This video is sponsored by TSPROF! Meet the MK03 The Ultimate Guided Knife sharpener. This is the END GAME of guided sharpeners! USA: tsprof.us/?ref=lsichytj EU: tsprof.eu
Thanks fellas, I got hosed because of this video! I immediately went and ordered the Boker Vigtig and it showed up today with 1095 steel!!! Not magnacut
I would love for you to do a compilation of the knives which had a 10 rating for the different tasks. You mentioned Lilly’s knife for the fire steel scraping. What was the one that ranked 10 for splitting? What was the one that rated 10 for feather sticking? What was the one rated 10 for pee pee stabbing???
I think it is fine to integrate sponsors, particularly how you did it. You were open about them being a sponsor, what you used and you used it in a real situation. You guys are honest, so no issues.
I appreciated the way you incorporated the sponsor. It was clear without being distasteful. The one thing that fans are always trying to tease out is how much of the reason is sponsorship vs belief in the product. Continue to maintain your authenticity and DBK fans will never doubt your intentions.
I've had this one for a while now and it goes with me on every trek innawoods as a companion knife to my Demko Freereeign (also in Magnacut). This one I paracord-sling-carry on me while the Demko is attached to my pack and it sees a lot of use. Excellent knife. Boker really nailed it with this one.
I've seen chainring bolts used in the past for knifehandles. As they're a very short and broad thread they don't have any stretch to them and so are very prone to vibrating free. The right move is to install them with a thread retention compound like loctite 222 (or 243 if you're less likely to be removing the bolts frequently)- this is how they're installed on bikes.
Looks like a great knife. Enough for almost any bushcraft task while remaining nimble, Magnacut, so say no more. The low scandi on this one, and the ease of sharpening it, as shown, might be also best for the upcoming DBK knife? The integrated sponsor item was nice. Clearly stated as 'sponsored' and immediately put to use, to show what it can do. Nice mirror polish... Sponsor whatever/however, as long as you guys truly appreciate the product.
Thanks for the looks and liked the sponsor integrated into the video, I’m shopping fix angle sharpeners and thought I made my decision but now ??? Great Video MnM😎
I think the only thing I don't like about it is that it's 4mm thick! I prefer knives that can slice well, 2mm is my favorite for scandi. This would be okay with a flat or other grind but scandi AND 4mm is thicker than my axe geometry
I have one and I agree. The 4mm is overkill for this very tough steel, I have a few other scandi ground knives at 3mm thick and they slice so much better
I am glad i already got it a few months prior. It's a great performance and budget small knife. I was comparing the ESEE Sencillo Magnacut and found this Vigtig vs Wild Magnacut and just bought it right away. The only downside is that it is not widely available outside of the German speaking regions.
There is no such thing as the best knife. There are knives that are suitable for a task for different reasons. There is also personal preference, subjective but we humans are not all the same. The Böker Vigtig vs Wild is certainly a good knife, there are certainly people for whom it is personally the best knife, others may find the knife good, but find another knife better.
ive been looking at dave wanger work for a while and when i saw that collab ... i almost shit my pants! i bought 2 of those and for me in my never ending quest for the perfect compact bushcraft knife it end up being my favorite EVER!!!
Just started the video, and watched the part where you mention the nice small sheath and the clip on it do that you don't need a belt. I fully agree!!! One reason I Love mora companions and pro series is that they can clip into anything. Jeans, sweatpants, you can even clip them onto your underwear and go running around nearly naked and still have a knife on you. For me personally, I've really strives to add this to every knife I own. Early basic sheaths, id just create a dangler with a carabiner to easily clip onto your waistband or something. Now though, I've found little Knock off Ulticlips (which I believe is on the knife sheath here) and they are fantastic especially for any kydex sheath. They add so much versatility to a knife and how you carry it. Now the real ulticlip is probably better and more reliable, bit for someone living outside of USA, the knock off is fine and works as intended.
Great video. I would definitely buy that knife at that price. I really like the way you guys integrated the sponsor. Anything TSPROF is an obvious compliment to your video content. That's how it should be done. I would love to see relevant sponsors like this all the time. I mean get your money however you have to do it, unless it negatively affects your channel. You guys invested your lives in your work. You provide amazing content and information. You shouldn't have to end up broke just because you like what you're doing.
