I'm not a fan of off-road vehicles with non-stock wheel and tire size, but I'll make an exception: fit & finish looks immaculate. In the diesel world they taught me to use a Hand Truck to take wheels on & off (not that this would work for the spare). Mounted tyres are really awkward to handle because the size, center of mass and shape makes locking your shoulder, and spine alignment difficult, but not impossible. I vote for powder coating the bracket blue. Keep up the magnificent work!
I've ran those tires for over 40 years and without a spare and have never had a flat. They're great on the highway and off-road. They look great on the Bronco and the wheels look like they're made for your vehicle. Great look.
Nice thing about having a matching, full-size spare is doing 5 tire rotations. You can get something like 20% additional life out of the tires vs a normal 4 tire rotation.
They're my favorite tires but if you're running a large tire on a solid front axle you may have a problem with death wobble due to the sidewall being a bit softer. On this a Bronco that's no issue though.
@@4Kandlez I didn't use the CJ as a daily driver so not that many miles. Jeep CJ's are so light that they showed little wear. Only replaced them because of their age. Rarely had to even put air in them lol.
OMG. The blue gunmetal rims really POP! The wide flairs look amazing as well. I admire your attitude and patience with a defective part. You still went full-on joy and happy. I'm loving Pokey even more.
@14:55 the wheels match the color of the logo on the front corner panel perfectly…awesome set up. You’re probably the only bronco with this wheel color combination.
LOVE the new wheels!! I'm glad Matt showed you the gunmetal blue. They look really sharp with Pokey's color and accents, then the offset just really ties it together! I want to kick Ford though for sending you a scuffed fender flare because those Sasquatch flares really top off the look. I'm so happy for you and Pokey! He's looking so good!
Love your channel and I'm definitely following the adventures of Pokey! I've got the same Bronco build so all of your videos about mods are super, duper helpful. Thanks for being a great resource. Keep up the great work, Sarah!
Have to say it, your video editing just gets better and better! The content is great, but your editing just amplifies it. (And yes! Those gun-blue wheels were the right choice!) 🙌🏻
Matt was right on about those bluish wheels, and I'm inspired by your success in upsizing the tire/wheel size while dropping weight at each corner. Making me think again about which direction I want to go with my 4Runner. Thanks for sharing this with us Sarah. Keep up the great work and the entertaining content!
It’s refreshing and special to see someone as particular and methodical about stuff as I am. I would have been upset the same if my fender flares showed up like that. Most people don’t get it. Great video Sarah! Keep up the great work!
Very nice, the color on the wheels ties everything together. Great job with size and weight, so many make the mistake of adding weight causing component failure along with changing suspension characteristics.
I liked the original black steels, so I'm glad you're keeping them. But the new wheels and tyres along with the wider arches look amazing. Matt was so spot on with his suggestion and what an awesome colour they are, almost like they had your car in mind when they manufactured them. You have the cleanest vehicles I've ever seen! Would be interesting to know if the lower unsprung weight has improved the handling/ride? Great video! 👍😎
Bronco is coming together. Like your attention to detail. If had to have someone working on my projects would be someone like you. Getting it right is important.
KO2's are a great tire both on and off road. I'm on my 2nd set on my Ram 2500. I took it on multiple 2000 mile road trips to Utah and ran trails in southern and western Utah. You won't be disappointed in that purchase.
LOVIN' the Bronco build! It reminds me of the Suzuki Jimny we DON'T get here in the states! It's nice to see a different model built than the typical 4-door Sasquatch package one...LOVE LOVE LOVE your Bronco!
That wheel and tire combo looks great with the cactus gray! I'm definitely thinking about getting a Bronco, but I'll probably wait until I see what kind of issues start showing up. Also, where I live, the only ones available are the Outer Banks, Badlands and Wildtrak and they began showing up a few months.
I have seen some minor issues with the Bronco's one are the Tie Rods and Rack and Pinion when Hard Core off-roading Some other small things like the cross-member hanging up on obstacles that and placement of the lower shock mounts and the reservoir for the shocks being possibly damaged.
@@WilliamTythas Totally gave me an idea on how to prank a friend of mine that has a bronco. I'm going to find it in the parking lot at work, pull off his fenders and then drop them off at his front door. lol
The new tires look great, and those wheels are gorgeous. The flares were designed with those quick disconnects because Ford expects people to actually take them offroad, so a bunch of parts are designed to be easily replaced by owners if something happens out on the trail. I'm looking forward to seeing what else you have planned for that beautiful Bronco.
