I assume you mean the MAF sensor? The Regina system uses a MAP(Mass air pressure) sensor to measure incoming air. It's basically just plugged straight into the manifold, via a yellow hard vacuum line going to the actual sensor. Which is located on the left hand side right above the brake servo.
Oh, that's the housing for the air temp sensor. I just put the sensor near the left wheel arch, never found a good way to mount it in my boost piping. Would be best if you could install it after the intercooler. @@dqmedia2494
Did you just skip using the air sensor? Gonna turbo my Regina. Don’t see one on your car either at stock location or at the turbo :)
I assume you mean the MAF sensor?
The Regina system uses a MAP(Mass air pressure) sensor to measure incoming air. It's basically just plugged straight into the manifold, via a yellow hard vacuum line going to the actual sensor. Which is located on the left hand side right above the brake servo.
@@HL2MODvideos i mean the one that sits at the same position the maf would in a 940 :)
Oh, that's the housing for the air temp sensor. I just put the sensor near the left wheel arch, never found a good way to mount it in my boost piping.
Would be best if you could install it after the intercooler. @@dqmedia2494
I could. Tho i dont know how I would handle pressure the pressure 🤔