Thank you Rajvir Singh for this very informative video. You have explained it very well and made it easy to understand with the dialogue along with the video, pictures and diagram. I am just about to start learning the basics of plc at tafe(college) here in australia for my electrical apprenticeship and we use omron plc's at work so this will help me alot. I also look forward to taking your plc course on your site as i like the way you teach. Thanks
Mr Niño Jeorge Lita - Thank you! For your information, if you are interested : NFI celebrating EDU Success- Get 80% Discount on Advanced Industrial Automation course - PLC, HMI and VFD. Buy for 19 USD or 1199 INR only - Offer valid for today only- Limited Coupons: Click here for more details: us6.campaign-archive1.com/?u=23510552c30bef171930c212a&id=9cd970fa30&e=7b5b7472d5
I've watched your videos about PLC and industrial control. it's so very helpful and i recommend all your videos to be watch and subscribe to my classmates. Thanks alot..
Niño Jeorge Lita - Thank you so much! I am glad that my videos let you understand the concept, and must share with your friends- Nothing can be better than that !
Hi Rajvir thank you the lesson. could you assist me, i am using a omron cp1l-m30-dt-d plc for some reason my output channels are lacked and over riding my program the light goes on and off between the programs, my output devices are always active and not responding to my program. is there a seeting im missing in the plc? is the plc broken which will be strange as two of them are having the same problem. my program and wiring is all good.
Thank you for your video! good video. I think you should turn off supply power for PLC before connnect wire. That will make PLC safety more! Thank you!
+huuhuy huy It's alright as we are dealing with 24VDC. There is no harm because if you see technically sensors are also switching voltage ON/OFF while PLC is running. So it's alright! Anyways thanks for suggestion
Dear sir thanks for the videos , can you make a video on connecting shaft encoder to PLC and using shift register with shaft encoder to reject/sort application thanks
Hi good night, I have a question what what kind of comunication I have to do, I have a cpu CJ2M cpu13 , it has a USB port and one rs232, but I don't what kind of protocol use to communicate with the software lab view, I don't know how to make a host link connection and a toolbus connection, can you help me
Hello sir, can u Please tell me what are the use of I/O adjusting , which is normally located under the programming cable section in omron plc, thanks in advance..
i have omron plc cp1e and input pin number 9 dosent work but if i measured the voltage between com and pin 9 voltmeter show 24 volt plz whats the problem
Hi , Very useful documents for PLC engineers and students ,thanks My project is how to control (Frequency , voltage , temperature and protection) Micro hydro power generator using PLC. Thanks
Thank You very much for Introduction of Omron PLC. In the same time you use some electrical wiring software. That's also quite interest, if you can give more information. Thank you again. SUNIL WIJERATNE
Thank you SUNIL WIJERATNE for your appreciation. Our motive is to make learning easy! Between you can join our free basic Industrial Automation course at online.nfiautomation.org
Hi, Thanks for your great turorials! They are really helpful! I have a CP1L PLC wich i want to use with your good tootorials, to learn as I go. when I try tu upload a program it completes, but does not remove the old program on the PLC. How do I clear the memory on it?
Hello maceide - Thanks for appreciation. Well, when you tranfer the program frpm PC to PLC it overwrites the old program with the new one. How come yous till having the old program in PLC? Can you please share the process with screenshots at nfiautomation@gmail.com
is it possible to give Neutral to the common of the outputs so that the PlC would give me N and wire the first terminal of the indicators to the outputs of PLC and give the other terminal of the indicators ( Live ) L? so that i give 220V to the indicators
Hello, I truly appreciate your guidance and teachings. I am trying to learn about Panel Building and your videos are truly helpful. Can you please tell me how can I transfer my program from old PLC to a new one? I am helping someone to transfer his current program from an old PLC to a new PLC. The PLC in your video is the exact one I am working on right now. 11 I/O not 7 I/O.
Hy our dear Teacher its my first time here watching your lesson its my first in this video I wana know more about OMRON PLC because in my work we use OMRON plc connected via Ethernet and i dont know how to do to connect to one of them how to configure cx one parametter to pass node and adresses did you presented a lesson with ? waiting for an answer . all my respect Sir
Well we have lecture for Omron CP1E type PLC. You can check the curriculum for the course Learn 5 PLC's in a day at www.nfiautomation.org. Let me know if that helps
+Abdellah Dkouk Hello ! thank you for your appreciation. Well i have not worked on Ethernet based Omron PLC but i can try helping you out. We can rather have a LIVE session to try out. Write me to nfiautomation@gmail.com to schedule the class.
