recently went HPA and never going back but when my gun was still AEG I had one of these along with my guarder 16.1 gears and a jg blue motor and it had great trigger response... definetly the best mosfet/programable trigger unit by far
@@KP-uz3nk HPA all the way, a fusion engine has a nice crisp feeling trigger and you will never have to worry about replacing gears, piston teeth or re-shimming after replacing parts. Just plug it in and you are good to go, had mine 3 years never even had to change o-rings yet.
@@jediknight129 Tippmann M4 is great for the recoil and HPA also CO² compatible, cheap but I think they are discontinued now as I cant find any in stock.
I love the Titan. I have it in my DMR, M107 and in my Scar-H. Easy to Install and program. Best mosfet option for all professional airsoft players. Greetings from Germany
I bought a gun from umbrella armory and they use this mosfet. It works awesome. They set everything that is best for your gun before they ship it. I have only changed my fire selector to semi and 3 round burst. The rps is 30. I have also turned on my low battery warning.
I can tell your a kid from that grammar. Also, being an adult, I do extensive research on an airsoft gun before I buy one. If you had half a brain, you would spend your money on something else, and upgrade it yourself for half the price. Umbrella Armory rips people off, they charge way too much for their guns.
Dominator775 yeah i saw your video. Look man of you don't like them that's fine. But the fact that you felt you had to write me a comment saying so is pretty stupid.
We've started playing airsoft about 6 months ago. Got the Gate Titan is in all our replica's (6 in total with 4 man ) all ICS CXP models. It is amazing, never shot a gun without this mosfet. The amount of settings is insane, hairtrigger ftw! I usually run my settings as follows: Safe = Safe Semi & Auto = Hairtrigger trigger action = Semi shot Whole short trigger action= 3rd burst Whole trigger action and hold = Full auto You guys forgot to mention that you can on-the-go turn pre-cocking on or off! Fire a shot with your selector switch on semi and hold the trigger, now turn the selector switch to full auto. You get a vibration from your motor, now pre-cocking is on. Fire a few shots to get the piston right. Voila! To turn it off do the opposite, on full auto; press and hold the trigger and turn it to semi. Fire a few shots and your pre-cocking is off. My other settings are: Pre-cocking mode: smart Pre-cocking boost: high Burst (mode): 3rds (full) ROF Stabilization: Off (100%) Sniper delay: Off Battery Protection: LiPo Battery cell: Auto Low battery warning: 3.2V 30-rds Limit: On (in case of malfunctioning due to grease on the trigger sensors) Cycle detection: On (ofc otherwise the Titan ia a waste of money) Equalizer: Off (don't need it with these trigger settings) Gear ratio: Standard And i lend my guns to my friends, now when they want to buy an replica they also want to have an Titan installed because they find the stock trigger unit really really bad 😂
Nice just wondering what the equalising setting is for Here i have one in a krytac trident mk1 45k a1 supreme 12:1shs gears Lonex red and a cut m100 to get it on 340fps Precocking none Gearset mode speed Safe semi burst/auto 3burst No precocking Cycledetection Battery warning at 3.4 And no delay
Honestly I’m building a so called “sleeper gun” aka a $150 valken and it’s performs phenomenal, I’m shooting 28rps at 440fps and my trigger response is stupid fast honestly don’t see y it would not still be amazing
I have one of these but haven’t decided what to put it in. Thinking of getting a VFC 416 or put it in my Krytac SPR MK1. GATE just released the V3 version. I will likely put one in an AK74 at some point.
I now have the Titan. Love it to bits - run it in my DMR. Sensitivity at either 1 or 2 for bragging rights and then pre cock on for that trigger response :)
BTC isn't widely available in the market like the Titan is, and those mosfets are only officially sold by BTC themselves so we can't really sell nor review it as of this point.
Will it get fried if I used a 3 round burst too often? I'm a little salty after the kong v3 mosfet I used burned itself out after only a day and about 5 150 round mags on a 7.4v lipo. So I want to make sure that if I'm burning $100 on a mosfet with trigger that it'll last
How do I get rid of the regional lock? I bought it a while back but moved countries ever since; meaning different rules and I need to adjust stuff that I currently can't due to the lock..
There is nothing wrong with that. It is still an awesome mosfet. The Titan just have a cooler user interface and uses optical sensors instead of a micro-switch. Titian may have a better trigger response. But other than that, they both are very similar in terms of function.
