This is so cool! I was already thinking about removing plastic on both sides wich could take me at least 2h. I was panicking until you've said DON'T PANIC. Saved me a lot of time and nerves.Thank you man!
Thanks for the guide! Also worth noting that my 2014 Sharan can take a flathead screwdriver on the white 11mm bolt head as well. It meant only 1 tool required. 👍
You genius. Thank you so much. I looked at that offside 12v socket for ages working out how to get to the 11mm socket behind. 👍🏼👍🏼 Also works on Seat Alhambra!
Hi. Your vedio one of best vedio on RUclips. I need to change tail light but I was don't know how to do. I watched your vedio and I fallow your instructions. I done very easily and change the light. Thank you fir upload the vedio
Thank you so much for this hugely informative video. I have an Alhambra and the instructions worked fine. Saved me a lot of aggravation and head scratching!
wtf. since one week i try to find how to remove these right rear light thank you so mutch how easy it is and i broke my head trying to find how remove.
Thanks a lot for this video! I have warning (2012) Sharan) for tail light and reverse light on right side (in the door). Replacing bulbs did not fix it and none of the door lights are working on the right side, neither right side of third brake light (LED). Could it be a fuse or perhaps a problem with the wiring?
I'm not sure if there's a fuse for those lights, canbus switches them off if there's a problem. Maybe wiring, also check bulb contacts, so there's no water collecting and no oxidation. Don't know the solution, sorry
Thanks. Do you know how to change backlight (two small lights near the front on the inside). I got them out, but then it is not clear how to get to the light bulb in the housing
Sorry Ahmad, I'm not very good with wiring. There are few Facebook groups you can ask. I will give you couple links: facebook.com/groups/1463201880401563/ And this one: facebook.com/groups/wheelsandmotors.sharan/
Hi, Thank you for all videos, just need to know if you can help me with something. I want to install an aftermarket wireless RVC (reverse camera). The camera need to be connected to the reverse light wire and Earth (GND). Which wire is live and earth please. Regards
+Farid Khan In that connector (in rear door part of light) you have 4 wires, 1 of them is thicker than the other 3, so I would believe that logically it would be ground wire. One of the remaining 3 powers reversing bulb. Which one of them, I don't know - it's difficult to track there. The other way you could connect on to metal bits on both sides of reversing bulb... However either way you connect something to reversing light bulb - would that not mess up resistance and mislead ECU and make it think that bulb is faulty? Is your RVC compatible with this Sharan?
+WheelsAndMotors Thank you for your kind reply. The RVC camera is compatible with my car (VW Touran 2012 1T3), but it's an aftermarket camera and not the OEM. The trunk door is exactly the same like this Sharan MK2. I noticed that on the other side of the door the wires are of three different colours and not all white like the driver side. The camera need to be connected to a live and Ground. I don't know if by connecting the camera it will mess up resistance and mislead ECU and make it think that bulb is faulty. I am waiting or a reply from VW and then decide . But in the mean time if you can verify yours car other side wires and let me know which wire is live. Regards
+Farid Khan Just had a look at my left light. I have 3 wires in the connector, because I have fog light only on the right. So that narrows it down to 2 middle wires. Yeah, wires on the other side are also all white. I think the best way to find reverse light wire - use voltmeter. The wire connections have metal bits. The safest way is check it this way. Make sure that you use it voltage mode though, not in amperage. I'm not in my garage now, so I can't test it on my car. Anyway - our cars are not exactly the same, so voltmeter would give you the best answer.
If that light is not working - big chance that actual LED string is faulty. There's one thing - spray jet of the rear window washer system is integrated in that 3rd brake light bulb. I'v never done it myself yet, but, accordingly to manual, it's removable with plastic wedge (pry out) and then disconnect washer hose and electric connector. Whenever I scan my car, it also mentions auxiliary heater fault. Can't be bothered so far, whenever I'll have more time, I'll look into it.
It's easier than on Sharan, because you don't have to remove rear lights. I'll make a video about Sharan soon. Remove bolts from inside wheelarch, then few from the bottom edge and then there's one bolt on each side in the corner from bumper cover into wing. In Sharan you would have to remove rear lights as well, because there are some bolts underneath. I don't have a Touran, so you can check that on practice.
PERFECT. I've seen some videos before - but your guide about the COMPLETE rear ist the best one! Chapeau!
This is so cool!
I was already thinking about removing plastic on both sides wich could take me at least 2h.
I was panicking until you've said DON'T PANIC.
Saved me a lot of time and nerves.Thank you man!
Life is easy and effortless 😎👍
Awesome, I did mine today. Thanks for the instructional video. For the lights in the tailgate, you don't even need a screwdriver!
Yes, you're right. With practice I stopped using it too.
Thanks for the guide! Also worth noting that my 2014 Sharan can take a flathead screwdriver on the white 11mm bolt head as well. It meant only 1 tool required. 👍
Good to know 👍
You genius. Thank you so much. I looked at that offside 12v socket for ages working out how to get to the 11mm socket behind. 👍🏼👍🏼
Also works on Seat Alhambra!