That's seems like a great little knife. Integrating the sponsor product seem like a nice addition to me. I liked how you used it to put a mirror polish on the knife, showing what the sharpener could do, and then used the knife after that showing it's sharpness. I thought that was a nice touch. Thanks guys, now I have to save up 165 dollars for this one at the same time I'm saving up 300 Euros for a Malanika Puuko. Sheesh!
The hultafors axe video was one of my favorites, any plans on another bushcrafty axe review? Doing the full suite of bushcraft chores with an axe would be awfully fun. maybe just awful, but fun to watch!
A'aight, so what's the hardness of the Boker Vigtig? The creator of Magnacut stated that it's really important to get that right, and some brands made "Magnacut" knives with a hardness of 59 Rockwell which completely negates all positive Magnacut properties.
Awesome video very sorry for Mikey’s loss 🍌 😂 also the way you introduced the sponsor was pretty smart not only showing it but actually testing it out. Ps will we have more info on the new dbk knife anytime soon
I was looking for two months to buy it but it is sold out since a while... AND NOW YOU MAKE A VIDEO ABOUT IT ? SCREW YOU DBK !!!! PRICE X100, STOCK -10000000000 By the way, Thanks for your work, big fan since 3 years 🤘
Dudes I've been a fan of yall for so long idc if you put sponsored bits in the video. I want you guy to be successful and if that means you have to do tsprof pitches than I'm all for it.
@@DutchBushcraftKnives It's always a good review, even if the knife isn't the greatest. You guys are knowledgeable, I usually end up learning something - and you're hilarious! I end up watching reviews of knives I don’t have a massive amount of interest in because of you guys. I stand by my original comment. 😁
Marteen I noticed you wear skate shoes alot. Check out five ten shoes. They make some mtb shoes and maybe rock climbing if I remember. The mtb shoes look like skate shoes and have the grippiest soles I've ever had. It's unreal the traction they have.
And reading comments about how the price is actually closer to $200 and the knife is not available must be really annoying. Yeah the linked dealer was sold out but I googled the knife and found one in stock for $145 shipped. People are so lazy. Anyway great video and I am sorry people suck.
Really cool Video! Thx for that. I think, its to late to win anything. But great Video and the knife is really sharp. I like sharp knifes in outdoor Tours. Many greets from SALZBURG STADT ... Austria (Sound of Music)
I got the tsprof kadet pro a couple of weeks ago and love it. K03 was too expensive and large for me unfortunately, haha. They have convex attachments too!
I have been a knife fan for over 40 years and have been sharpening knives freehand for decades. I've tested a few systems over the years, but none of them convinced me. I recently bought a Tsprof Kadet Pro and what can I say, I love the system, it is solid, functional and precise. I still do a lot of freehand sharpening, but for example edge reprofiling I use the Tsprof system because it makes the process so much easier and is highly precise.
Got a question for you guys, because I've heard from many people that stropping a scandi is not good. I've done it all my life and had no problem but apparently it morphs the edge or something
More like the Enzo Elver which will not be made anymore 😢Thats what they told me in an email. Such a great knife , maybe NKD will make their own version?
Do comments here get filtered out here, before publication, even if not the least critical of the content, nor out of subject, nor any hatefull or the likes ), but just because it might be considered- what ? Thanks for answers.
Hey You should check out the Grohmann #4 Canadian survival knife Or Grohmann #3 Canadian jump knife Sorry for putting a link to someone else's website last video you posted.
I'd love to see that too! I feel the steel would not do well, but I'd love to see how it does. Love their shapes and that it's made in my country of Canada!
This video is sponsored by TSPROF! Meet the MK03 The Ultimate Guided Knife sharpener. This is the END GAME of guided sharpeners!
USA: tsprof.us/?ref=lsichytj
EU: tsprof.eu
Where is TSPROF manufactured?
Thanks fellas, I got hosed because of this video! I immediately went and ordered the Boker Vigtig and it showed up today with 1095 steel!!! Not magnacut
@@kevinAuman1 there are different versions!
I would love for you to do a compilation of the knives which had a 10 rating for the different tasks. You mentioned Lilly’s knife for the fire steel scraping. What was the one that ranked 10 for splitting? What was the one that rated 10 for feather sticking? What was the one rated 10 for pee pee stabbing???