It’s mean to be for sure! Everything you did to your Bronco is exactly what I would have done to it! I was wondering if you were going to put the raised white letters on the tires on the outside but I think it looks perfect the way it is. Those are the exact tires I would have bought too! I’m excited for more…..
I’ve been looking for your channel forever! I remember seeing you on tfl and liked your insight. Such a unique look to have volks on a bronco. Love it.
That new setup really makes a huge difference! I was doubting a little at first with the color but now i love it! It’s amazing how those little improvements can change the whole car. Just awesome!
It always amazes me how wheels, tires, and fender flairs can instantly turn a “buffed” vehicle into a “body builder” vehicle. As a boomer who grew up as an “analog” guy, I have a possibly dumb question. Do the digital computers automatically recalibrate the speedometer when you change the wheel and tire dimensions? I’m glad you didn’t cancel the Bronco! Thanks! 👍👍👍
I really like the look and design of that catch can. Although on their website I only find the unit with AN fittings on top and yours has different stuff on top. Did you order other fittings? Additionally I love the wheels and tires choice and you'll benefit from the unsprung weight loss!
Loved use of torque wrench on wheels. Back in olden days, Volvo realized vigourous use of impact guns by American techs was literally turning their pretty OEM alloy wheels into automotive versions of warped vinyl records ( I flashed back to that when I saw your beautiful Swedish catchcans ),.So , being extremely component and thrifty engineers, they came up with a genius solution: little color coded sockets that were model specific, and meant that you jack up your impact gun to ridiculous levels, but the little babies would only tighten so much! And actually were so beautifully engineered that they just didn't snap or wear out..Love your videos, and the extreme level of your technical skiils.
Hey Sarah, I'm intrigued as to what sort of difference, if any, the larger circumference makes to the overall ratio to the diffs? I know it's an insignificant change to the speedometer but I was under the impression differentials had to stay within a specific ratio to avoid premature wear?
Dang! Those rims look incredible on there. Such a cool colour. So with Broncos do you have the ability to adjust the speedometer to account for the larger tire diameter?
Sarah, it may not be as far off as you think. Check your speed in Google maps while driving. I recently went from 32 to 33 inch tires on my big bend and the speedometer still matches GPS speed exactly, even at 80mph.
I was wandering the same thing. I know with my Mustang, lager wheels threw the speedo off quite a bit, speedo says 78 and gps says 65. Also, Ford couldn't reprogram it because my wheel/ tire comb is not in their data base.
That’s an Awesome looking Bronco. I’m really enjoying your videos including your sense of humor. Always nice to learn useful information from you. 👍🏻👍🏻
Excellent video, Sarah (as always!). Quick question, though: When you switched to tires of a different diameter, do you need to make an adjustment to the speedometer/odometer or do you just accept the fact that your speed and miles will be incorrect?
With any luck the Broncos read faster than actual speed like my Silverado did and when I put 285-7516's on my Silverado it made the speedometer read correctly. I bought access to my PCM through HP tuners and I can change the speedometer but didn't need to...
I’m one of those people that does the matching spare wheel and tire as well! When you cycle the spare in with rotations you can go longer with a set so it’s actually economically smart to do! Loving your Pokey Horse Bronco Sarah! I own a 73 early model! Love it!!
Dang the wheels go perfect. Matt was right. They match the badge on the side so well, and the contrast with the paint is amazing. Looks like a SEMA ride, honestly.
Sarah all I can is YEAH! But big But you really impressed me with the weight, the height and info to match the after market wheels. Your Bronco has alway been a temptation now it is an influence. FORD sent her a check! Because of Sarah, many people will be buying Broncos.
Just the tip for an old time heavy collision tech. Take a heat gun and warm it up evenly over the whole flare and that stuff should go away works almost all plastic parts. Nice looking bronco
I can’t even believe it!! All I seen was the thumbnail “Jdm Meets Bronco” and the wheels blanked out and my brain instantly said mag blue TE37. Can’t even freaking believe it!! Awesome choice, unreal like had some kind of telepathy or something, crazy!!
I loved this video, I am so happy to see a lady doing all this car mechanic,remodeling stuff, if I didn’t need to work…I’d stay home and do the same things too❤️
I´ve never heard of Nuke Performance. Now I both heard about them and also realized they are from my hometown. Nice of them to send a bag of "Bilar" (cars).
