Hello Jimmy love your stuff but dont understand when you activated the glow plug relay and measures the voltage at 2.9vols you said that was fine shouldnt the glow plug realy supply battery voltage to the plugs when activated? Kind regard Jay
Sealy sell the same gun (probably just a re badged same tool). Do you go straight for the 40nm setting and buzz them free or build it up over a few lower settings like it says in the manual ?
My blue coolant light stays on for about 10 minutes in morning i have had the fluid changed recently but its always done this, why is that reason? Do you think the coolant sensor could be faulty
@@ORileysAutosappreciate the reply pal, wish you lived near me, you are the best on these vivaros👍🏼 i just had a fault code come on my van, its reads p0380😮
Not related to this video but I just watched the short you posted earlier. The cheek of some people come out and jump start my car for free. Then that leads to those who agree to the price and after you come out and do the work and when you are finished the work they say I will pay you later. Hopefully that doesn't happen to you too often.
My brother has a 2016 minibus version of this vehicle and has spent thousands trying to trace an intermittent misfire 2 visits to main dealer several other mechanics and no body can solve the fault he has had 2 throttle pedals replaced injectors a complete engine wiring loom and a replacement ecu I cannot honestly believe in this day and age with all the diagnostics available no one is able to find this fault he is even talking about scrapping an otherwise mint vehicle😢
@O'Rileys Autos are they that bad!?!? BTW cleaned out a transit custom dpf 210k miles. Codes for soot accumulation. No cause like broken wire or p codes. The kpa inlet pressure was 80 kpa! Got it down to 30kpa with normfest cleaner I can't get launch stuff! What is an acceptable pressure for these? I e had em as low as 7kpa it either needs replacing or some decent stuff haha
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Thanks
Thank you
What do you use if you can’t move them
Hello Jimmy love your stuff but dont understand when you activated the glow plug relay and measures the voltage at 2.9vols you said that was fine shouldnt the glow plug realy supply battery voltage to the plugs when activated?
Kind regard Jay
No, Max 4.5v
How? The glow plugs take 12volts and a high current to operate?
@@jaykent6645 not how they work, check the glow plugs you buy, they will say something like Rated Voltage [V]: 4,5
Do u know where the glow plug relay is located on that engine
next to the battery
How much would you charge for this job? Thanks mate
Sealy sell the same gun (probably just a re badged same tool). Do you go straight for the 40nm setting and buzz them free or build it up over a few lower settings like it says in the manual ?
Build it up
Hi Jimmy, just wondering if that impact gun would work with ryobi compressor mate?
Yes of course. Although it will struggle to keep up due to small tank
How much is it to have them changed
My blue coolant light stays on for about 10 minutes in morning i have had the fluid changed recently but its always done this, why is that reason? Do you think the coolant sensor could be faulty
It just means the engine hasn't warmed up yet
@@ORileysAutosappreciate the reply pal, wish you lived near me, you are the best on these vivaros👍🏼 i just had a fault code come on my van, its reads p0380😮
@@Trekman78Im getting p0380 also, was it plugs?
Jimmy what are you doing with my Do1 tool .
🏃♂️
Mmmmmm that’s not good 😂
do the injectors require coding as you replace them or not? tia
This isn't injectors but Glow plugs
Not related to this video but I just watched the short you posted earlier. The cheek of some people come out and jump start my car for free. Then that leads to those who agree to the price and after you come out and do the work and when you are finished the work they say I will pay you later. Hopefully that doesn't happen to you too often.
My brother has a 2016 minibus version of this vehicle and has spent thousands trying to trace an intermittent misfire 2 visits to main dealer several other mechanics and no body can solve the fault he has had 2 throttle pedals replaced injectors a complete engine wiring loom and a replacement ecu I cannot honestly believe in this day and age with all the diagnostics available no one is able to find this fault he is even talking about scrapping an otherwise mint vehicle😢
I heard a few horror stories about these vans,
I'm not a fan of that scan tool. Screen seems smaller and the operating system seems different too.
That Do1 has just been released on the market jimmy must be the only guy out there that’s has one .
Got handed to me by the company owner directly at Automechanika
Got an egr cooler to do on one of these bastards when it turns up
Sorry to hear 😢
@O'Rileys Autos are they that bad!?!?
BTW cleaned out a transit custom dpf 210k miles. Codes for soot accumulation. No cause like broken wire or p codes. The kpa inlet pressure was 80 kpa! Got it down to 30kpa with normfest cleaner I can't get launch stuff! What is an acceptable pressure for these? I e had em as low as 7kpa it either needs replacing or some decent stuff haha