Thanks 😎👍
who'd have thought car maintenance videos could be fun to watch? thanks for the humour as well as the instructions.
Thanks :)
Thank you so much mate! Guys like you saves us people soooooo much headache! Keep up the good work 👍🏼
Thanks 😊 I'll try my best
Hi.
Your vedio one of best vedio on RUclips.
I need to change tail light but I was don't know how to do.
I watched your vedio and I fallow your instructions.
I done very easily and change the light.
Thank you fir upload the vedio
You're welcome 👍
Paldies, malacis, ļoti noderīgs kanāls tev
Paldies 😎👍
Best sharan videos on RUclips 👍
Thanks 😇
Thank you so much for this hugely informative video. I have an Alhambra and the instructions worked fine. Saved me a lot of aggravation and head scratching!
You're welcome Steve 👍
Thank you for the video. It helped my with how to take out the body to change the reverse light bulb. The other bulb was easy to take out.
You're welcome 👍
Huge thanks. I was really stuck on how to replace a smashed rear light cluster. Perfect video 🙂
Thanks, glad if it helps 😊
That was really helpful and no doubt saved me a shed load of broken fasteners. Thank you👍
You're welcome Dave 👍
Especially at 9.20h the secret "door" was my riddle, crazy thing 🙂
You're welcome 😊
Gracias desde España 🇪🇸. Fantástico trabajo 👍
You're welcome 👍
Thank you very much. Your instruction is very helpful. ❤️👍😉
You're welcome 😊
thanks bro, vw at london wapping wanted half hours lobour charge of £75 to fit these lights . thanks a million.
75 quid for a bulb change?? I should give up my job and open bulb changing business in London :))
Brilliant my friend very helpful thank you so much 😊
You're very welcome 👍
I leaned from your video. Now I change oil by my self. Very easy.
Thanks 👍
Thank you for the video I have an Alhambra and it’s exactly the same you save me some money there👊
You're very welcome Salim 👍
Thanks a lot! I was already breaking all that stuff...and then your video!! So simple! 5 Stars
Thanks Manuel 😊👍
Stiil using and sharing your videos , thanks
Thanks 👍
Super helpful sir, thanks a lot 🎉
You're very welcome 😊
wtf. since one week i try to find how to remove these right rear light thank you so mutch how easy it is and i broke my head trying to find how remove.
You're welcome :)
Top vid. Thanks. Replacing passenger light after watching this.
This is very useful, thank you very much!! Could you show us how to replace the upper/ third brake light of sharan as well?
Eventually.. Don't have much time at the moment, sorry.. Thanks for good idea.
Your video helped me with so many different problems.
Thanks a million 👍
You're very welcome :)
Thank you that’s very helpful😊
You're very welcome, Marek 👍
Merci !! Je suis français et c'est facile, have a good day !
You're very welcome 👍
Nice and wonderful information about this 👍👍
You're very welcome 👍
Thanks for this nice video.
You are very welcome 😊
very usefull 7n videos, i learn a lot out of them..Thankx mate.
You're very welcome :) I might do few more in the future..
Well done Video I appreciate it also for Germans....
Thanks 👍
Awesome video brother!!! Saved me £40 quid!
£40 for a bulb change! Let's open bulb changing business :)))
Hi! I was wondering if I can fit the new rear set of 2016 LED Tail Lights on a 2011 MK2...
Sorry Eduardo, I don't know if it's "plug and play" or requires adaptation...
@@wawayltd Thanks for your reply! I meant if the set lights are same size…wirings I can sort out…thanks!
@@Attic-Toy-Design No idea, sorry 🤔
Great videos on the 7n Sharan. Can you please make a video on how to remove the front bumper on the Sharan?
Thanks, I think it would be good video... but I don't have time at the moment. I'll try to do it in the near future.
you are the best 👍
Thanks 😊
Merci pour tes informations ℹ️ ℹ️ ℹ️ top
Thanks a lot for this video! I have warning (2012) Sharan) for tail light and reverse light on right side (in the door). Replacing bulbs did not fix it and none of the door lights are working on the right side, neither right side of third brake light (LED). Could it be a fuse or perhaps a problem with the wiring?
I'm not sure if there's a fuse for those lights, canbus switches them off if there's a problem. Maybe wiring, also check bulb contacts, so there's no water collecting and no oxidation. Don't know the solution, sorry
Thanks. Do you know how to change backlight (two small lights near the front on the inside). I got them out, but then it is not clear how to get to the light bulb in the housing
Sorry... 2 small lights near the front on the inside... Where is that?
Hey. Got 2018 sharan. Please show me reverse light cables to install parking sensors. I have front and back sensors. Much appreciate.
Sorry Ahmad, I'm not very good with wiring. There are few Facebook groups you can ask. I will give you couple links:
facebook.com/groups/1463201880401563/
And this one:
facebook.com/groups/wheelsandmotors.sharan/
thanks a lot, now i know how to do it!
