can you tell me where can i buy the:" circular indent"? that's its name? the small part where i need to put the plate from the tripod?:) Best regards
The screw thread came with my go pro but you can buy it individually I found this site selling it cheaply: www.dhgate.com/product/mini-tripod-screw-mount-adapter-with-1-4/482668163.html
@@GeorgeFrederickThomas THANKS a lot for the quick reply:)! i found this in my country( Romania) : www.miniinthebox.com/ro/p/1-4-surub-trepied-inch-adaptor-surub-trepied-pentru-flash_p196814.html?Yuriy&litb_from=affiliate_gan&clickid=wenV9pRpLxyORVLwUx0Mo3EUUkiwHVQpA1iE2w0&irgwc=1 I think that this is good for it? no:)? so i would just need to put a hole in the wood but i feel that this is too long maybe the wood is not so thick so it would go thorugh the interior of the box?:) can you also tell me if i want to spray a color on the wood, i would need to spray a woord varnish first ? and after it is dry, i spray the color? and after the varnish again? or is it fine to spray directly the color?
@@tusaiistyartist I think that looks good, try adding some extra wood on the interior so it won't stick out on the inside. I would apply a wood primer first and that paint on top of that. The primer will protect the wood so you don't need to varnish unless you want too
Thanks so much for explaining and showing how you converted a box into a pochade!
respect! you do it with your own hands
@@mister_66 thanks :)
Thank you I appreciate your help.
Thank you so much for the video! I bought a small box and i'm planning to do this, but turn into a box for oil pastel plein-air. S2
That's great! I hope it goes well
Thanks for thinking of other people who like you are/were searching for a personal solution for choice of Pochard.
You're welcome, thanks!
Satisfying to make useful things.
Thanks, it really is!
This is great, I'll check out your channel for more ideas. I love making things for painting and I've been thinking about making a new box, I have a little cheap cigar box that I can connect to my tripod and have just started using it, so now I can decide what I'd like different (size etc).
Thanks, I'm happy you like it. That sounds great, good luck with it :)
Great stuff, George. Definitely helpful, insightful, and thoughtful
Thanks! I'm glad It was helpful :)
Sadly that circular screw mount will eventually pull out. Better to use a "T nut" mounted from the inside so the pressure is from the opposite side of the of the panel and not able to pull through. Other than that , nice job. Cheers
Norm
Your right, I've actually replaced it now with a SmallRig cheese plate which I've drilled into the bottom of the box. I'm going to uploading a new video soon where I show the improvements that I've made since
@@GeorgeFrederickThomas So you got a couple of 1/4 inch screws drill them to attach it to the box and then the thread from tripod goes into one of the free holes? How did it work out?
@@callmedeno yes that's how I attached it. It works very well and it's a lot more secure :)
Super job!
Thanks!
Nice work George.
Thank you :)
George !! amazing THANKS ! I am going to try to do something similar, the most difficult thing to find is the tripod and the base
Thanks I'm very happy you found the video helpful! Getting the tripod thread and a good tripod is tricky. I'm actually not very happy with the tripod I used so I'm going to get a different one but it still worked. Good luck with making your pochade box :)
This is wonderful, thanks for the demo!
You're welcome, I'm glad you enjoyed it!
I'm doing the same but for watercolours it's kind of fun.
Brilliant….
Thank you :)
Hello, great video! I was wondering where you got the those adjustable lid mounts on the side of your box?
Hi I'm happy you enjoyed the video! I found those on eBay I can't find the same ones but these look quite similar: images.app.goo.gl/oSL2EJykVftSnjTQA
I hope this helps :)
Awesome. I made something similar from an old cigar box 2 years ago. Whole thing, thrift store tripod included was under 50,- of material. I'm curious what you use as a pannel carrier.
Thanks, that's cool! It was very satisfying to build especially as most plein air boxes are quite expensive. I've made my own lightweight wet panel carrier. Here's the video of me building it ruclips.net/video/qzd5mRFBxIY/видео.html
Here's the link to building the panel carrier : ruclips.net/video/qzd5mRFBxIY/видео.html
@@GeorgeFrederickThomas Oh, that is super. Thanks!