Hi, I was registered IN ADVANCED AUTOMATION COURSE . I was searching my course but I don´t find it. I have two Questions...first, I want to register in Factory I/O Ultimate License Combo, but i want to know if License is LIFETIME. Second..what I need to do for get back my course. Regards from Mexico, have a nice day.
Dear Rulo, Thanks for writing, if you get a free coupon for our new platform. Just write an email at nfiautomation@gmail.com with your old registered email ID. We have moved all our students from old platform to new platform. Secondly, the ULtimate License combo is for 6 months only. You can renew it after 6 months though. If you need lifetime license it would cost you around 400€ or more, i need to confirm.
I have OMRON PLC installed in a machine. The PLC is password protected. The vendor has given me password. Can you guide, how to safely release the password without effecting the existing program and how to save it. Thanks in advance
Your youtube videos are very useful to me and interesting
Thank you so much 🙂
Dude, you started the way I wanted.
I'm Brazilian and understood perfectly.
I have passed this onto my students. Thank you for making a great course.
***** Thanks Mr Alex, you can pass our free course to your students as well online.nfiautomation.org ! There you go :)
name of the software for electrical drawing please
I'm just beginning to work on Omron PLC and this video is really brilliant. Thank you so much.
Thanks for the appreciation Kun Zuo, glad you find it useful ! let me know if I can assist you with anything .
I love your accent. Reminds me of my time in Tel Aviv and Jerusalem. Shalom brother.
Thanks :)
Nice clarification & very useful. Salute for shared your knowledge with each others.
Thanks a lot Rajvir, this video was very clear and easy to understand. Greetings from Bolivia
+YoshioVids Your welcome ! Greetings from Germany!
hi, just wanna ask can a CPM1A Omron PLC be connected to an AC motor and a DC solenoid valve
at the same time?
Thank you Rajvir Singh for this very informative video. You have explained it very well and made it easy to understand with the dialogue along with the video, pictures and diagram. I am just about to start learning the basics of plc at tafe(college) here in australia for my electrical apprenticeship and we use omron plc's at work so this will help me alot. I also look forward to taking your plc course on your site as i like the way you teach. Thanks
Thank you Kaes - I appreciate your comment on our Omron videos :) For any technical query you can always write to us at nfiautomation@gmail.com
Rajvir Singh, well brought out. Simple and clear. Thanks a lot. Looking forward to more in-depth learning. Greetings from Kenya
Thanks ;) check learn.codeandcompile.com
hi, just wanna ask Can a CPM1A Omron PLC be connected to an AC motor and a DC solenoid valve
at the same time?
Thank you. For your video. It is. Best video. I ever. Seen on plc that video help to understand plc wiren completely thank you sir
We glad that you shared the knowledge you have !
You made it easy for us to understand. Thank you so much
ONLINE PROFESSOR RAJVIR SINGH ! :-D
Mr Niño Jeorge Lita - Thank you! For your information, if you are interested : NFI celebrating EDU Success- Get 80% Discount on Advanced Industrial Automation course - PLC, HMI and VFD. Buy for 19 USD or 1199 INR only - Offer valid for today only- Limited Coupons: Click here for more details:
us6.campaign-archive1.com/?u=23510552c30bef171930c212a&id=9cd970fa30&e=7b5b7472d5
I've watched your videos about PLC and industrial control. it's so very helpful and i recommend all your videos to be watch and subscribe to my classmates. Thanks alot..
Niño Jeorge Lita - Thank you so much! I am glad that my videos let you understand the concept, and must share with your friends- Nothing can be better than that !
very informative, your directions and voice is very clear. Super b
Thank you😊
Perfect ! Like your video From Canada
thanks a lot sir. your concept is very clear and easy to understand.
Hello Sir, what is the software you use to show us the wiring diagram?
Thank you Rajvir for great informative videos. Martin UK
+Mart C Your welcome! Thanks for the appreciation. Check our complete courses at www.nfiautomation.org.
I rarely like any video, but this video was realy useful, thanks for your help.
Thanks
Thank you for the video.
I bought a CP1E. I downloaded Cx_Programmer, andfinding that CP1E is missing in the dropdown menu. Any suggestions?
Hi Rajvir thank you the lesson. could you assist me, i am using a omron cp1l-m30-dt-d plc for some reason my output channels are lacked and over riding my program the light goes on and off between the programs, my output devices are always active and not responding to my program. is there a seeting im missing in the plc? is the plc broken which will be strange as two of them are having the same problem. my program and wiring is all good.
