AEM digital racing dash display: bit.ly/D4Acddash Support d4a: driving-4-answers-shop.fourthwall.com/ Blue engine damper kit for all Nissan S13: amzn.to/2wBNksZ 4 to 5 Lug Wheel Bearing Conversion Hub for S13/S14: amzn.to/2wBNwsd Amazon turbo: amzn.to/2VLGnQR SR20DET turbo lines: amzn.to/38tXWaT Get the shirt: teespring.com/en-GB/d4a-merch
sorry to be offtopic but does someone know of a method to get back into an Instagram account?? I was stupid forgot the account password. I would appreciate any help you can give me.
Back in the 90's and early 2000's EVERYONE was swapping OUT the ka24de for the SR20DET ... I stayed with the ka24de, built it and turbo charged it. Got it to 482 whp and 455 wtq in 2001. Ran 11.1 @ 123 mph ... She impressed all but yet everyone still wanted that tiny SR20 ... I guess they didn't want to do all the hard work. She is still in my garage running STRONG 20 yrs later on the same ka motor. Parked next to my MKIV Supra. Funny when i take it to the car meets and pop the hood, they are like, oh you went ka turbo, i said yea, they asked how long has it been turbo, i say 20 yrs now and they look at me with that look of .... 20 yrs are you serious ... I was like yep, got the car in 2000, pulled the engine in 2001, built it for 600 hp and she has been this way since.
Me and my friends have swapped them into old mercedes 190e couple of times. Reliable and cost effective way to get 200-300hp 4 door, that doesn't weigh that much and with suspension upgrades, can deliver suprisingly great performance.
@@802Garage 190e is a great platform, but the standard models had pretty anemic engines and the sportier models are too expensive, so I think it's a great swap to go from an iron block 1.8l 8v, into sr20det with all the aftermarket it has, which the mercedes engines lack unfortunately.
Couple of notes and interesting facts: Camshaft durations and lift vary from 232 to 248 depending on the variation. S14 Nothctop had t28 non bb garrett turbo, not t25. Pushing stock internals to 400whp is possible, but 320-370whp is a more realistic number. On stock t25 (@~12 psi) and very minor bolt-ons you can get solid 240-250whp. Also, rockers and lifters really hate being bounced off the limiter, hence why SR is kinda known for being unreliable. Some people say rocker arms stoppers are great and some say they destroy the heads so here's that. The ultimate SR20DET upgrade is P11 NEO VVL head swap. They flow better and are pretty much bulletproof with a few bolt-ons. Yes it is a very expensive mod, but it really transforms SR20DET into an indestructible beast. Some people prefer to keep stock high port (blacktop and redtop) mani for better low-end torque. Alternators and water pumps are kinda known to go out. SRs and other 90s nissan engines LOVE 15w40 diesel oils. Stock crank can handle up to 1400hp with good balancing. A faulty water temp sensor will make the ECU go into the limp mode and won't rev past 2500rpm. s13.4 Notchtop/Redtop hybrid valve cover is an odd mod but if you have a S13 SR, and you have an oil catch can… you’ve probably seen your catch can fill up before the day is even over. This is due to no internal baffling in the S13 SR valve cover. S14 SR valve cover does have internal baffling, which prevents all of the oil to just end up in the catch can.
Made 462whp on mine, completely (second motor, why is below) stock motor other than C16 fuel, GT35R, 72lb injectors, Cobra MAF, JWT S4 cams and a monster oil cooler ran by an electric pump. Lasted a couple of seasons doing time attack events. Rev limiter at 7750rpm on the JWT ECU. Rocker stoppers keep the valves moving during float so you can get piston to valve contact. Better to huck them out. Had a friend money shift mine 4th at redline to second. Put a new chain and rocker arms in it and ran it until I blew it up playing with the dial-a-boom (25psi isn’t tolerated, lol). Motor is still kicking today, but sadly I haven’t registered the car in years. Someday… :)
I like the longer ones that you've done previously because of the detail.of the engine. However I'm sure there's only a small part of your audience that cares about exhaust and intake valve sizes and bore dimensions etc. However, I prefer it. You could skip somethings like level one mods etc. As we all know what those are. However, things like generally safe horsepower before replacing with forged interns great info that most people are too lazy to scour the internet for. Hopefully, this will help with all the "how much horsepower can I get on a stock block?" Forum posts...ofc I might be too optimistic lol
I like the longer ones better since it gives more information than i could read in 2 minutes or so on wikipedia, this video is just the bare minimum information about it.