Easy-peasy 😷👍
Well done very helpful.
Thanks Farhat! 👍
Thanx - huge help!
You're welcome 👍
Make a video of “guide me home” light installation. My 2018 sharan don’t have it thanks.
What is "guide me home"?
Hi,
Thank you for all videos, just need to know if you can help me with something. I want to install an aftermarket wireless RVC (reverse camera). The camera need to be connected to the reverse light wire and Earth (GND). Which wire is live and earth please.
Regards
+Farid Khan In that connector (in rear door part of light) you have 4 wires, 1 of them is thicker than the other 3, so I would believe that logically it would be ground wire. One of the remaining 3 powers reversing bulb. Which one of them, I don't know - it's difficult to track there. The other way you could connect on to metal bits on both sides of reversing bulb... However either way you connect something to reversing light bulb - would that not mess up resistance and mislead ECU and make it think that bulb is faulty? Is your RVC compatible with this Sharan?
+WheelsAndMotors Thank you for your kind reply. The RVC camera is compatible with my car (VW Touran 2012 1T3), but it's an aftermarket camera and not the OEM. The trunk door is exactly the same like this Sharan MK2. I noticed that on the other side of the door the wires are of three different colours and not all white like the driver side. The camera need to be connected to a live and Ground. I don't know if by connecting the camera it will mess up resistance and mislead ECU and make it think that bulb is faulty. I am waiting or a reply from VW and then decide . But in the mean time if you can verify yours car other side wires and let me know which wire is live.
Regards
+Farid Khan Just had a look at my left light. I have 3 wires in the connector, because I have fog light only on the right. So that narrows it down to 2 middle wires. Yeah, wires on the other side are also all white. I think the best way to find reverse light wire - use voltmeter. The wire connections have metal bits. The safest way is check it this way. Make sure that you use it voltage mode though, not in amperage. I'm not in my garage now, so I can't test it on my car. Anyway - our cars are not exactly the same, so voltmeter would give you the best answer.
+WheelsAndMotors Thank you very much for you time, will use voltmeter on voltage mode .
Hi m'y Friend Can you show me how i changé thé fog light in front ok car pls
Sorry, my car doesn't have fog lights...
You saved me today
Glad if it helps 😎👍
Hi can u tell me how to fix 3rd brake light fault on seat Alhambra also rear auxiliary heater fuse location
If that light is not working - big chance that actual LED string is faulty. There's one thing - spray jet of the rear window washer system is integrated in that 3rd brake light bulb. I'v never done it myself yet, but, accordingly to manual, it's removable with plastic wedge (pry out) and then disconnect washer hose and electric connector. Whenever I scan my car, it also mentions auxiliary heater fault. Can't be bothered so far, whenever I'll have more time, I'll look into it.
Hi Andy, there's one good set of workshop manuals for VAGs - have a look for Elsawin on eBay.
That was helpfull- Thanks
You're welcome
Is it the same process for a seat Alhambra latest model?
Don't know, some of them come with LEDs. Try to find out.
@@wawayltd is it the same process for removing the outer taillight on the Alhrambra Thank you.
Big chance that yes, but not 100% sure. I don't have access to Alhambra. Please try it to find out.
Thx you for a good vidoe
You're welcome 😎👍
Iv just bought one qny chsnce u can show us how to remove a side door and fit one
Sorry my friend, recently I don't have any time for new videos :(
Greate yob thanx Mate...👍
You're welcome 👍
How i can remove the other rear óptic ? Is full of rain water
Yes. It's held by 3 little nuts - have a look when you remove bulb holder.
@@wawayltd Thank you so much
Thanks for "secret" storage!
You're welcome :) Just don't tell anyone :)))
Thx for your effort
You're welcome 😊
thank you!
You're welcome 👍
Nice 👍
Can not see the right side you did and would you able to make that clear please thanks
Please check this link, hope it helps:
www.wheelsandmotors.com/manual/60cf32da3b15c9000481869b
Thank you
You're welcome 😎
Thanks for this.
You're welcome :)
thx for showing!
You're welcome :)
How to Remove a VW touran 2014 Rear Bumper
It's easier than on Sharan, because you don't have to remove rear lights. I'll make a video about Sharan soon. Remove bolts from inside wheelarch, then few from the bottom edge and then there's one bolt on each side in the corner from bumper cover into wing. In Sharan you would have to remove rear lights as well, because there are some bolts underneath. I don't have a Touran, so you can check that on practice.
Here's the video about Sharan rear bumper:
ruclips.net/video/WnsgKW5jQkk/видео.html
Thanks really great
You're very welcome :)
thanks
You're welcome 👍
nice video
Thanks :)
Perfect video sou save me from my dad fight me
Don't fight with your dad 😁
Thank you.
You're very welcome :) There will be more.
süper
Thanks 😊
MakesNoScience Yes :( A6 had to go
Thank you!
You're welcome 👍
Thanks
You're welcome!