Haha, 10🙌🏻
TRC apocalypse DBK edition, some Bark River knives with a scandivex grind and Lilly’s knife. If I remember correctly.
Solid idea
Magnacut isn't expensive. It's not hard to work on. There is no reason it has to be only on expensive knives
I think it is fine to integrate sponsors, particularly how you did it. You were open about them being a sponsor, what you used and you used it in a real situation. You guys are honest, so no issues.
When Mickie said stabs his pipi I laughed so loud that my neighbor stood on my doorstep and asked if efrything is okay 😂
I appreciated the way you incorporated the sponsor. It was clear without being distasteful. The one thing that fans are always trying to tease out is how much of the reason is sponsorship vs belief in the product. Continue to maintain your authenticity and DBK fans will never doubt your intentions.
I liked the integration of the sharpening system from your sponsor, great video as always. Thanks
I've had this one for a while now and it goes with me on every trek innawoods as a companion knife to my Demko Freereeign (also in Magnacut).
This one I paracord-sling-carry on me while the Demko is attached to my pack and it sees a lot of use. Excellent knife. Boker really nailed it with this one.
man , i got the same duo 😂 2 of the best knives ever
I've seen chainring bolts used in the past for knifehandles. As they're a very short and broad thread they don't have any stretch to them and so are very prone to vibrating free. The right move is to install them with a thread retention compound like loctite 222 (or 243 if you're less likely to be removing the bolts frequently)- this is how they're installed on bikes.
Looks like a great knife. Enough for almost any bushcraft task while remaining nimble, Magnacut, so say no more.
The low scandi on this one, and the ease of sharpening it, as shown, might be also best for the upcoming DBK knife?
The integrated sponsor item was nice. Clearly stated as 'sponsored' and immediately put to use, to show what it can do. Nice mirror polish...
Sponsor whatever/however, as long as you guys truly appreciate the product.
Thanks for the looks and liked the sponsor integrated into the video, I’m shopping fix angle sharpeners and thought I made my decision but now ??? Great Video MnM😎
I support the sponsors as long as it’s still honest keep it up long time fan
This one checks every box. Well done boker!
Dang no comments and man I love your channel
Just received mine. So far i really like it. I added a fire stelel holder to the sheath.
I just bought one of these as my EDC. What a little beast of a knife.
Thanks DBK boy. Keep 'em coming.
I’ve had a TSProf for around a year now and it’s the best sharpener I’ve ever used. I’m a fan of both DBK and the sponsor.
Dave wenger of Wenger blades makes some amazing models. Boker making them for a bit cheaper has been amazing!
I think the only thing I don't like about it is that it's 4mm thick! I prefer knives that can slice well, 2mm is my favorite for scandi. This would be okay with a flat or other grind but scandi AND 4mm is thicker than my axe geometry
I have one and I agree. The 4mm is overkill for this very tough steel, I have a few other scandi ground knives at 3mm thick and they slice so much better
Good thing the target is small so Mickie missed.
Yeah, and for the price of the MK03 i can buy a car.
I am glad i already got it a few months prior. It's a great performance and budget small knife.
I was comparing the ESEE Sencillo Magnacut and found this Vigtig vs Wild Magnacut and just bought it right away.
The only downside is that it is not widely available outside of the German speaking regions.
There is no such thing as the best knife. There are knives that are suitable for a task for different reasons. There is also personal preference, subjective but we humans are not all the same. The Böker Vigtig vs Wild is certainly a good knife, there are certainly people for whom it is personally the best knife, others may find the knife good, but find another knife better.
Awesome video, can you tell where the grill is sold? best regards!
Just bought one and it is amazing.
ive been looking at dave wanger work for a while and when i saw that collab ... i almost shit my pants!
i bought 2 of those and for me in my never ending quest for the perfect compact bushcraft knife it end up being my favorite EVER!!!
Just started the video, and watched the part where you mention the nice small sheath and the clip on it do that you don't need a belt.
I fully agree!!! One reason I Love mora companions and pro series is that they can clip into anything. Jeans, sweatpants, you can even clip them onto your underwear and go running around nearly naked and still have a knife on you.
For me personally, I've really strives to add this to every knife I own. Early basic sheaths, id just create a dangler with a carabiner to easily clip onto your waistband or something.