RedWolf Airsoft i was joking, the btc spectre is better. You cant compare the trigger response of the two since its how you set up you gun the determines that. The btc spectre has bluetooth built in which i would choose anyday. And since it is not massproduced the costumer service is the way better. It might not have the trigger sensors but it is way more advanced in how it reads your gun and all of the specs it can show on how you gun is running.
I see, but isn't that the same thing as the Statistics tab on the USB-Link? It shows the stats and how your guns is running. Actually they are currently in the works on adding a bluetooth feature to the Titan.
can you guys help me ? i got a arp9 with a gate titan v2advenced and a cnc advanced maxx trigger the problem is that the trigger in the menu is allready at 3 so i cant set the sensivity lower than 3 is there a way to get that done.
would be nice to have an android app, because i'm not taking my laptop with me to skirms, currently i have an intel compute stick with a tiny usb router to configure the titan via my phone through vnc.
Actually you can purchase a programming card instead. It can pretty much do 80% of the function of the USB-Link. Of course the programming card doesn't allow you to re-calibrate your selector and update firmware, but that is a lot more portable than a computer for sure.
For some reason I think btc Specture mk2 has all same optional settings plus Bluetooth but not the future to update the system. What your thoughts abaut btc mosfit? And or maybe in the future you will be covering this mosfit as well as titan? By the way great video guys :) keep up great work and don't forget to have some fun while you makeing them :)
From what we know. BTC Spectre is a great mosfet. However, they aren't commercialized and mass produced like the Titan is. Since the mosfet is basically sold exclusively by BTC themselves only, so we can't really compare them side by side. Base on the information we gathered, they both are great mosfets. BTC has the ability to program the unit through bluetooth on the fly, whereas the Titan has a faster trigger response due to the fact it uses optical sensor instead of a microswitch. Most of the features for both mosfets overlap, but Titan just have the feature where it allows you to adjust the trigger pull and travelling distance. Of course, optical sensor are prone to be interrupted by external substances, but simply cleaning it and the mosfet will be good as new. So at the end of the day, it is just a matter of preference. Both are great, but Titan is just more readily available in the market rather than BTC's which is more of a bespoke mosfet.
That gun has been completely modified. In terms of external, the following are the parts that was used to build that gun: - G&P Magpul MOE M4 Carbine (FG) (Discontinued) - RWA Samson Rainier Arms Rail 12.37 inch - Knight's Armament Airsoft (Madbull) QDC 3-Prong Flash Hider (CW / 14mm+) - Magpul RVG Rail Vertical Grip 1913 Picatinny - Black (MAG412) All of those can be found on our online store www.redwolfairsoft.com
I have couple M4...... one of them with front wire, and the other with rear...... I just installed aTitan Mosfet with rear wire on my front wired M4 , of course, I did some modifications on the gearbox and the rifle to make it work.
We do sell chronos, here are the ones that we have available at the moment: www.redwolfairsoft.com/redwolf/airsoft/AdvanceSearchResult?search=true&productcode=chrono&mode=simple&keyword_search=chrono&productname=chrono&brandId=
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Flawless ending
"Take 40 - ok guys lets get it right this time..."
xD
recently went HPA and never going back but when my gun was still AEG I had one of these along with my guarder 16.1 gears and a jg blue motor and it had great trigger response... definetly the best mosfet/programable trigger unit by far
So if you had to choose between HPA and going with a Gate Titan you'd pick HPA?
@Brandon Harrison hey thanks for the response! What FCU settings do you reccomend? I ended up getting the F2 P*
@@KP-uz3nk HPA all the way, a fusion engine has a nice crisp feeling trigger and you will never have to worry about replacing gears, piston teeth or re-shimming after replacing parts.
Just plug it in and you are good to go, had mine 3 years never even had to change o-rings yet.
@@G_Zero127 shame they haven't built the only great thing about HPA yet. we need a cheaper competitor to the DG recoil engine.
@@jediknight129 Tippmann M4 is great for the recoil and HPA also CO² compatible, cheap but I think they are discontinued now as I cant find any in stock.
I love the Titan. I have it in my DMR, M107 and in my Scar-H. Easy to Install and program. Best mosfet option for all professional airsoft players.