Lol ricer Miata has been running between 23 and 30 psi on his stock SR for years and he beats the ever living hell out of it 😂 so those SR's might be indestructible
Thanks for the inspirational video. I'm the original owner of a 91-240SX SE Fast back (manual shift). All original parts with about 280K on the engine. Still runs like a clock! When I'm on the freeway, I'm often amazed at how smooth it runs. I've been thinking about swapping the engine to get a few more horsies out of it but been very reluctant to mess with anything since it's runs with no issues, although it does feel a little sluggish. I'm now 55 and its obviously not my daily driver. But still, your video has inspired me to upgrade the original 155hp power plant. Will let you know how it goes!
Love your channel! You've made me dig into my favourite book again, Performance automotive engine math by John Baechtel. Although judging by your content, you've probably written a book just like it. It's a great resource for understanding engines properly. Keep up the awesome content!
Hey man, You got me bro. Subscribed! I first saw and commented on Your MR2 videos since thats the car that really inspired me to love more then just v8's. As far as the SR20DET goes I bought a 95 240 that had a sr20det swap and was already all done up..I did have to put in a new built 5 speed and 2 weeks after I had it finished (car was perfect!!) an old lady totalled it in the WALMART parking lot 😕😕 Man Ive been bummed ever since..Insurance screwed me and only gave me book value. Anyways. YesSSS NISSAN PLEASE GIVE US AN ENTRY LEVEL REAR WHEEL DRIVE S-CHASSIS-LIKE CAR AGAIN!!!!!
Awesome video! I've had 6 cars with this engine: P11, 2 x P11-144, S14 and 2 x S15. I know it well and it's very easiy to tune. A totally stripped out S15 running 300whp is crazy fast and bloody scary. I think we got my last one down to around 900Kg.
Great videos my man! Here in the US our all-powerful insurance industry and trial-lawyer lobbies got involved, and we got the 240SX which basically had a 12-valve SOHC truck engine - felt fast off the line but petered out rapidly as revs rose. Great handling car which needed about 75-100 more bhp. Apart from the lawyers, one reason US-market cars have lower compression ratios is due to our generally crappy fuels, ethanol blends, &c. And to think that us Yanks invented 110-octane gas. Sigh....
I saw that avatar of yours and started panicking. But then! Relief! Sweet, sweet, relief. What will I do with all this newly gained free time? A quiet evening? A light dinner? Maybe even a book? Oh no.... I'm getting greedy.
Factory boost level for the redtop/blacktop motors was 12psi that was gated back to roughly 7psi in higher RPMs by a vacuum controlled boost solenoid. when the boost solenoid is removed, the spring on the T25s wastegate is only rated to 7psi.
I can’t imagine how sick it would’ve been if the 91 Sentra SE-R had received an SR20-DET instead of merely getting the SR20DE. It was still a great car, but with the turbo version it would’ve been awe-inspiring, especially in the early 90’s.
Anyone else noticing their utube "recommended" tab is now full of the previous weeks featured engine? 50K followers is like the moon pulling a high tide of interesting car stuff along with it.
For the most part yea, this engine is a monster and reliable. People who complain they blow up just do not do any maintenance they require. Really the only thing wrong is they do not like bouncing off rev limiter hard because of rocker arms tendency to want to fly. But my SR20DE(T) is still kicking along, still the original bottom end DE from 91 pushing 15psi of boost.
Car: ’05 Nissan Silvia S15 Engine: SR20 Driver: Muhammed Ali allahu akbar 1/4 Best ET: 6.228 @ 226.81 MPH Track: Orlando Speed World Date: Oct 27, 2018 Status: Active The driver of this Nissan S15 is Muhammad Ali, and his ride is the quickest and fastest SR20-powered ride on the planet. He has some badass people helping him make things happen and he does a great job behind the wheel as well. MazWorx built and tuned the chassis to the SR20, which cranked out over 1,800 horsepower on the dyno at 60 pounds of boost. Legendary tuning guru Shane Tecklenburg handles the tuning of the car and you can tell it’s got his stamp all over it, running both ridiculously quick and consistent, which shows the tune is near perfect and they aren’t just taking stabs at the parameters to see what works. Anybody who knows anything about Shane T knows his rides are consistently quick like this and shatter records regularly, proof that he’s the man in the tuning world. The numbers the car puts up at almost perfectly on par with NHRA Pro Stock, allowing me the opportunity to make a comparison between the drastically different combinations. Pro Stock rules, as most of you know, mandate naturally aspirated powerplants, while this SR20 is crammed with almost 70 pounds of boost at speed on the track. Of course, it has half of the cylinders of the 500 CID V8 under the hood of a Pro Stocker, which makes around 1,500 horsepower. So how does the Pro Stocker run the same ET with less horsepower? The answer is contained within the interview with Mark from MazWorx, who talks about the chassis. See if you guys can determine the difference and let us know what you think.
