How to Wire an Automatic Transfer Switch Panel
HTML-код
- Опубликовано: 1 июн 2022
- Dual power automatic transfer switch YCQ4 is new developed micro household power transfer switch. When the normal power is abnormal, the spare power works at once, which therefore ensures the continuirty, reliability, and safety of power supply. The product is specially designed for household orbit-type installation.
.
.
.
.
.
.
.
#powersupply #electric#electricalengineer #electrician #electricianproblems #electricianstools #electricalshacks #electricianlife #electricity #electriclightorchestra #electrical #electricfamily #electricalwork #electriclongboard #electricalsky #electricianslibrary #electricianlife #engineeringlife #transistor Наука
This is a good video that shows how to solve a common problem with ATS. The video is clear and easy to follow, and the demonstration is helpful. If you are having problems with your ATS repeating transfers, I recommend watching this video.
Other comments
The video is well-produced and informative.
The presenter is clear and easy to understand.
The video is a good length.
The video is visually appealing.
I would recommend this video to anyone who is interested in learning how to solve a repeated transfer issue with an ATS.
nice and great video
Well explained, many thanks..
Awesome video. Never heard of CNC before but this explanation was too good.
thanks
good video, clear explanation 👍👍
thanks friend
Excelente explanation. Thank you very much
thanks so much for you comment
That is clear and i like the 10 second delay. Think i will add this myself.
thank you for this video
thanks for your comment
this is excellent, thank you
If use an Timer in the sensor lines in the green connections, it could work by Timer ?
Best Products
thanks so much friend
Badass. Ty for your service to society. Keep up the good work!!
thanks for your support sir
Why are the wires so small? I have this same ATS and the wiring is extremely thick. Since this is handling AC power, and potentially a lot of it (45A from a 10 kW solar system at 220v), the wire would need to be 6 AWG copper or 4 AWG aluminum. Is this just for illustration purposes? These wires are fine for control wires but definitely not for carrying AC.
Nice video. Without connecting the control wires can the ats still function manually to switch sources with the orange knob, and if so does the manual/auto switch still need to be set?
How about if i want to put indicator light on both A and B power supply. Where do i put the wires?
Love your video, is it possible to create one implementing a full connection using solar panels with it modules, connecting the main house/office greed as a automated transfer switch when the electricity goes out? Thanks
P
Can the NC contacts of source A be used to start remotely a Genset? (Genset is source B)
Great video. Can you please list the above parts? I can't real all of the part numbers on the components in the video
mcb and ats
Very nice explanation. What about setting up using contactors, which one is the best?
both are okay friend,
Please recommend for me a suitable home DB to install the 2 pole ATS with a delay timer 2 RCBO, 1 Voltage regulator & 4 circuit breakers. Thank you for the work you are doing.
sir,you may pls show me the dimension of the devices you have installed in the DB for us to recommend the suitable one for you
Where can buy time delay switch and the change over auto
Hello, pls I need a brief explanation on how my generator 3 wires to switch on and off could be connected to the ATS. Thanks for your response.
Gfeat as usual
❤❤❤❤❤❤❤
thanks
Can this ATS be used with battery and inverter supply instead of generator source?
yes,sir
Can you give connection diagram
Hi
Can you give me the website link of your company?
Is this ats can be use for solar setup?
Yes
is the output of changeover switch uninterruptible during transition? Tia
yes,it is
where do the ground wires go?
How much inrush current is involved when the ATS switches over?
I measured 1A peak at 220vac
SO where is the link?
I have two power source. Both are line connctions. Is it possible when i am using power source of B, it will not switch to Main power supply. If B gone then it will switch to Main. Because this ATS interrupting me when i using desktop PC.
an ATS just performs as when there is no power in your main power supply, then it will automatically switch to the standby power for uninterrupted power supply sir
Che scatola din hai usato?
Do give connection Digram
But, there is no voltage protection in this? Should we add RCBO as well?
no need sir
@@CNCElectric1988 But, sir there is a lot of voltage fluctuations and due to this bulbs in house are damaged. Also, I want to put my 2x 1.5 ton AC's on this switch.
Hello where is can fine CNC products in India
hi,this is the distributor in India for CNC, you can contact here: CNC India
Vishal internatioal
ADRESS:Godwn NO1 Gidc 1
Modhera Road
Mahesana Mahesana Gujarta 384002
+91 94276 84440 mailto:vishalgroup_guj@yahoo.com
Please, how do I get this one to buy. Am in Ghana
check this link for direct purchase sir: cnc-official.com/products/cnc-ycq4-100e-2p-din-rail-2p-ats-dual-power-automatic-transfer-switch-electrical-selector-switches-uninterrupted-power-63a-100?_pos=1&_sid=102c63a38&_ss=r
Do we have CNC in UAE?
Sir,we do not have the one there in UAE
Can this ATS send signal to start generator?
nope sir
È possibile inserire un timer per ritardare la commutazione da fotovoltaico ad enel?
not suggested sir
Metti il link del timer utilizzato
here it is: cnc-official.com/products/cnc-yct8-m-16a-multifunction-timer-relay-with-10-function-choices-ac-230v-din-rail-type-time-delay-relay?_pos=1&_sid=2e4cef07a&_ss=r @@fabiocompagnone4056
Distributor in Pakistan?
hi, we have the distributor in Pakistan, what can I do for you
@@CNCElectric1988 contact details please
@@UmarFarooq-jn7dt If you have any questions about CNC Electric, please feel free to contact us.
Lanm.
Email: cncele@cncele.com.
Whatsapp/Mob:+86 17705027151
@@UmarFarooq-jn7dt0