Greetings from Germany
So good to have you back Tim
I bought a gun from umbrella armory and they use this mosfet. It works awesome. They set everything that is best for your gun before they ship it. I have only changed my fire selector to semi and 3 round burst. The rps is 30. I have also turned on my low battery warning.
what a giant waste of money
Dominator775 well when you become a big boy. You can work and buy what you want.
I can tell your a kid from that grammar. Also, being an adult, I do extensive research on an airsoft gun before I buy one. If you had half a brain, you would spend your money on something else, and upgrade it yourself for half the price. Umbrella Armory rips people off, they charge way too much for their guns.
Dominator775 yeah i saw your video. Look man of you don't like them that's fine. But the fact that you felt you had to write me a comment saying so is pretty stupid.
You're stupid for buying one is the point I'm trying to make.
Great video! Both funny and informative! Nice job guys!
RIPLEYS BELIEVE IT OR NOT! TIM IS BACK!!!!
HOLY SHIT IS TIM BACK!!!
Yes he is.
HELL YEAH
raptor airsoft TIM SUX MARK IS BETTER
Lol, I'm just glad they're both around
Both are good in their own way. Glad to have them both doing these videos.
Welcome back Tim
"She is offended" I see what you did there.
We've started playing airsoft about 6 months ago. Got the Gate Titan is in all our replica's (6 in total with 4 man ) all ICS CXP models. It is amazing, never shot a gun without this mosfet. The amount of settings is insane, hairtrigger ftw! I usually run my settings as follows:
Safe = Safe
Semi & Auto =
Hairtrigger trigger action = Semi shot
Whole short trigger action= 3rd burst
Whole trigger action and hold = Full auto
You guys forgot to mention that you can on-the-go turn pre-cocking on or off!
Fire a shot with your selector switch on semi and hold the trigger, now turn the selector switch to full auto. You get a vibration from your motor, now pre-cocking is on. Fire a few shots to get the piston right. Voila!
To turn it off do the opposite, on full auto; press and hold the trigger and turn it to semi. Fire a few shots and your pre-cocking is off.
My other settings are:
Pre-cocking mode: smart
Pre-cocking boost: high
Burst (mode): 3rds (full)
ROF Stabilization: Off (100%)
Sniper delay: Off
Battery Protection: LiPo
Battery cell: Auto
Low battery warning: 3.2V
30-rds Limit: On (in case of malfunctioning due to grease on the trigger sensors)
Cycle detection: On (ofc otherwise the Titan ia a waste of money)
Equalizer: Off (don't need it with these trigger settings)
Gear ratio: Standard
And i lend my guns to my friends, now when they want to buy an replica they also want to have an Titan installed because they find the stock trigger unit really really bad 😂
Nice just wondering what the equalising setting is for
Here i have one in a krytac trident mk1
45k a1 supreme
12:1shs gears
Lonex red and a cut m100 to get it on 340fps
Precocking none
Gearset mode speed
Safe semi burst/auto
3burst
No precocking
Cycledetection
Battery warning at 3.4
And no delay
Can you help me with the installation on the ICS Gearbox? I'm having trouble on my ICS Par MK3 MTR.
1:21 what the heck
Gambit is a magician ;)
Following the Evo of pball, where getting closer and closer to a time where a little lcd or oled screen on these will be the norm
Can I expect as great of a trigger response as this with this mosfet installed into a stock G&G Raider 2.0?
Not quite as good but pretty close
Honestly I’m building a so called “sleeper gun” aka a $150 valken and it’s performs phenomenal, I’m shooting 28rps at 440fps and my trigger response is stupid fast honestly don’t see y it would not still be amazing
I have one of these but haven’t decided what to put it in. Thinking of getting a VFC 416 or put it in my Krytac SPR MK1.
GATE just released the V3 version. I will likely put one in an AK74 at some point.
Just ordered one and I’m hyped
Did you get it?
I now have the Titan. Love it to bits - run it in my DMR. Sensitivity at either 1 or 2 for bragging rights and then pre cock on for that trigger response :)
I wonder how long it took them to get that outro perfect...
Got one! Yet to try it out though...
How was it?
I could use this...
No more BTC mosfet?
BTC isn't widely available in the market like the Titan is, and those mosfets are only officially sold by BTC themselves so we can't really sell nor review it as of this point.
