Systainer assortment storage inlay | made with CNC
HTML-код
- Опубликовано: 8 сен 2024
- In this video I show you how I made a inlay for a Systainer with a CNC router and a laser cutter.
Because I do not have my own CNC router or laser cutter, I go to my local makerspace/fablab 'de Kaasfabriek' (cheese factory) which is located in Alkmaar, The Netherlands.
For this Systainer inlay I used a piece of 6 mm birch plywood for the base and a piece of 3 mm birch plywood for the deviders.
video about Systainer inlay for clamps: • Systainer inlay for cl...
video about Systainer inlay for router bits: • Systainer inlay for ro...
Look for more photos of my other projects on my website: www.likewood.nl/
You can follow me on Instagram: @Likewood.nl
#CNCwoodworking
You just schooled me on something I wasn't even aware of. I didn't know there were makerspace/fablabs around. I know I could never afford a CNC or a laser cutter, but I would be willing to pay to create a layout, or join a group to design and/or create layouts. After watching this, I searched and found one close by where you can take classes and use their facility. Thank you for making me aware of this.
Good luck and have fun making!
I guess im randomly asking but does someone know of a tool to get back into an instagram account??
I stupidly lost my password. I love any tips you can give me!
@Marcellus Eli instablaster ;)
@Samson Andre thanks so much for your reply. I found the site on google and Im waiting for the hacking stuff now.
Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Samson Andre it worked and I actually got access to my account again. I'm so happy:D
Thank you so much you saved my account !
I want to thank you so much for posting in your title that the project was done with a CNC. I have nothing against them at all. If I were younger (I’m 73) and made more money (I’m a disable veteran) I would love to tinker around with one especially for my Shaker Box projects. But thats just not the case so thanks again for letting viewers know so they wont be dissapointed
I could feel my eyes grow huge 😳 and my anxiety increase as you poured all your screws into one box!!!
Got to love a good systainer fitout!
0:30 you gave me goosebumps you absolute mad man :)
😮trigger warning. That part needs an NSFW tag.
well done guys
Great video editing. I like your videos and I would like you to make some tutorials about your projects. I think you would be a good master ;-D You have my like for sure. Thanks and best regards from Spain.
This was fun. Thanks! Great music as well :)
I have always liked your designs and I hope you get more subscribers as you deserve them.
This is nice and chilling. Great vid 👍
Very cool!
Great project. I would like to make a similar one. Would you share the plans with us? That would be great
Please contact me via my website and I send you the dxf file by mail. www.likewood.nl/contact_lw.php
very awesome but how long before you knock it all, all over the floor 🤣
Not jet! But I let you know when this happens.
@@Likewood i had a nice selection of different screw in a nice compartmentalised box, needless to say its a big mess now after a visit down on the floar 😠
Heel origineel weer. Leuke projecten maak je! Even uit nieuwsgierigheid: hoe groot is je 'thuiswerkplaats'? Komt er misschien in de toekomst nog eens een 'shop tour'? groeten, Coen
Standaard garage 6 x 3 m. Ik ben wel van plan een shop tour te doen maar dat wordt waarschijnlijk ergens begin volgend jaar. groet, R
Hallo! Zijn deze laserbestanden toevallig ook open source ter beschikking? mvg
Nog niet. Het is wel mijn plan om ze in de toekomst beschikbaar te stellen. Dan komen ze op deze pagina: www.likewood.nl/prj/Downloads/LW_downloads.php
@@Likewood super, bedankt!