I want a Bronco. Sadly, not available in the UK! Personally it would bug me that none of your flares were pristine, I would send the lot back for replacements. Keep up the great content Sarah...
clean - I always try to max out at no more than 3 colors - you have your exterior color - your black interior ( and tires of course ) and then your 'blue ish' accent stitching, Ford logo and wheels - looks fantastic .........
Sarah your wheel and tire swap are very smart. I did a similar swap with my 1987 Vanagon Syncro. The original heavy aluminum 14" wheel and tire combo were quite heavy even though the diameter was only 25". I put on Audi 5000 Quattro 15" wheels and a 235/75R 5 tire with a diameter of 29". Because of the light weight Audi forged rims my wheel and tire package is lighter than the smaller factory offering.
Excellent color blending with the wheels Sarah,not over powering to the point of where people will zero in on just the wheels and not the overall view of the bronco itself...
Great choice of Tires and Wheels Sarah, I love the much improved look of your Bronco. I too just purchased a set of BFG`s K02 LR-E had them installed on my 1986 Ford F-250 4X4 , very tough & capable tires for all driving conditions.
I've used those BFG's on my FJ for 16 years, never an issue. If those rims are that hard to come by I would have bought the full 2nd set for when one gets damaged. Keep up the great videos.
I’m really liking the color of your Bronco. Mat did you a solid on suggesting those blue rims. They look awesome.
I agree Don!
I'm not a fan of off-road vehicles with non-stock wheel and tire size, but I'll make an exception: fit & finish looks immaculate.
In the diesel world they taught me to use a Hand Truck to take wheels on & off (not that this would work for the spare). Mounted tyres are really awkward to handle because the size, center of mass and shape makes locking your shoulder, and spine alignment difficult, but not impossible.
I vote for powder coating the bracket blue. Keep up the magnificent work!
I appreciate that you always show what it takes to do a job the right way. Bonus points for torqueing the spare!
Did you torque in a star pattern?
@@jeffmercier7252 Is there a different torque value for the spare carrier than in the wheel hubs?
@@johndavidwolf4239 that value should be in the manual
I love the look of the new wheels, they do match your paint so well. They look much better than the steelies.
I've ran those tires for over 40 years and without a spare and have never had a flat. They're great on the highway and off-road. They look great on the Bronco and the wheels look like they're made for your vehicle. Great look.
Nice thing about having a matching, full-size spare is doing 5 tire rotations. You can get something like 20% additional life out of the tires vs a normal 4 tire rotation.
They're my favorite tires but if you're running a large tire on a solid front axle you may have a problem with death wobble due to the sidewall being a bit softer. On this a Bronco that's no issue though.
You did well to run the same tires for 40 years, were they not down to the belts? :)
@@4Kandlez I didn't use the CJ as a daily driver so not that many miles. Jeep CJ's are so light that they showed little wear. Only replaced them because of their age. Rarely had to even put air in them lol.
general grabbers are awesome
OMG. The blue gunmetal rims really POP! The wide flairs look amazing as well. I admire your attitude and patience with a defective part. You still went full-on joy and happy. I'm loving Pokey even more.
Yeah, those wheels/tires and fender flares are spot-on for that truck. 2 thumbs up.
Fun channel! I really love your slightly offbeat sense of humor. (And attention to detail!!)
@14:55 the wheels match the color of the logo on the front corner panel perfectly…awesome set up. You’re probably the only bronco with this wheel color combination.
This will be the #1 Bronco build to watch.
LOVE the new wheels!! I'm glad Matt showed you the gunmetal blue. They look really sharp with Pokey's color and accents, then the offset just really ties it together! I want to kick Ford though for sending you a scuffed fender flare because those Sasquatch flares really top off the look. I'm so happy for you and Pokey! He's looking so good!
Your Bronco looks fantastic. The blue wheels are definitely the right choice.
Love your channel and I'm definitely following the adventures of Pokey! I've got the same Bronco build so all of your videos about mods are super, duper helpful. Thanks for being a great resource. Keep up the great work, Sarah!
Sarah is way better than Super Car Blondie !
Killer tire and rim combo. Bronco’s lookin on fire. So liking this Bronco build👍👍
Matt is a genius. That is just super color coordination. Love the beefy light-weightier "Big" tires & wheels . . . . .
Have to say it, your video editing just gets better and better! The content is great, but your editing just amplifies it. (And yes! Those gun-blue wheels were the right choice!) 🙌🏻
Matt was right on about those bluish wheels, and I'm inspired by your success in upsizing the tire/wheel size while dropping weight at each corner. Making me think again about which direction I want to go with my 4Runner. Thanks for sharing this with us Sarah. Keep up the great work and the entertaining content!