May, I sugest that for the next iconic engine we vote for it. You can simply give us a few choices, create a poll on YT and we vote. How does that sound?
Again great video. I personal like longer videos Very good idea to show a AEM product in details for advertisment. Still asking for the Ford Pinto, Zetec S and the Duratec/MZR. Have a good time
The last y most powerful evolution was the sr20vet 8h6 equipped in the Xtrail GT. 300 hp from factory and Neovvl system (Nissan’s equivalent of Honda’s VTEC)
You should make a video of all the sr20 variants. This video is only based on the rwd sr20det. The DET is outdated (but still good) there's an sr20VET which is the latest entry in the sr20 engines.
Had a highport N/A jdm sr20 (back when they were still $400 delivered off eBay) in a nx2000 I can attest to it's durability. I had a reputation in town for being the guy who had a nitrous nx2000. Which it never did have it . I never could convince anyone that yes this little car pulls that hard without a bottle. Lost the number 3 rod bearing at 275k It earned every mile
I bought my s14a 7 years ago and still running same engine and box I bought it with, had a lot of drifting abuse for the past 5/6 years but if you look after them (like anything really) they can last a long time!
You dont mention the SR20VE (T), which resolve the common rocker arm failing issue at hight RPM. Plus the VE head have better airflow than a max out ported VTC head (and more RPM for fun.
@@otis3500 if you start from the one and only SR20VET from Factory (xtrail) it's quite easy to go from 280 to 350+HP. Just a mater of bigger injectors, maybe better intercooler, exhaust and a tunable ecu. But you have to know that this particulary SR20 block is FWD only like the primera one. So most of the time you need to swap the VE head on the DE rwd block, its extra work and cost.
It was weird hearing you didn't talk about the fact that sr is a very top end engine and one of the main upgrades to actually drift it is a clutch because you going to use it a lot. Also, shame, you didn't mention the only person who still uses sr in pro drift successfully.
wow...didn't know you could get aprox 400 hp from this engine using parts of the era, if we narrow the time up to 2002, how much hp would be possible from an SR20 DET while still being relatively safe/reliable
Debt. In Australia from when it was released we pronounced it SR20 DEBT (minus the B) as opposed to D.E.T. just to add to the history of the engine. Cool video.
Sadly and unjustly it's largely forgotten. But mostly due to the fact that it's truly rare or non-existent in most of the world, it never went global in the sense of some other more popular Nissan engines.
@@d4a I cant blame Nissan for that. It was a high cost affair for them, but in the end it was too generous to send out fjs not only in skyline but silvias too. They had it all to compete even against 4wd cars in group b as they had it also in turbo trim. But to develop an awd system to stay competitive was maybe too much on coin i think. They did it anyway after that.
Car: ’05 Nissan Silvia S15 Engine: SR20 Driver: Muhammed Ali allahu akbar 1/4 Best ET: 6.228 @ 226.81 MPH Track: Orlando Speed World Date: Oct 27, 2018 Status: Active The driver of this Nissan S15 is Muhammad Ali, and his ride is the quickest and fastest SR20-powered ride on the planet. He has some badass people helping him make things happen and he does a great job behind the wheel as well. MazWorx built and tuned the chassis to the SR20, which cranked out over 1,800 horsepower on the dyno at 60 pounds of boost. Legendary tuning guru Shane Tecklenburg handles the tuning of the car and you can tell it’s got his stamp all over it, running both ridiculously quick and consistent, which shows the tune is near perfect and they aren’t just taking stabs at the parameters to see what works. Anybody who knows anything about Shane T knows his rides are consistently quick like this and shatter records regularly, proof that he’s the man in the tuning world. The numbers the car puts up at almost perfectly on par with NHRA Pro Stock, allowing me the opportunity to make a comparison between the drastically different combinations. Pro Stock rules, as most of you know, mandate naturally aspirated powerplants, while this SR20 is crammed with almost 70 pounds of boost at speed on the track. Of course, it has half of the cylinders of the 500 CID V8 under the hood of a Pro Stocker, which makes around 1,500 horsepower. So how does the Pro Stocker run the same ET with less horsepower? The answer is contained within the interview with Mark from MazWorx, who talks about the chassis. See if you guys can determine the difference and let us know what you think.
