DIY Wooden Businesscard with NFC Tag
HTML-код
- Опубликовано: 20 июл 2021
- Laser cutting a business card: In this video we create a wooden NFC business card with an epoxy inlay. The card contains a NFC chip with contact details or a website information. If you put it close to a phone it will show the contact details or open a website.
BLOG: wayofwood.com/diy-wooden-nfc-b...
K40 SETUP VIDEO: • K40 China Laser Setup
=======
Tools/Supplies Used:
- K40 Chinese laser: wayofwood.com/tool/k40-chines...
- Laser protection glasses: wayofwood.com/tool/laser-prot...
- NFC Tags: wayofwood.com/tool/nfc-tags/
- Beech veneer: wayofwood.com/tool/beech-veneer/
- 5 minute epoxy glue: wayofwood.com/tool/5-minute-e...
- Metallic pigment powder: wayofwood.com/tool/metallic-p...
=======
VISIT my website:
wayofwood.com/
=======
FOLLOW ME on Social Media:
Instagram - / wayofwood
Twitter - / wayofwood
Pinterest - / wayofwood
Thingiverse - www.thingiverse.com/wayofwood
=======
Beautiful
Good job 👍
Thank you! It's a really easy project with a laser cutter.
Seems like a cool project. Am I correct in assuming the epoxy is almost paper thin?
Correct!
Cant you make it thinner? 2mm is way to thick. I saw somwone that swlls nfc wood cards that are only 0.8mm
Good job!!! Very Nice ! I saw 4 layers of veneer to make it . what is the thickness of each veneer sheets?😁
I would say roughly 1-2 mm thickness
@@WayofWood then the thickness of card should be around 4mm. I am thinking about how to make it thinner........😉
I think it's rather 2 mm in total. 😉
@@WayofWood then , the thickness of each veneer sheets should be around 0.5mm
Correct 😉
How thick is the veneer wood
I would guess it's 1.5 to 2mm - but it should work with any thickness
@@WayofWood thanks. I like the idea have been looking for metal alternative nfc diy for a while with no luck then saw this video. How's the nfc working for you
It’s working quite well. I have added a bit more finish to make it more durable - other that that it holds up very well.
@@WayofWood thanks !!
Welcome.