You should review it
Wu Helen btc is out of business now
Will it get fried if I used a 3 round burst too often?
I'm a little salty after the kong v3 mosfet I used burned itself out after only a day and about 5 150 round mags on a 7.4v lipo. So I want to make sure that if I'm burning $100 on a mosfet with trigger that it'll last
I installed mine an hour literally an hour before this video
Will they make it for TM recoil shock sopmod?
John Mullally did you even watch the video?
Lukas Svensson obviously not. Lol
John Mullally XD
For a Recoil sheck, you will a btc spectre next gen. Good luck
Wait until next year when they have a unit for recoilshocks
I just bought the gate titan v3 for my aks74u I also bought the programmer so I don’t have to carry a laptop to games
Yall are like the car show of the airsoft community.
That's a really good question if any physical hits on the gun could shoot the gun.
Like Tim and Gambit, not bad guys, keep fighting!
I'm just curious if the AUG mode will work on an aeg that does not have a duel stage trigger?
This is actually really cool
How do I get rid of the regional lock? I bought it a while back but moved countries ever since; meaning different rules and I need to adjust stuff that I currently can't due to the lock..
I have one in my mk17 ssr, it's amazing
What a great review! They better release a Titan MOSFET for Next gen as well :\
I have the V3 version preordered. It will be love at first shot.
rofl that intro was fucking great
Do I need the programmer as well if I buy the gate titan or can I buy it without it
Tim hair color is very nice~
But i already have a BTC Spectre MK II :(
Die_Quelle me too😓
There is nothing wrong with that. It is still an awesome mosfet. The Titan just have a cooler user interface and uses optical sensors instead of a micro-switch. Titian may have a better trigger response. But other than that, they both are very similar in terms of function.
The only thing I am missing is the optical sensor for the trigger.
RedWolf Airsoft i was joking, the btc spectre is better. You cant compare the trigger response of the two since its how you set up you gun the determines that. The btc spectre has bluetooth built in which i would choose anyday. And since it is not massproduced the costumer service is the way better. It might not have the trigger sensors but it is way more advanced in how it reads your gun and all of the specs it can show on how you gun is running.
I see, but isn't that the same thing as the Statistics tab on the USB-Link? It shows the stats and how your guns is running. Actually they are currently in the works on adding a bluetooth feature to the Titan.
saw a hair trigger mod in the airsoft teching page.. even the wind can activate the trigger pull.
beautiful
Love the hair Tim
If you are getting a gate titan should you get a short stroke gear set to keep up with the rate of fire or would your stock gears be alright
can you guys help me ? i got a arp9 with a gate titan v2advenced and a cnc advanced maxx trigger the problem is that the trigger in the menu is allready at 3 so i cant set the sensivity lower than 3 is there a way to get that done.
My cousin just got one of these for Xmas I'll wait to play with him again before I commit the $175
Does that work like in bullpup style guns? Considering the triger is away from the GB
would be nice to have an android app, because i'm not taking my laptop with me to skirms, currently i have an intel compute stick with a tiny usb router to configure the titan via my phone through vnc.
Actually you can purchase a programming card instead. It can pretty much do 80% of the function of the USB-Link. Of course the programming card doesn't allow you to re-calibrate your selector and update firmware, but that is a lot more portable than a computer for sure.
Hey is the kwc gbb 1911 an airsoft gun or a BB gun??
My titan doesn’t make the sound when I plug the battery in can someone help explain what’s wrong with it?
mate u guys' last few line is ringing my ear
Is it possible to have a simplified version and cost less to make it more affordable?
When will there be more WE Scar H's in stock?
For some reason I think btc Specture mk2 has all same optional settings plus Bluetooth but not the future to update the system. What your thoughts abaut btc mosfit? And or maybe in the future you will be covering this mosfit as well as titan?
By the way great video guys :) keep up great work and don't forget to have some fun while you makeing them :)
The BTC is far superior.
i must say Gate is like the budget version of BTC, but i agree, BTC is far more superior..... kinda wished they mass produced it tbh
From what we know. BTC Spectre is a great mosfet. However, they aren't commercialized and mass produced like the Titan is. Since the mosfet is basically sold exclusively by BTC themselves only, so we can't really compare them side by side.