@@オッさんタイプXの日産に乗る that Tekno Toyz SR20 makes a lot more power now. Almost 3000hp. And for more than a year the car held the mph record for 4 cylinder drag cars at 229.50mph. We know the SR20 is a beast. #SRFORLIFE
It's so interesting for me to know about Japanese engines from 90s, they are great. I spend my times on German engines from that era. I like to know your opinion on some of them like M112 and M113. I think they're the most reliable engine from Germany. there are some around here on W203 and W211 chassis with about 600K km to 800k km without any major repair...
AEM digital racing dash display: bit.ly/D4Acddash
Support d4a: driving-4-answers-shop.fourthwall.com/
Blue engine damper kit for all Nissan S13: amzn.to/2wBNksZ
4 to 5 Lug Wheel Bearing Conversion Hub for S13/S14: amzn.to/2wBNwsd
Amazon turbo: amzn.to/2VLGnQR
SR20DET turbo lines: amzn.to/38tXWaT
Get the shirt: teespring.com/en-GB/d4a-merch
Hey, Please do a video on the Nissan A14s!
Hi, I'm Jarred from Cape Town South Africa. Is it possible for you to make a video on the Mazda 323 GTX FE 2.0 16v turbo please?
H22 review
sorry to be offtopic but does someone know of a method to get back into an Instagram account??
I was stupid forgot the account password. I would appreciate any help you can give me.
@Alden Leo Instablaster ;)
A great follow up to this would be a video about its predecesor that you mentioned the CA18DET
Back in the 90's and early 2000's EVERYONE was swapping OUT the ka24de for the SR20DET ... I stayed with the ka24de, built it and turbo charged it. Got it to 482 whp and 455 wtq in 2001. Ran 11.1 @ 123 mph ... She impressed all but yet everyone still wanted that tiny SR20 ... I guess they didn't want to do all the hard work.
She is still in my garage running STRONG 20 yrs later on the same ka motor. Parked next to my MKIV Supra.
Funny when i take it to the car meets and pop the hood, they are like, oh you went ka turbo, i said yea, they asked how long has it been turbo, i say 20 yrs now and they look at me with that look of .... 20 yrs are you serious ...
I was like yep, got the car in 2000, pulled the engine in 2001, built it for 600 hp and she has been this way since.
You Tube
Voce fala muito cara. Por que você não mostra esse motor rodando?
@@marydudaduda7355🤦
going on over 10 years (trouble free) on my lightly moded daily driven sr20det , the day will come when i will crack it open inspect it and rebuild it
Where are you from
Good luck with that man
I’m on approximately 8 years trouble free
One of my favorite engines. Closed deck aluminum with a timing chain, solid internals stock, what's not to like? Great videos man!
yes, my favourite part is the rocker arms. very good
Me and my friends have swapped them into old mercedes 190e couple of times. Reliable and cost effective way to get 200-300hp 4 door, that doesn't weigh that much and with suspension upgrades, can deliver suprisingly great performance.
@@TheSpekkel1 That's pretty awesome! Not a swap I would expect.
@@802Garage 190e is a great platform, but the standard models had pretty anemic engines and the sportier models are too expensive, so I think it's a great swap to go from an iron block 1.8l 8v, into sr20det with all the aftermarket it has, which the mercedes engines lack unfortunately.
@@TheSpekkel1 Makes sense to me!
Couple of notes and interesting facts:
Camshaft durations and lift vary from 232 to 248 depending on the variation. S14 Nothctop had t28 non bb garrett turbo, not t25. Pushing stock internals to 400whp is possible, but 320-370whp is a more realistic number. On stock t25 (@~12 psi) and very minor bolt-ons you can get solid 240-250whp. Also, rockers and lifters really hate being bounced off the limiter, hence why SR is kinda known for being unreliable. Some people say rocker arms stoppers are great and some say they destroy the heads so here's that.
The ultimate SR20DET upgrade is P11 NEO VVL head swap. They flow better and are pretty much bulletproof with a few bolt-ons. Yes it is a very expensive mod, but it really transforms SR20DET into an indestructible beast.
Some people prefer to keep stock high port (blacktop and redtop) mani for better low-end torque.
Alternators and water pumps are kinda known to go out.
SRs and other 90s nissan engines LOVE 15w40 diesel oils.
Stock crank can handle up to 1400hp with good balancing.
A faulty water temp sensor will make the ECU go into the limp mode and won't rev past 2500rpm.
s13.4 Notchtop/Redtop hybrid valve cover is an odd mod but if you have a S13 SR, and you have an oil catch can… you’ve probably seen your catch can fill up before the day is even over. This is due to no internal baffling in the S13 SR valve cover. S14 SR valve cover does have internal baffling, which prevents all of the oil to just end up in the catch can.
