I got that exact gun as my primary and I got a illuminated scope and silencer +Chris tricked it up a bit to shoot further so it's pretty cool.But it's not the best fore "The Hive".😎
I love your videos! One time my cousin bought a huge sniper rifle and it broke after about a week when he got it from Main Irish Airsoft! I still like them and get guns from there though! Haha
I had this gun actually and "not gonna have any failures" is a bit misleading, my gun had a couple issues, first was the mags leaking which i don't even know why they leaked I barely used it. Second was the bolt mechanism completely jammed on me before I sold it off after a year of owning it, which is very unfortunate cause the gun was such nice quality and had a nice weight to it aswell, just an overall kickass gun but sadly it had too many issues. I know I didn't exactly do maintenance on it but still, the gun being practically fucked after a year is pretty weird especially when I never ever played an airsoft match with it in my entire time having it (I shot the gun a few times to get some fun out of it a bit but that was it, airsoft fields were non existent where I lived sadly and I didn't know anyone that played it). But I think I might have gotten a faulty gun is all, just kinda sucks how it ended up :/
Cen Blackwell It likes the factory HK mags, G&P Evike high rps 130 and 360 round Poly mags, Troy 340rd Poly battle mags and SOCOM Gear 190rd Lancer midcaps that I can personally reccomend.
The VFC piston and tappet plate are made of brittle plastic so I'd recommend replacing. The self shimming gears are okay, but not the best and the motor is kinda weak.
Would you be able to take of the extended barrel, keep the inner barrel and put on a silencer so you can get the same length inner barrel but different look???
Well, technically the 416 was based on the M4, which was a later mil-spec version of the Armalite Rifle 15 (AR15). So the 416 would be considered to be on the AR15 platform, but it was based off of the M4.
The M27 IAR is a different weapon. This is a 416. The M27 is based of the 416 with a heavier and longer barrel its also used with a magazine with a higher capacity. It was made so the support gunner doesn't stand out to the enemy so he cant be singled out as a priority to kill along with it being lighter than the issued m249, its easier to carry and manipulate.
oh yeah this beats the G&G version hands down.Not to say that the G&G one is bad or anything, its a very solid gun. VFC 416 just goes that extra mile, not to mention its fully licensed. Its a little more expensive but you get a lot of gun for your money.
H&K don't make AEG's mate. This is VFC. As it says in the title. The TM 416 has certain characteristics features which differentiate it from VFC's 416. In short it's not a H&K or TM AEG, it's a VFC 416
La meilleur réplique de tout la terre wallah
😅
I got that exact gun as my primary and I got a illuminated scope and silencer +Chris tricked it up a bit to shoot further so it's pretty cool.But it's not the best fore "The Hive".😎
now i have that one but can you remove the muzzle instead of removing the barrel because i have a suppressor that i can put on it
I love your videos! One time my cousin bought a huge sniper rifle and it broke after about a week when he got it from Main Irish Airsoft! I still like them and get guns from there though! Haha
What's the point of buying a sniper in the first place in Ireland they are so shit there like trying to snipe someone with a Nerf gun😂😂😂😂😂😂
9:42 Very Very TASTY Looking!?!?!?!?!? WTF!!!
I know I'm late. Buttt, the two ones that look the same are the 416d and the m27 iar, not the 417
Civilian 416 is a mr 556 u can even touch the real ones
Any chance you can get kris to list the parts he put in his also oddy? I like his idea of range over RoF
I had this gun actually and "not gonna have any failures" is a bit misleading, my gun had a couple issues, first was the mags leaking which i don't even know why they leaked I barely used it. Second was the bolt mechanism completely jammed on me before I sold it off after a year of owning it, which is very unfortunate cause the gun was such nice quality and had a nice weight to it aswell, just an overall kickass gun but sadly it had too many issues. I know I didn't exactly do maintenance on it but still, the gun being practically fucked after a year is pretty weird especially when I never ever played an airsoft match with it in my entire time having it (I shot the gun a few times to get some fun out of it a bit but that was it, airsoft fields were non existent where I lived sadly and I didn't know anyone that played it).
But I think I might have gotten a faulty gun is all, just kinda sucks how it ended up :/
You obviously got a defect. Feels bad man, you should have sent it to your retailer and gotten it fixed
@@GrievyRZ I bought it online...
doesn't matter anymore though as this was over 5 years ago
Will that take Pmags or only the H&K ones?
Great review, thanks for posting it...
The 416 is a picky rifle, Iv'e heard it only fits Stanag mags, and Magpul's 416 specific E-Mags. Hope this helped!
Cen Blackwell It likes the factory HK mags, G&P Evike high rps 130 and 360 round Poly mags, Troy 340rd Poly battle mags and SOCOM Gear 190rd Lancer midcaps that I can personally reccomend.
Hi, someone can help me ? I search a loader like emag who is compatible with my 416D VFC AEG please PTS are compatibles ?
Hi does this gun have 14mm ccw threads?
Can you a Suppressor on the end so Its technically Integrally Suppressed
you can take off the flash-hider and the barrel, so yes.
great vid guys
If you compare this VFC version, with the HK416D from Tokyo Marui, are then there major differences which would be worth the more expensive TM?
not really vfc have nicer bodies
The VFC piston and tappet plate are made of brittle plastic so I'd recommend replacing. The self shimming gears are okay, but not the best and the motor is kinda weak.
True but on the newest version they fixed the piston and tappet plate problems
Would you be able to take of the extended barrel, keep the inner barrel and put on a silencer so you can get the same length inner barrel but different look???
gardehusar24 yes
How much would it cost to get one of these and get it tricked out the way Chris has it?
RotatableAxle almost as much as a real AR15
j r which is?
about £1000
So 1450 euro
about €700
Can I use common m4/m16 mags?
its called a AR platform that style of gun this is
Well, technically the 416 was based on the M4, which was a later mil-spec version of the Armalite Rifle 15 (AR15). So the 416 would be considered to be on the AR15 platform, but it was based off of the M4.
Y do this gun need to be so expensive? It's the M27 IAR.
The M27 IAR is a different weapon. This is a 416. The M27 is based of the 416 with a heavier and longer barrel its also used with a magazine with a higher capacity. It was made so the support gunner doesn't stand out to the enemy so he cant be singled out as a priority to kill along with it being lighter than the issued m249, its easier to carry and manipulate.
So is this better than the G&G version in your opinion?
oh yeah this beats the G&G version hands down.Not to say that the G&G one is bad or anything, its a very solid gun. VFC 416 just goes that extra mile, not to mention its fully licensed. Its a little more expensive but you get a lot of gun for your money.
Defo,have 1 tried the other😂
i don´t understand this! is this gun tokio marui or heckler & koch?
H&K don't make AEG's mate. This is VFC. As it says in the title. The TM 416 has certain characteristics features which differentiate it from VFC's 416. In short it's not a H&K or TM AEG, it's a VFC 416
H&K licensed VFC made
Is it just electric?
Gas
Do you need to heat up the barrel extension to unscrew it?
Maybious nope