Awesome tires. I had those (smaller that what you have there) on my Isuzu Trooper. Worked great on highways, off road and snow.
The rims you picked out are Dope. The rims match your black Diamond badge almost perfect.
Wow with the matt blue Rays you’ve just turned the Bronco on to an another level. Just superlative 💯👍👍
Sarah the type of girl to torque the spare tire. Impeccable attention to detail.
Those Wheels Really DO look Awesome. The gun metal Blue really sets off the look of pokey
It’s refreshing and special to see someone as particular and methodical about stuff as I am. I would have been upset the same if my fender flares showed up like that. Most people don’t get it. Great video Sarah! Keep up the great work!
Very nice, the color on the wheels ties everything together. Great job with size and weight, so many make the mistake of adding weight causing component failure along with changing suspension characteristics.
Those wheels are nice. A lot of times people put on the flashiest and largest wheel they can find but these look tasteful and unique. Very nice Sarah
The Bronco is looking so good. Can't wait to see you take it on some overland/camping trips. You know you deserve some quality time out of the shop :D
To be honest,you did a fantastic job with your wheel & tire selection .Combined with the flares it all looks amazing. We'll done pretty lady.
I liked the original black steels, so I'm glad you're keeping them. But the new wheels and tyres along with the wider arches look amazing. Matt was so spot on with his suggestion and what an awesome colour they are, almost like they had your car in mind when they manufactured them. You have the cleanest vehicles I've ever seen! Would be interesting to know if the lower unsprung weight has improved the handling/ride? Great video! 👍😎
Bronco is coming together. Like your attention to detail. If had to have someone working on my projects would be someone like you. Getting it right is important.
That thing is looking sick!!! Love how the little hints of blue on Pokie tie in the wheels perfectly
KO2's are a great tire both on and off road. I'm on my 2nd set on my Ram 2500. I took it on multiple 2000 mile road trips to Utah and ran trails in southern and western Utah. You won't be disappointed in that purchase.
Those wheels are SUPERB! Awesome setup!👌
LOVIN' the Bronco build! It reminds me of the Suzuki Jimny we DON'T get here in the states! It's nice to see a different model built than the typical 4-door Sasquatch package one...LOVE LOVE LOVE your Bronco!
The rims and tires are a massive improvement over the factory tires and rims. Great taste Sarah.
R RH… Rear right hand… You got it this time! Grin… These rims and fenders are SICK!
That wheel and tire combo looks great with the cactus gray! I'm definitely thinking about getting a Bronco, but I'll probably wait until I see what kind of issues start showing up. Also, where I live, the only ones available are the Outer Banks, Badlands and Wildtrak and they began showing up a few months.
I have seen some minor issues with the Bronco's one are the Tie Rods and Rack and Pinion when Hard Core off-roading Some other small things like the cross-member hanging up on obstacles that and placement of the lower shock mounts and the reservoir for the shocks being possibly damaged.
I loved the steelies! But having watched your channel for 3 years now, I just know you can't leave it alone. Nice choice by the way.
Not only do you have quick disconnects on the fender flares, the tips of the bumper come off with 1 bolt to give you more approach angle.
That’s rad!
not sure how I feel about quick connect parts on the exterior of my vehicle - too easy to steal
@@WilliamTythas Totally gave me an idea on how to prank a friend of mine that has a bronco. I'm going to find it in the parking lot at work, pull off his fenders and then drop them off at his front door. lol
@@PetrolJunkie hope your friend give’s you a beating after your ‘prank’. 🙃
@@ianloyd6384 We're friends, we don't 'beat' each other. What kind of jerk does that?
Looks great! That size fits the 2-door perfect.
Those new rims and tires are sick!!!❤️
Hello Sarah I love those new wheels and tires and the fender flares it's all coming together.
The wheels and tires look great!!
The Bronco is really nice. Your selections are very coordinated and the pending upgrades are going to enhance the overall utility. Way to go!
The new tires look great, and those wheels are gorgeous. The flares were designed with those quick disconnects because Ford expects people to actually take them offroad, so a bunch of parts are designed to be easily replaced by owners if something happens out on the trail. I'm looking forward to seeing what else you have planned for that beautiful Bronco.
Perfect wheels for your pony, and you are going to love those KO2’s once you get off road (had em on my taco a few years back).