Антон заходи к нам на канал у нас сувенир avenir salut x gt
1996 sr20det
Still a nissan ssdly
S14 Sr20det came with a T28 only in the late model kouki. The Zenki version still came with t25
@@joesarna9154 i have a euro spec 200sx zenki and it does have a journal bearing T28, the jap spec s14 came with the bb T28
Made 462whp on mine, completely (second motor, why is below) stock motor other than C16 fuel, GT35R, 72lb injectors, Cobra MAF, JWT S4 cams and a monster oil cooler ran by an electric pump. Lasted a couple of seasons doing time attack events. Rev limiter at 7750rpm on the JWT ECU.
Rocker stoppers keep the valves moving during float so you can get piston to valve contact. Better to huck them out. Had a friend money shift mine 4th at redline to second. Put a new chain and rocker arms in it and ran it until I blew it up playing with the dial-a-boom (25psi isn’t tolerated, lol).
Motor is still kicking today, but sadly I haven’t registered the car in years. Someday… :)
Do you prefer longer Iconic Engines videos or shorter more condensed ones like this one?
Edit: Noted! We are staying with the longer format.
I like the longer ones that you've done previously because of the detail.of the engine. However I'm sure there's only a small part of your audience that cares about exhaust and intake valve sizes and bore dimensions etc. However, I prefer it.
You could skip somethings like level one mods etc. As we all know what those are. However, things like generally safe horsepower before replacing with forged interns great info that most people are too lazy to scour the internet for. Hopefully, this will help with all the "how much horsepower can I get on a stock block?" Forum posts...ofc I might be too optimistic lol
I like these long ones
I like the longer ones better since it gives more information than i could read in 2 minutes or so on wikipedia, this video is just the bare minimum information about it.
Longer ones.
Longerr
Been pumping out some great content man
After so long i finally got an Sr20de. This video really inspired this soon to be build
Lol ricer Miata has been running between 23 and 30 psi on his stock SR for years and he beats the ever living hell out of it 😂 so those SR's might be indestructible
Thanks for the inspirational video. I'm the original owner of a 91-240SX SE Fast back (manual shift). All original parts with about 280K on the engine. Still runs like a clock! When I'm on the freeway, I'm often amazed at how smooth it runs. I've been thinking about swapping the engine to get a few more horsies out of it but been very reluctant to mess with anything since it's runs with no issues, although it does feel a little sluggish. I'm now 55 and its obviously not my daily driver. But still, your video has inspired me to upgrade the original 155hp power plant. Will let you know how it goes!
The believe you can do it part had me cracking up, those little funny short clips are really good
Love your channel! You've made me dig into my favourite book again, Performance automotive engine math by John Baechtel. Although judging by your content, you've probably written a book just like it. It's a great resource for understanding engines properly. Keep up the awesome content!
Pulsar gtir. Weapon from the gods. Baby Godzilla. Such an insane beast.
Rather have an evo to be honest
the amount of research you do is crazy and i appreciate it
Iv actually seen sr20s online with about a 1000 horsepower but they are actually very rare engine so good luck finding one of those things man
Heres a street driven one with 1400hp ruclips.net/video/1eG6HDET4Fo/видео.html
You're great bruh! Keep 'em videos coming...
Hey man, You got me bro. Subscribed! I first saw and commented on Your MR2 videos since thats the car that really inspired me to love more then just v8's. As far as the SR20DET goes I bought a 95 240 that had a sr20det swap and was already all done up..I did have to put in a new built 5 speed and 2 weeks after I had it finished (car was perfect!!) an old lady totalled it in the WALMART parking lot 😕😕 Man Ive been bummed ever since..Insurance screwed me and only gave me book value.
Anyways. YesSSS NISSAN PLEASE GIVE US AN ENTRY LEVEL REAR WHEEL DRIVE S-CHASSIS-LIKE CAR AGAIN!!!!!
Awesome video! I've had 6 cars with this engine: P11, 2 x P11-144, S14 and 2 x S15. I know it well and it's very easiy to tune. A totally stripped out S15 running 300whp is crazy fast and bloody scary. I think we got my last one down to around 900Kg.
P11? Infiniti?
Primera 💪 still miss my GT Mystic
Great videos my man!
Here in the US our all-powerful insurance industry and trial-lawyer lobbies got involved, and we got the 240SX which basically had a 12-valve SOHC truck engine - felt fast off the line but petered out rapidly as revs rose. Great handling car which needed about 75-100 more bhp.