Base on the information we gathered, they both are great mosfets. BTC has the ability to program the unit through bluetooth on the fly, whereas the Titan has a faster trigger response due to the fact it uses optical sensor instead of a microswitch. Most of the features for both mosfets overlap, but Titan just have the feature where it allows you to adjust the trigger pull and travelling distance. Of course, optical sensor are prone to be interrupted by external substances, but simply cleaning it and the mosfet will be good as new. So at the end of the day, it is just a matter of preference. Both are great, but Titan is just more readily available in the market rather than BTC's which is more of a bespoke mosfet.
What exact name of this mosfet
Just bought one of these, my oh my, it feels like a new rifle, and I put it in my Nuprol Sopmod too, so it's a wolf in Sheeps clothes!
i want but uk website says no :(
You should be able to get it over here www.redwolfairsoft.com
I have a krytac... will it work with 2 mosfets?
danielxd145 Krytac Gearboxes take a lot of modifications, if your not a pro tech talent to a professional!
danielxd145, you take the factory one out when u install a gate
Is there a version for an ics m4 which has a split gear box?
How many takes did the outro take i wonder?
Is this the basic one or advanced
Does the battery protection work with L-ion batteries
Yes it does
WHERE TO BUY THE TSHIRTS YOU GUYS WEARING??????
Can the titan break the gun internals with bad settings?
What sort of internals is he running with the titan gate ?
if the vector is v2 compatible, can i install it to my vector?
Does this fit in the ics split gearbox system
The day i was going to get the mags for my vityaz theyre out of stock i just want six man is it that hard to ask
Love my titan.
I came when gambit magically summons the box in his hands.
Is it a dsg
where are you guys located..
i want that gun. what is that gun?
That gun has been completely modified. In terms of external, the following are the parts that was used to build that gun:
- G&P Magpul MOE M4 Carbine (FG) (Discontinued)
- RWA Samson Rainier Arms Rail 12.37 inch
- Knight's Armament Airsoft (Madbull) QDC 3-Prong Flash Hider (CW / 14mm+)
- Magpul RVG Rail Vertical Grip 1913 Picatinny - Black (MAG412)
All of those can be found on our online store www.redwolfairsoft.com
thanks man
What is the best noob sniper
my gate controll station dosent even reconize my mosfet??? what do i do
Buy a perun
But does it feed at that rate?
What's in gambit's gun internally?
I own a polar star, thinking of getting this to experiment with. Anyone agree or disagree
I wonder who the power bottom is.
Will this work in an ak? If not is there a good ak mosfet?
The V3 version is released in November, I'm considering buying one for one of my own AK's.
Nice eye pro.
What glasses is Tim wearing?
Can you program it on mobile?
Why a pc and not a app on your phone.
Great vid guys a
nd great end!!!!! Still LOLing!!
Is this the advanced?
That Tim gunny talking that m4 XD
Can anyone tell me if an m4 would need a rear wired one or a front wired one?
I have couple M4...... one of them with front wire, and the other with rear...... I just installed aTitan Mosfet with rear wire on my front wired M4 , of course, I did some modifications on the gearbox and the rifle to make it work.
Active break?
Do you sell chrono machine ?
We do sell chronos, here are the ones that we have available at the moment:
www.redwolfairsoft.com/redwolf/airsoft/AdvanceSearchResult?search=true&productcode=chrono&mode=simple&keyword_search=chrono&productname=chrono&brandId=
Thank you
Wow Quuality of product is one of the bast Close to Intel or asus. tehnology
Tim! What's with the highlights, man your so cool! X
This review is pretty overdue, this and the btc spectre have been out for a few years now.
I'm putting this in a g&p knights armament high speed
I'd throw this into either a DMR, or a SAW/LMG.
Thank God Tim is back! That other guy was boring me to death.....
Tim is pretty cool, but I miss Arclight, he was badass.
got the gate on my scar h, love it is all i can say lol
What else does it do? 0:55 . It can take €130 out of my wallet
That is so 90's I want to have an android app to change the settings for ROF etc.
Look at the Play store and download the titan gate app
Tech here! The Titan Fet is kind of shit tbh. It's lackluster and there are cheaper, smaller, and better options.
What would you recommend?
I would put a bait trigger on it at 100% full auto with pre cock and semi-auto and safe in that order so that semi is on safe. ULTIMATE SPEEDSOFT GUN
Hello redwolf airsoft