It’s mean to be for sure! Everything you did to your Bronco is exactly what I would have done to it! I was wondering if you were going to put the raised white letters on the tires on the outside but I think it looks perfect the way it is. Those are the exact tires I would have bought too! I’m excited for more…..
I’ve been looking for your channel forever! I remember seeing you on tfl and liked your insight. Such a unique look to have volks on a bronco. Love it.
That new setup really makes a huge difference! I was doubting a little at first with the color but now i love it! It’s amazing how those little improvements can change the whole car. Just awesome!
‘I don’t have the other part that goes with that box…” So many gems in your viddies :)
It always amazes me how wheels, tires, and fender flairs can instantly turn a “buffed” vehicle into a “body builder” vehicle. As a boomer who grew up as an “analog” guy, I have a possibly dumb question. Do the digital computers automatically recalibrate the speedometer when you change the wheel and tire dimensions? I’m glad you didn’t cancel the Bronco! Thanks! 👍👍👍
I have a 17 Transit with bigger than stock-size tires, and the answer for my Ford is no. I had the same question for Sarah here.
I had to use a programmer to fix the speedo when I put larger tires on my Jeep. Luckily it's a pretty simple task.
I have a 2015 Ram 1500 and I went from the factory 33's to 35's and I had to recalibrate my digital speedo.
I went thru 4 sets of that exact tire and size on my 02 duramax. They're absolutely amazing! You'll love them
Love the build, digging the OEM Plus look…by any chance did I miss the rim size/offset etc for the RAYS Wheels?!
YES! Im not the only one.
Was so excited when I saw your video headline. Im doing the same with my Bronco, mixing JDM with offroading.
Hi, what are the offsets on those te37s you got?
Sarah, the flares are designed with the quick disconnects for easy removal when off roading.
I really like the look and design of that catch can. Although on their website I only find the unit with AN fittings on top and yours has different stuff on top. Did you order other fittings?
Additionally I love the wheels and tires choice and you'll benefit from the unsprung weight loss!
Loved use of torque wrench on wheels. Back in olden days, Volvo realized vigourous use of impact guns by American techs was literally turning their pretty OEM alloy wheels into automotive versions of warped vinyl records ( I flashed back to that when I saw your beautiful Swedish catchcans ),.So , being extremely component and thrifty engineers, they came up with a genius solution: little color coded sockets that were model specific, and meant that you jack up your impact gun to ridiculous levels, but the little babies would only tighten so much! And actually were so beautifully engineered that they just didn't snap or wear out..Love your videos, and the extreme level of your technical skiils.
Hey Sarah, I'm intrigued as to what sort of difference, if any, the larger circumference makes to the overall ratio to the diffs? I know it's an insignificant change to the speedometer but I was under the impression differentials had to stay within a specific ratio to avoid premature wear?
Yay Sweden 🇸🇪🇸🇪🇸🇪 great stuff! Now you really made the day for all of us Swedish fans. Great upgrades for the Bronco. Those rims are so beautiful.
Dang! Those rims look incredible on there. Such a cool colour. So with Broncos do you have the ability to adjust the speedometer to account for the larger tire diameter?
It’s going to throw it of by 2.2mph at 60, you typically use SCT, a programmer for Ford speedometers.
@@SarahnTuned Not too bad. Do you access to the stuff for that kind of tune?
Sarah, it may not be as far off as you think. Check your speed in Google maps while driving. I recently went from 32 to 33 inch tires on my big bend and the speedometer still matches GPS speed exactly, even at 80mph.
It’ll probably change it just enough to make it correct. Most cars I’ve had have read a couple kph higher than actual speed.
I was wandering the same thing. I know with my Mustang, lager wheels threw the speedo off quite a bit, speedo says 78 and gps says 65. Also, Ford couldn't reprogram it because my wheel/ tire comb is not in their data base.
That’s an Awesome looking Bronco. I’m really enjoying your videos including your sense of humor. Always nice to learn useful information from you. 👍🏻👍🏻
That wheel and tire combo look fantastic! Did anything have to be recalibrated for the larger tires?
Wow, I never thought of using an rv water filter for washing a vehicle. That is a great idea! Thanks!
Excellent video, Sarah (as always!). Quick question, though: When you switched to tires of a different diameter, do you need to make an adjustment to the speedometer/odometer or do you just accept the fact that your speed and miles will be incorrect?
With any luck the Broncos read faster than actual speed like my Silverado did and when I put 285-7516's on my Silverado it made the speedometer read correctly. I bought access to my PCM through HP tuners and I can change the speedometer but didn't need to...