Apart from the lawyers, one reason US-market cars have lower compression ratios is due to our generally crappy fuels, ethanol blends, &c. And to think that us Yanks invented 110-octane gas. Sigh....
I had a '91 240SX in 1998 when I was 16, I remember scouring the early internet dreaming of buying and swapping an SR20 into it
Hey man, no questions for today so have a great one dude!
I saw that avatar of yours and started panicking. But then! Relief! Sweet, sweet, relief. What will I do with all this newly gained free time? A quiet evening? A light dinner? Maybe even a book? Oh no.... I'm getting greedy.
driving 4 answers 😂😂😂
Just noticed this in my feed and was pleasantly surprised seeing the now infamous Streeter street session footage
Thanks for bringing us yet another vibe 🥂 enjoyed
Really good stuff man! These videos are killin' it.
Factory boost level for the redtop/blacktop motors was 12psi that was gated back to roughly 7psi in higher RPMs by a vacuum controlled boost solenoid. when the boost solenoid is removed, the spring on the T25s wastegate is only rated to 7psi.
I can’t imagine how sick it would’ve been if the 91 Sentra SE-R had received an SR20-DET instead of merely getting the SR20DE. It was still a great car, but with the turbo version it would’ve been awe-inspiring, especially in the early 90’s.
Anyone else noticing their utube "recommended" tab is now full of the previous weeks featured engine? 50K followers is like the moon pulling a high tide of interesting car stuff along with it.
Great little engines
ive got a SR2DE in my 1996 Nissan Primera P11 SRI, great engines!
#bringbacktheschassis
For the most part yea, this engine is a monster and reliable. People who complain they blow up just do not do any maintenance they require. Really the only thing wrong is they do not like bouncing off rev limiter hard because of rocker arms tendency to want to fly. But my SR20DE(T) is still kicking along, still the original bottom end DE from 91 pushing 15psi of boost.
Sr20det gets really good smiles per gallon
If you haven't done so, maybe a video explaining the VQ35DE or VQ Family Nissan Engines. Thanks for the great informative videos!!
I took a shot every time I heard the word iconic... I got much drunk.
Thank u so much I was looking for a video about the sr20det u rock bro🤯🙏🤘😌😌
Amazing video as usual🙏🙏🙏
Do long iconic engine on the rb26dett and 1jz/2jzgte and your channel will will blow up the internet
Nice video. To bad you didn't catch the whole SR range though.
SR20DE, SR20VE, SR16VE, etc.
Car: ’05 Nissan Silvia S15
Engine: SR20
Driver: Muhammed Ali allahu akbar
1/4 Best ET: 6.228 @ 226.81 MPH
Track: Orlando Speed World
Date: Oct 27, 2018
Status: Active
The driver of this Nissan S15 is Muhammad Ali, and his ride is the quickest and fastest SR20-powered ride on the planet. He has some badass people helping him make things happen and he does a great job behind the wheel as well. MazWorx built and tuned the chassis to the SR20, which cranked out over 1,800 horsepower on the dyno at 60 pounds of boost. Legendary tuning guru Shane Tecklenburg handles the tuning of the car and you can tell it’s got his stamp all over it, running both ridiculously quick and consistent, which shows the tune is near perfect and they aren’t just taking stabs at the parameters to see what works. Anybody who knows anything about Shane T knows his rides are consistently quick like this and shatter records regularly, proof that he’s the man in the tuning world.
The numbers the car puts up at almost perfectly on par with NHRA Pro Stock, allowing me the opportunity to make a comparison between the drastically different combinations. Pro Stock rules, as most of you know, mandate naturally aspirated powerplants, while this SR20 is crammed with almost 70 pounds of boost at speed on the track. Of course, it has half of the cylinders of the 500 CID V8 under the hood of a Pro Stocker, which makes around 1,500 horsepower.
So how does the Pro Stocker run the same ET with less horsepower? The answer is contained within the interview with Mark from MazWorx, who talks about the chassis. See if you guys can determine the difference and let us know what you think.
agreed! less talking about drifting and more talking about the varieties of SR family.
A vw beetle type1 engine has run the 1/4 in 6s at over 220mph.
Oh, and it was n/a.
Just food for thought.
Great video, would love to see video on the ca18det!
I had two 200SX S14a 15 years ago.... wish I had kept hold of them!
Haha that’s awesome you used a pic of my car for the end of s15.
Great video as usual cheers
GTI-R version has solid lifters
Great video, I love this.
Can you cover the Scandinavian iconic motor, the Volvo red block like b230fk? 😁
May, I sugest that for the next iconic engine we vote for it.