Now though, I've found little Knock off Ulticlips (which I believe is on the knife sheath here) and they are fantastic especially for any kydex sheath. They add so much versatility to a knife and how you carry it. Now the real ulticlip is probably better and more reliable, bit for someone living outside of USA, the knock off is fine and works as intended.
Great video. I would definitely buy that knife at that price. I really like the way you guys integrated the sponsor. Anything TSPROF is an obvious compliment to your video content. That's how it should be done. I would love to see relevant sponsors like this all the time. I mean get your money however you have to do it, unless it negatively affects your channel. You guys invested your lives in your work. You provide amazing content and information. You shouldn't have to end up broke just because you like what you're doing.
That's seems like a great little knife. Integrating the sponsor product seem like a nice addition to me. I liked how you used it to put a mirror polish on the knife, showing what the sharpener could do, and then used the knife after that showing it's sharpness. I thought that was a nice touch. Thanks guys, now I have to save up 165 dollars for this one at the same time I'm saving up 300 Euros for a Malanika Puuko. Sheesh!
I really like small Scandinavian ground knives. It seems to be the perfect size for most camp tasks. 🎸🔪
The hultafors axe video was one of my favorites, any plans on another bushcrafty axe review? Doing the full suite of bushcraft chores with an axe would be awfully fun. maybe just awful, but fun to watch!
I like this as a pocket fixed blade. I'll definitely pick one up eventually.
A'aight, so what's the hardness of the Boker Vigtig? The creator of Magnacut stated that it's really important to get that right, and some brands made "Magnacut" knives with a hardness of 59 Rockwell which completely negates all positive Magnacut properties.
I would definitely buy this, and I liked the integrated sponsorship.
Thanks a lot!
Whispering "cause you're worth it" really works !
Thanks!
Awesome video very sorry for Mikey’s loss 🍌 😂 also the way you introduced the sponsor was pretty smart not only showing it but actually testing it out. Ps will we have more info on the new dbk knife anytime soon
Isn't it the knife from 7vs wild? If so there might be a compartment in the handles
Yes its a compartiment
I was looking for two months to buy it but it is sold out since a while... AND NOW YOU MAKE A VIDEO ABOUT IT ? SCREW YOU DBK !!!! PRICE X100, STOCK -10000000000
By the way,
Thanks for your work, big fan since 3 years 🤘
You guys are great at what you do….
Only one thing I’d add….
Start listing credit to your background music.
such epic videos, stoked to see what the future holds for you guys!!!!
That's a great video. I enjoyed it. It was a knife review, product promo, cooking video, and all around fun Home video with family all in one.
Thats a great deal, I can use a bit of locktight on the scales for that price.
ohhh yeah you've done it. I wait for it like two Month, since i wrote you. Thanks for the Testing, it's such a great knive.
Mine gets here Monday!
Dudes I've been a fan of yall for so long idc if you put sponsored bits in the video. I want you guy to be successful and if that means you have to do tsprof pitches than I'm all for it.
Already sold out in the UK, I tried a few weeks ago. Great review lads 👍
you cant know if its great yet hahaha! you're too fast with the comment
@@DutchBushcraftKnives It's always a good review, even if the knife isn't the greatest. You guys are knowledgeable, I usually end up learning something - and you're hilarious! I end up watching reviews of knives I don’t have a massive amount of interest in because of you guys. I stand by my original comment. 😁
Love the Vigtig versus Wild 👍🤩 Is currently my favourite EDC knife 🤠
It looks very similar to another great knife - Brisa Trapper.
But why scandi grind? Quite limited use - mainly wood carving. Looks great though.
For sure for sure over dare , dans de neiger is brace brace over dare
Has anybody been able to see at what angle the knife was sharpened at with the TS Prof?
If you owned this knife for your own use would you make it a scandi-vex? Maybe put it on the WS Ken Onion to achieve this?
I have a Boker neck knife. Awesome lil thing. This bad boy is in my list! Cheers boy's!
I've ordered one to try out.
Nice little do a lot knife! Still curious about Maarten’s watch and watch face
Been watching you guys for awhile. Love you guys
Guyssss we need an online Excel sheet with the knives, their notations and idea of their prices !!! Please !
Marteen I noticed you wear skate shoes alot. Check out five ten shoes. They make some mtb shoes and maybe rock climbing if I remember. The mtb shoes look like skate shoes and have the grippiest soles I've ever had. It's unreal the traction they have.