For every inch its 8km ph faster.
@@jasonh4167 why would you do that lol. Stay metric or imperial. Don’t mix and match you heathen.
I’m one of those people that does the matching spare wheel and tire as well! When you cycle the spare in with rotations you can go longer with a set so it’s actually economically smart to do! Loving your Pokey Horse Bronco Sarah! I own a 73 early model! Love it!!
Dang the wheels go perfect. Matt was right. They match the badge on the side so well, and the contrast with the paint is amazing. Looks like a SEMA ride, honestly.
Sarah all I can is YEAH! But big But you really impressed me with the weight, the height and info to match the after market wheels. Your Bronco has alway been a temptation now it is an influence. FORD sent her a check! Because of Sarah, many people will be buying Broncos.
Just the tip for an old time heavy collision tech. Take a heat gun and warm it up evenly over the whole flare and that stuff should go away works almost all plastic parts. Nice looking bronco
The more I see the more impressed. Ford seems to have put much thought into Bronco. Thank you for the informative vid.
I can’t even believe it!! All I seen was the thumbnail “Jdm Meets Bronco” and the wheels blanked out and my brain instantly said mag blue TE37. Can’t even freaking believe it!! Awesome choice, unreal like had some kind of telepathy or something, crazy!!
They match the black diamond logo perrrrrrrfectly, solid.
Wheel color and badges make it look perfect
Girl, you knocked it out of the park with your wheel and tire selection. Looks great!
I loved this video, I am so happy to see a lady doing all this car mechanic,remodeling stuff, if I didn’t need to work…I’d stay home and do the same things too❤️
Sarah… You’re truly the best and I’m just so totally luvin all of your great reviews as to all of your work ethics and fun personality 😎
I´ve never heard of Nuke Performance. Now I both heard about them and also realized they are from my hometown. Nice of them to send a bag of "Bilar" (cars).
My favourite colour Bronco & the 2-door is just excellent. 👍🏻
I want a Bronco. Sadly, not available in the UK! Personally it would bug me that none of your flares were pristine, I would send the lot back for replacements. Keep up the great content Sarah...
Now this is what a Bronco should look like! Great job!
Sarah treats every car so well! It's car paradise!
clean - I always try to max out at no more than 3 colors - you have your exterior color - your black interior ( and tires of course ) and then your 'blue ish' accent stitching, Ford logo and wheels - looks fantastic .........
Sarah your wheel and tire swap are very smart. I did a similar swap with my 1987 Vanagon Syncro. The original heavy aluminum 14" wheel and tire combo were quite heavy even though the diameter was only 25". I put on Audi 5000 Quattro 15" wheels and a 235/75R 5 tire with a diameter of 29". Because of the light weight Audi forged rims my wheel and tire package is lighter than the smaller factory offering.
That bronco is the perfect color for sitting on cinderblocks out in the desert … or in other words I like that wheel color !!!
Ahlgrens Bilar are a classic. Congratulations!
Don't forget to recalibrate the speedo to the larger tires.
Looking amazing! Loving your Bronco.
Clean! I
Holy crap! That's a beautiful color for the TEs! Great choice Sarah!
Excellent color blending with the wheels Sarah,not over powering to the point of where people will zero in on just the wheels and not the overall view of the bronco itself...
I love TE-37s. This is awesome and a great addition to your Bronco!
Thank Matt! Those wheels are very cool and so is the tire choice. I think it makes the vehicle so much better. Sarah you are so awesome!
I was thinking 285/75/17s would've looked better until I saw the 16s installed. Great choice!
You nailed it again. The blue TE's tie in perfectly!
Best colors I've seen!!! Nice job Sarah.
.....Dear Sarah! You really have a great eye for colors! great work!
I kinda like it without the flares! Its sort of a throwback to all the customized 82ish broncos! OTOH, new tires and flares look great!
Great choice of Tires and Wheels Sarah, I love the much improved look of your Bronco. I too just purchased a set of BFG`s K02 LR-E had them installed on my 1986 Ford F-250 4X4 , very tough & capable tires for all driving conditions.
The wheel seller hit the nail spot on!
I've used those BFG's on my FJ for 16 years, never an issue. If those rims are that hard to come by I would have bought the full 2nd set for when one gets damaged. Keep up the great videos.
I love that Bronco that’s a really shark looking two door and that color is great. Those new rims look amazing on pokie