You can simply give us a few choices, create a poll on YT and we vote.
How does that sound?
I did that once. That's the order I based my 2nd, 3rd, and 4th videos on. I might do it again, we'll see.
Polls suck
Again great video.
I personal like longer videos
Very good idea to show a AEM product in details for advertisment.
Still asking for the Ford Pinto, Zetec S and the Duratec/MZR.
Have a good time
Thank you! Mzr will be covered definitely, can't tell yet when but it gets requested occasionally.
Great video BuD.thank u!!!
Good job even listening to you relaxes me a bit. No weird stuff lol.
Nice video man! Subscribed
nice video bro
Make a rotary video... love your videos
Great content! I own a stock unicorn s13 in pristine condition. Don’t plan on drifting it! No bolts or screws on the body either!
I have a stock S14 Kouki Unicorn
. Lol
Thanks for this video...helped alot
The last y most powerful evolution was the sr20vet 8h6 equipped in the Xtrail GT. 300 hp from factory and Neovvl system (Nissan’s equivalent of Honda’s VTEC)
Короче склифосовский!!
lovly video... need to talk about SR20VE...
the s-sexy had me so good hahaha didn't see that one coming
Love the vids man, keep them up!
I cant see the link to the hi res Table anywhere?
Great video !
The rap killed me, lol. Thanks as always for the video
You should do Iconic engines with small engines like briggs and Stratton Predator engines and how they changed go carting
SR20DET is cool, but SR20VET is where it's at!
You should make a video of all the sr20 variants. This video is only based on the rwd sr20det. The DET is outdated (but still good) there's an sr20VET which is the latest entry in the sr20 engines.
Had a highport N/A jdm sr20 (back when they were still $400 delivered off eBay) in a nx2000
I can attest to it's durability. I had a reputation in town for being the guy who had a nitrous nx2000. Which it never did have it . I never could convince anyone that yes this little car pulls that hard without a bottle.
Lost the number 3 rod bearing at 275k
It earned every mile
the na sr20de is extremely different than the sr20det
U have to make an engine review for H22...
Overheats
.
Great video ! But i'm pretty sure the sr20 has nicasil coating instead of steel liners
I bought my s14a 7 years ago and still running same engine and box I bought it with, had a lot of drifting abuse for the past 5/6 years but if you look after them (like anything really) they can last a long time!
Please do 1JZ or JZ series!
THIS GUY LOOKS LIKE THE FERRARI PARKING GARAGE GUY FROM THE MOVIE FERRIS BULLER
Do a RB iconic engine
I thought you would mention the VET aswell..
Thats a head conversion
@@robertlund5694 there is a stock SR20VET in the nissan xtrail it makes 280hp at the crank
N1 SR16VE too.
8 fuel injectors. Top and side feed.
Hey there bud you should definitely do a video on VQ35DE
You dont mention the SR20VE (T), which resolve the common rocker arm failing issue at hight RPM. Plus the VE head have better airflow than a max out ported VTC head (and more RPM for fun.
Hey, I'd like some information on the sr20vet, like what needs to be done to get from 280hp 350+whp.
@@otis3500 if you start from the one and only SR20VET from Factory (xtrail) it's quite easy to go from 280 to 350+HP.
Just a mater of bigger injectors, maybe better intercooler, exhaust and a tunable ecu.
But you have to know that this particulary SR20 block is FWD only like the primera one. So most of the time you need to swap the VE head on the DE rwd block, its extra work and cost.
@@LMSCa18det I actually put it in a 2010 4wd Hyundai Santa Fe, it's a sweet project. Just need more power.
I don't know if you did already, but do one on the vr6!
Haven't yet, will do.
Sr20det is an ok engine love nissan jdm engines had my best luck from the rb20/25det engines tho.
It was weird hearing you didn't talk about the fact that sr is a very top end engine and one of the main upgrades to actually drift it is a clutch because you going to use it a lot. Also, shame, you didn't mention the only person who still uses sr in pro drift successfully.
Tonnes of people still use sr , who cares about pro!
wow...didn't know you could get aprox 400 hp from this engine using parts of the era, if we narrow the time up to 2002, how much hp would be possible from an SR20 DET while still being relatively safe/reliable
Safe.
What a funny word.
That only has what meaning you give to it.
Are you safe right now?
That’s for each own to decide.
Would love to hear what you have to say about Nissan’s VQ series of engines.
VQ is coming too
@@d4a how soon
So...were just not gonna talk about the rocker arms going space shuttle status at redline??
15:38?
