Great video, thank you very much. Because of this video I ordered this spot welder too. Yesterday I wanted to change a 18650 cell to repair a Parkside 20V Accu. But the results were bad, it was mor glueing, not welding. I used the same parameter from this video. Then I downloaded an update file from FNIRSI, and now the results are fine. Maybe someone has the same problem. I'm Geman, so excuse my bad english.
Great video! The detailed review of the FNIRSI Spot Welder SWM-10 with the intelligent color screen was exactly what I was looking for. Thank you for your clear and concise explanations. Looking forward to more of your content!
Thanks for an enriching information video about this spot welder machine just acquired here in the house. Especially interesting where you pop up and the entrails are revealed. Unfortunately, spot welding will often not hold the welding points for 2 reasons, 1 one does not hold the welding pins 100% vertically down towards the welding material, or 2 one spot welds over insufficiently cleaned surfaces. If you at least weld with 100% vertical pins, you achieve better welding points. Keep going, lovely video report.
Bearing in mind the discharge current of these cells which are used in spot welders. I need to use more than 5 x 8Ah batteries for good performance. Otherwise, weaklings come.
This is so awesome, thanks for sharing! I have a question - can the battery pack in the SWM-10 be easily replaced once it's performance deteriorates? Thanks!
I thought there would be at least 8 transistors, but these are really very powerful and I don't think there is a need for more. FNIRSI really make quality stuff at affordable prices.
![Twenty One Pilots - The Line (from Arcane Season 2) [Official Audio]](http://i.ytimg.com/vi/XCz7WUotXs8/mqdefault.jpg)
Great video, thank you very much. Because of this video I ordered this spot welder too. Yesterday I wanted to change a 18650 cell to repair a Parkside 20V Accu. But the results were bad, it was mor glueing, not welding. I used the same parameter from this video. Then I downloaded an update file from FNIRSI, and now the results are fine. Maybe someone has the same problem. I'm Geman, so excuse my bad english.
Danke für die Info😊
Они увеличили длительность импульсов.
watch?v=QCW1gKhY2_U
Great video! The detailed review of the FNIRSI Spot Welder SWM-10 with the intelligent color screen was exactly what I was looking for. Thank you for your clear and concise explanations. Looking forward to more of your content!
Thank you my Friend🙂🤝
great Job my friend showing the different sizes of welding nickel plates and power setting ....Awesome!!!!! .Thank you.
Me acabo de comprar uno, gracias por la explicación, un saludo.
Thanks for an enriching information video about this spot welder machine just acquired here in the house. Especially interesting where you pop up and the entrails are revealed. Unfortunately, spot welding will often not hold the welding points for 2 reasons, 1 one does not hold the welding pins 100% vertically down towards the welding material, or 2 one spot welds over insufficiently cleaned surfaces. If you at least weld with 100% vertical pins, you achieve better welding points. Keep going, lovely video report.
That is the best demo I've ever seen. Do you recommend this model? Thank you.
For the price it's very good and powerful unlike other Chinese ones.
But now I use an even better one with super capacitors
@@ErCanEverything----- any chance of giving me a demo on the super capacitors. Thank you.
Still waiting on your parkside battery spot welder update video 🙂👍🏼
Bearing in mind the discharge current of these cells which are used in spot welders. I need to use more than 5 x 8Ah batteries for good performance. Otherwise, weaklings come.
Nice little and useful machine
This one is much better than the previous DH30
Good demonstration
This is so awesome, thanks for sharing!
I have a question - can the battery pack in the SWM-10 be easily replaced once it's performance deteriorates? Thanks!
Fnırsı swm 10 firmware yüklemesi ile ilgili bir video çekerseniz çok iyi olur. Şimdiden teşekkür ederim.
Nice video Showed everything
I'm glad if you liked it my Friend🙂🤝🤝🤝
That Good And Number One For You...😁😁😁👍♥️👍
Informative video.
Can you show, how to update to the latest firmware that available now at the fnirsi website? Thanks
Hi bro super im big fan
Thank you my Friend🙂🤝
Ok bro
I'm wondering how these little MOSFET'S can handle such current 🤯
And these brass or copper bars 🤩 serious stuff.
I thought there would be at least 8 transistors, but these are really very powerful and I don't think there is a need for more.
FNIRSI really make quality stuff at affordable prices.
👍👍👍👍👍
Nice bro
Mosfed 290A Current
How would you rate this to other spot welders tested, which one do you rate the best
if i already have dx10 spot welder, is it worth upgrading to this?, or just save the money to buy really proper spot welder like glitter 801D?
It will weld .15 pure nickel at full power but I don’t think it will do .20. There’s a big difference between plated steel and pure nickel
It seems like the cables could be a little bit longer. What do you think?
I think so too, at least 5cm more.💁
I bought it eeeeeh.
The cable plug connectors located not at a good position and its construction seems not secured enough too
İçinde ki pil lityum pil mi?
Can this do a copper nickel sandwich?
thanks
I have to try it🤔
@@ErCanEverything thanks that would be awesome if it will do it .. thanks again
@@GearJammer-me8uj No this welder does not push enough current to weld copper-nickel sandwich. That would be awesome though.
👍👋❤️❤️👋👍
Hello my Friend👋👋👋
В следующий раз разбирай болгаркой. Или молотоком с зубилом.
Can it spot weld 0.2 pure nickel strip? Or 0.15 pure nickel?
It can do 0.15mm pure nickel, but that’s pushing it. 0.2mm pure nickel is no dice. I’m not sure about 0.2mm nickel-plated steel.
@@markb1911 i think in this price range it is very Good quality welder
Ето и моя spot welder: ruclips.net/video/aho-gP1jGkQ/видео.htmlsi=HK6TMl1xaIfqMO4w