You're welcome :)
Thank you so much for creating this video. May I ask what kind of hinge are you using on the side of the box. I am assuming that keeps it steady when you apply pressure when painting. I found a box at home that I think might work, but it needs that side hinge. Is there a name for that hinge? Thank you!
I'm happy you enjoyed the video! I found those on eBay but I can't find the same ones, these look quite similar, although I'm not sure if they could be added to the outside of the box: images.app.goo.gl/oSL2EJykVftSnjTQA
I hope this helps :)
Much cheaper than buying any famous brand that costs you an arm and a leg. Good job!
You're right! Thanks!
George, I can’t find the side friction lock hinges anywhere…any link or idea please. Can’t find anything online that matches. Thanks. Ash
Very good👍💐
Thanks! :)
I’d have stained the box and the wood first but that’s just for aesthetic puroses
Yes I can imagine that would look really nice
Good vid. Subbed. George my father's name is also George Thomas. George Melville. I am Daniel Melville Thomas. Watercolor painter.
Thanks for subscribing :) welcome to my channel Daniel
Great video:)! can you tell me where can i buy the:" circular indent"? that's its name? the small part where i need to put the plate from the tripod?:) Best regards
The screw thread came with my go pro but you can buy it individually I found this site selling it cheaply: www.dhgate.com/product/mini-tripod-screw-mount-adapter-with-1-4/482668163.html
@@GeorgeFrederickThomas THANKS a lot for the quick reply:)! i found this in my country( Romania) : www.miniinthebox.com/ro/p/1-4-surub-trepied-inch-adaptor-surub-trepied-pentru-flash_p196814.html?Yuriy&litb_from=affiliate_gan&clickid=wenV9pRpLxyORVLwUx0Mo3EUUkiwHVQpA1iE2w0&irgwc=1
I think that this is good for it? no:)? so i would just need to put a hole in the wood but i feel that this is too long maybe the wood is not so thick so it would go thorugh the interior of the box?:) can you also tell me if i want to spray a color on the wood, i would need to spray a woord varnish first ? and after it is dry, i spray the color? and after the varnish again? or is it fine to spray directly the color?
@@tusaiistyartist I think that looks good, try adding some extra wood on the interior so it won't stick out on the inside. I would apply a wood primer first and that paint on top of that. The primer will protect the wood so you don't need to varnish unless you want too
what's the adjustabe hinge called? i tried looking for it in my hardware shop but cant find it
Hi Luca, I found those on eBay, I can't find the same ones but these look quite similar: images.app.goo.gl/oSL2EJykVftSnjTQA
I hope this helps :)
Love your paintings, you need tools!
Awesome! I'm just a bit curious about the arm holding the gopro - what is that made of?
Thanks! The arm is made of plastic, here's the Amazon link to the one I use: amzn.to/3jCvSsG
@@GeorgeFrederickThomas Looks good and flexible! Unfortunately it doesn't look like that ships to my area but thanks for the info!
@@charlenesart2207 that's a shame it doesn't ship to your area. Hopefully you'll be able to find one that works :)
@@GeorgeFrederickThomas Thanks! Looking forward to try making my own box that can film :)
@@charlenesart2207 Awesome! I look forward to seeing it. Good luck!
whats that screw you use to hold the painting in place calles?
I can't find the exact screw but this is the sort of screw I use: www.aliexpress.com/item/4000806377603.html
Does that palette absorb any of the oil from the paint?
I varnished the the palette with a wood varnish so the wood doesn't absorb the any of the oil
@@GeorgeFrederickThomas okay, would that work for a store bought wooden palette as well? Instead of using the linseed oil method
Yes it would work for that too
@@GeorgeFrederickThomas okay, thanks a lot!
👍👍👍👍👍😍😍😍😍😍😘
I recommend woodglut to every beginner and not only.