Personally like the 7.25mm internal diameter stainless ones, should be ideal for the new Ultra Elite gel balls. A lot of people swear by using a barrel 0.1mm larger than the gels themselves.
I feel like my stainless barrel is messing with my accuracy. I have the cylinder/barrel ratio pretty close to 1.8:1 but being tight through the bore, can the gels start to grab the wall inducing a spin before the hop up and throwing them in random directions? I feel like my stock set up was more accurate over 30m than what I have now.
Yes you are correct, though this was just a small video of the difference between alloy and stainless as a lot of people have been asking. 🤙🏽 We will do a more in depth video later on explain what you said.
Just ordered the stainless steel barrel and i put my stock barrel under hot water and got the t Piece out and wanted to know if the stock t piece will be fine for the stainless streel barrel. My t piece is nylon
Personally like the 7.25mm internal diameter stainless ones, should be ideal for the new Ultra Elite gel balls. A lot of people swear by using a barrel 0.1mm larger than the gels themselves.
For sure! If you are happy with it, no reason to change, definitely agree!
I feel like my stainless barrel is messing with my accuracy. I have the cylinder/barrel ratio pretty close to 1.8:1 but being tight through the bore, can the gels start to grab the wall inducing a spin before the hop up and throwing them in random directions? I feel like my stock set up was more accurate over 30m than what I have now.
Yes, stainless steel barrels are better but the barrel length is equally as important. The cylinder porting is also very important.
Yes you are correct, though this was just a small
video of the difference between alloy and stainless as a lot of people have been asking. 🤙🏽 We will do a more in depth video later on explain what you said.
Hi sir, if i were to have a 45 cm of inner barrel and 35 cm of outer barrel, should i buy 12 inch of fishbone or just 9 inch
Do you ship to the Philippines??
Just ordered the stainless steel barrel and i put my stock barrel under hot water and got the t Piece out and wanted to know if the stock t piece will be fine for the stainless streel barrel. My t piece is nylon
I think he kinda explains that by having the nylon t piece saying that the stock ones are glues in most od the time
What is the dimension of the stainless steel barrel???outer and inner diameter??
7.25mm inner 9.5mm outer, it son our Website.
What about brass inner barrel?
They vary from 7.2mm inner to 7.4mm inner
@@GelBallUndercover is brass good for gel balls?
Very good, our GE brass barrels are amazing.
@@GelBallUndercover ok thanks,
Went looking on your website to find the 7.15 barrels and they aren't there 🤦🏻♂️ I've been trying to find 1 for weeks now
Not long! Give it 1-2 weeks ;)
do they sell stainless steel barrels in hardware stores with that diameter?
Unfortunately not! They are a full custom spec.
what about copper barrel ??
can u mod blaster to .177 cal ?
new video?
A few will drop today!
noice