Debt. In Australia from when it was released we pronounced it SR20 DEBT (minus the B) as opposed to D.E.T. just to add to the history of the engine. Cool video.
in Australia you guys also say nissin instead of nissan and GDR instead of GTR 😂
@@frnvito ok “Neesun” lover
@@Fredrick656 never heard that one before, i prefer to pronounce it correctly 😅
Can you please do Nissan RB 20 25 and 26 series as well
the RB series next?
Randy_bosss vg
please make a video on rotary engine and coyote engine..
Zayed G R do u wanna see the most unreliable engine?
10B Rew from the RX7 FC3S is what I would like to see.
Can you do a video on the mivec evo x engine plzz
Sadly no one ever mentions the FJ engine and what it proved on the oz racing scene.
There will be a video on the FJ as well
@@d4a Would be great. No one every did a detailed video on that before.
Sadly and unjustly it's largely forgotten. But mostly due to the fact that it's truly rare or non-existent in most of the world, it never went global in the sense of some other more popular Nissan engines.
@@d4a I cant blame Nissan for that. It was a high cost affair for them, but in the end it was too generous to send out fjs not only in skyline but silvias too. They had it all to compete even against 4wd cars in group b as they had it also in turbo trim. But to develop an awd system to stay competitive was maybe too much on coin i think. They did it anyway after that.
Can you please do a detailed video on the sr20vet?
He he, you are funny. I always have a smile on my face when you rap.
Ditch the rap session man. Really loved the video though.
Its more reliable than rb26 right
Can you Review the 13b Rotary engine and compare it to the Sr20det like what's the best engine between this two in drifting of hill climbing
13b is getting a video next Sunday
4:30 RB20
Shows: RB26
Good eye. Couldn't find a nice pic of Rb20 sadly. So I thought, ah nobody's gonna notice. Guess I was wrong.
@@d4a You can never be too sure no one would notice it
I said do the CA18DET dammit!!
Car: ’05 Nissan Silvia S15
Engine: SR20
Driver: Muhammed Ali allahu akbar
1/4 Best ET: 6.228 @ 226.81 MPH
Track: Orlando Speed World
Date: Oct 27, 2018
Status: Active
The driver of this Nissan S15 is Muhammad Ali, and his ride is the quickest and fastest SR20-powered ride on the planet. He has some badass people helping him make things happen and he does a great job behind the wheel as well. MazWorx built and tuned the chassis to the SR20, which cranked out over 1,800 horsepower on the dyno at 60 pounds of boost. Legendary tuning guru Shane Tecklenburg handles the tuning of the car and you can tell it’s got his stamp all over it, running both ridiculously quick and consistent, which shows the tune is near perfect and they aren’t just taking stabs at the parameters to see what works. Anybody who knows anything about Shane T knows his rides are consistently quick like this and shatter records regularly, proof that he’s the man in the tuning world.
The numbers the car puts up at almost perfectly on par with NHRA Pro Stock, allowing me the opportunity to make a comparison between the drastically different combinations. Pro Stock rules, as most of you know, mandate naturally aspirated powerplants, while this SR20 is crammed with almost 70 pounds of boost at speed on the track. Of course, it has half of the cylinders of the 500 CID V8 under the hood of a Pro Stocker, which makes around 1,500 horsepower.
So how does the Pro Stocker run the same ET with less horsepower? The answer is contained within the interview with Mark from MazWorx, who talks about the chassis. See if you guys can determine the difference and let us know what you think.
@@オッさんタイプXの日産に乗る that Tekno Toyz SR20 makes a lot more power now. Almost 3000hp. And for more than a year the car held the mph record for 4 cylinder drag cars at 229.50mph. We know the SR20 is a beast. #SRFORLIFE
@@オッさんタイプXの日産に乗る im pretty sure the s15 ended production in 2002.
@@classys-chassis6433 2020 SR20 shitting 3000hp
What about the sr20 vet...didnt hear any mentions on it or did i miss it ??? ??????
#SR20FORLIFE
that chart has some wrong info from what I can see on the s14+s15 specs.
Oh, Silvia S15 SR20DET dream car
Same but I feel like it should have come with something better than the sr20 but not as good as the 1jz, like a weaker vr38
It's so interesting for me to know about Japanese engines from 90s, they are great. I spend my times on German engines from that era. I like to know your opinion on some of them like M112 and M113. I think they're the most reliable engine from Germany. there are some around here on W203 and W211 chassis with about 600K km to 800k km without any major repair...
Only rust or infidelity can divorce you from an M111 equipped car.
Rocker Arms.
14:50 Out here making V8 boys double-take!