ECGS Bushing Install | Toyota Sequoia
HTML-код
- Опубликовано: 15 сен 2024
- ECGS Bushing Install | Toyota Sequoia
In this video we install the East Coast Gear Supply clamshell bushing to replace the old and faulty needle bearing.
OEM seals- Passenger- amzn.to/3M1RpYQ
Driver- amzn.to/3LUb2Sk
National seals- amzn.to/3a1VAXh
- amzn.to/3al9q6Z
gear oil- amzn.to/3LSICby
pry bar set- amzn.to/3wS92EI
ECGS, bushing, removal tool and install tool- eastcoastgears...
Love the channel Mo. I am addicted to the first gen Sequoias. Keep the great content coming. Keep us posted on how the replacement bearings are doing.
Thank you so much! i am glad you enjoy it!
I just put one in my tacoma it takes a little patience getting the puller in the right spot the noise went away it worked
yeah it can take some time to get it right. im glad it fixed your problem
thanks for the video!
anytime im glad you enjoy it
Put the new bushing in the freezer for a couple hours and it will be a lot easier to drive into place with the puck tool.
It also works great when reinstalling the upper ball joints, especially SPC knuckle inserts.
thanks for the great tip
Nice job Mo! Thanks for the info.
Im Glad it was helpful
Did you notice any humming? I’m experiencing a humming noise on my 04. Some guys on the forums say this is the culprit.
no i just went ahead and replaced it since i am going to lift it. its just preparation for the other mods
Adding to Xavior’s question, you only replace the driver’s side, why would it not be both?
because that is the problem area and it will not fit on the other side
What was the symptoms that let you know that you needed to replace this needle bearings? I'm having the infamous humming sound that starts at around 35 mph and continues and it makes it more vibration at around 55 mph. thanks
i thought that was my problem so i just changed it but if you are having the humming then you should just go ahead and change it
hey. what year is this sequoia? I have a 2003 and I am trying to find the correct axle nut size. I bought a 35mm but you said 36mm and I have heard 37mm. Do you know the answer to this please?
i am not sure if there is a difference i just rented the tool from the parts store, they have all those sizes in them
Hi. Can you link me those brake lines please?
those brake lines where custom made from crown performance just call them
I see there’s a needle bearing on the passenger also. How come the passenger side doesn’t get replaced also?
i am really not sure they only sell the driver side from what i found