Thanks a lot for the tip!. I'll definitely take a look
Gotta love a scandi grind, there’s no better around geometry. Or better for processing wood.
A scandi in Magnacut?!? Sign me up!!
i would definitely buy this knife for that price
wcknifes, you really (all) have to check out his knifes.
Great show thank you
Great video guys!!! Like this knife a lot 😊
You guys are awesome! Bought the knife half way through the video. lol 😅
And reading comments about how the price is actually closer to $200 and the knife is not available must be really annoying. Yeah the linked dealer was sold out but I googled the knife and found one in stock for $145 shipped. People are so lazy. Anyway great video and I am sorry people suck.
I had been debating on upgrading my tsprof to the ko3 then you guys bring it out of the shed. Thanks for making my wallet a good bit lighter.
Ohhhh look it, Mickey has fur on his tummy. Just like a baby!
Really cool Video! Thx for that. I think, its to late to win anything. But great Video and the knife is really sharp. I like sharp knifes in outdoor Tours. Many greets from SALZBURG STADT ... Austria (Sound of Music)
I got the tsprof kadet pro a couple of weeks ago and love it. K03 was too expensive and large for me unfortunately, haha. They have convex attachments too!
I have been a knife fan for over 40 years and have been sharpening knives freehand for decades. I've tested a few systems over the years, but none of them convinced me. I recently bought a Tsprof Kadet Pro and what can I say, I love the system, it is solid, functional and precise. I still do a lot of freehand sharpening, but for example edge reprofiling I use the Tsprof system because it makes the process so much easier and is highly precise.
The tsprof has a concave attachment that let's you put concave grinds on any knife. You don't have to wing it :p
I am looking to score one of these thanks to this video. Watch out for the tip!
Got a question for you guys, because I've heard from many people that stropping a scandi is not good. I've done it all my life and had no problem but apparently it morphs the edge or something
Please do a review of a White River knife. The Puko Firecraft is awesome.
High energy no bullshit videos boys, keep it up!
Like the top gear styled intro haha
This is a sick blade design, I've wanted one for a while
Hugs for vid❤ the music❤ and for the teaster Father❤
Try the holzmans line...
I will buy this knife ,when I have the funds also the sharping was great
Love these vidios gents
More like the Enzo Elver which will not be made anymore 😢Thats what they told me in an email.
Such a great knife , maybe NKD will make their own version?
“A knife like this is not made for destruction”. Okay………you know what to do now.
hahahaa
It's a shame Boker heat treatment doesn't optimise this steel's potential 😢
I always miss some better angle vies on the handles
What was the song playing during the batoning?
Great video Bushcraft boys and what great knife. Superb viewing chaps.
That is one great knife I’m impressed with edge retention after the abuse you put it through.i bet mickie won’t do that again 😂
Do comments here get filtered out here,
before publication,
even if not the least critical of the content, nor out of subject, nor any hatefull or the likes ),
but just because it might be considered- what ?
Thanks for answers.
Looks like a great knife for my travels.
Are you planning to switch to Magnacut from Elmax for the DBK Knife? TRC is using Magnacut now.
Limited edition coming this summer 🫣
Magnacut hardened under 62 hrc is crap.. Needs to be above to perform over par'... My two cents, love you guys ❤👍
For 167,95€ available at the moment. Safe some more for a UG tools Tiny in MagnaCut unless you are a sucker for scandi
You can get one for 130 atm
Will we ever see you test the new Fallkniven F1s in Elmax and lam. VGWolf?
Please?❤
Hey
You should check out the Grohmann #4 Canadian survival knife
Or
Grohmann #3 Canadian jump knife
Sorry for putting a link to someone else's website last video you posted.
I have both and i like them a lot
I'd love to see that too! I feel the steel would not do well, but I'd love to see how it does. Love their shapes and that it's made in my country of Canada!
That cut of steak is very popular in Mexico
Music during the meat cooking?
Not the cheapest MagnaCut fixed blade, Böker BFF Packlite is half price, but its smaller, no handlescales, and still a Böker.
The limited edition Goku shirt… was not able to get a good look of the graphic. Where did you get?
Does Dulo have any fighting knives?
Thanks for the upload!
always a great show
Weird nobody mentioned the fact Mikkie turned into a Bonobo half way through lol
Hahahaha
I love mine aswell.