Perhaps this could be that there is another bit in the program which is latching your output. You need to check for that.
im looking for this explanation.... thx, very helpfull
thank you very much, this explains a lot i bought 1 of this a couple weeks ago (CP1E 10DR-A)
Your welcome Baby Nash! :))
excellent video master rajvir
Thank you Rodel :)
Very Basic information. But well explained. Thanks a Lot 4 sharing your time and your knowledge.
why is the PLC output always on, even though it hasn't been programmed. thanks and i need an answer
To which PLC output you are referring? :)
This lesson is really nice
Thank you 🤩
Thank you for your great videos
Thank you :) don’t forget to check out our new website for free courses. Only at www.codeandcompile.com
Thank you for your video! good video. I think you should turn off supply power for PLC before connnect wire. That will make PLC safety more! Thank you!
+huuhuy huy It's alright as we are dealing with 24VDC. There is no harm because if you see technically sensors are also switching voltage ON/OFF while PLC is running. So it's alright! Anyways thanks for suggestion
+Rajvir Singh (NFI Automation) Thank you so much!
+huuhuy huy Your welcome!
great video... please do a video on how to install omron plc free
software
may I know what the spesific function of using batteray? what if we don't use it?
You will lose data in retentive variables
explained very well👍
Sir what software are using for circuit diagram?
What is the software your using for electrical drawings
I was wondering about the same thing. Circuitmaker is a little complicated initially
Nice and precise....good for beginners
Thank you for appreciation! Get more details at www.nfiautomation.org
Thank you for this lesson, the idea was clear. Greeting from Italy.
is the lamp 220v ac or 24 vdc?
Sir how can we run servo motor with mpg
Thanks for the tutorial...
You're welcome
bhout wadiya video aa 22 ji
Check out our amazing Christmas offer at www.nfiautomation.org
Dear sir thanks for the videos , can you make a video on connecting shaft encoder to PLC and using shift register with shaft encoder to reject/sort application thanks
Sorry, I cannot make this as it needs a working prototype which unfortunately I do not have :/
thanks a lot. it helps me understand plc wiring.
Hi good night, I have a question what what kind of comunication I have to do, I have a cpu CJ2M cpu13 , it has a USB port and one rs232, but I don't what kind of protocol use to communicate with the software lab view, I don't know how to make a host link connection and a toolbus connection, can you help me
heloo my friend coud you help for
omron
sysmac
cj1m
cpu21 software ?
How to connect with expansion?
Greetings from automationtrader.com team!
Hello sir, can u Please tell me what are the use of I/O adjusting , which is normally located under the programming cable section in omron plc, thanks in advance..
Hi, I am having CP1E-NA-20DR.. In cx programmer which address i need to put to get the analog data from 90 ch and 91 ch.. thanks in advance
I never tried working on this PLC., but I'm sure it must be mentioned in its manual. Please check., or send a copy at nfiautomation@gmail.com
Got it through plc forum . .. Thanks for reply
excellent explanation
Hi rajvir, could you please share tutorial for omron rtu modbus ..
is there any way to simulate our ladder logic program without having the plc???
Thanks for sharing your knowledge! Would be better if you hold the mic steadily
hi, wanna ask Can a CPM1A Omron PLC be connected to an AC motor and a DC solenoid valve
at the same time?
Yea
Very helpful ever i found
Thank you so much
i have omron plc cp1e and input pin number 9 dosent work but if i measured the voltage between com and pin 9 voltmeter show 24 volt plz whats the problem
Thank u of good explanation I had one doubt how to find how many input came means motor will run without seeing program able to find out
+Jai jai Sorry, i do not understand your question! Can you brief me again ,?
hi, nice job , which type of programming cable do you use ? if it's a normal cable like for printer , is it possible to have his driver ????
Can you please tell me what program you are using for showing the circuit diagram around the 8 minute mark?
Nice video by the way.
Hii! Iam using Automation Studio for wiring explanation ! N thanks for the appreciation jad51
Hi ,
Very useful documents for PLC engineers and students ,thanks
My project is how to control (Frequency , voltage , temperature and protection) Micro hydro power generator using PLC.
Thanks
Good luck for your project:)
Thanks for your great work!
thank! This video will help my work very much!
Your welcome dao trung Kien - ;) You can get more of FREE/Paid training at www.nfiautomation.org
Thank You very much for Introduction of Omron PLC. In the same time you use some electrical wiring software. That's also quite interest, if you can give more information. Thank you again.
SUNIL WIJERATNE
Thank you SUNIL WIJERATNE for your appreciation. Our motive is to make learning easy! Between you can join our free basic Industrial Automation course at online.nfiautomation.org
hi, nice job , which type of programming cable do you use ?
Where do to connect the Zero volt when connecting it back to the power supply
thank you very much. Its very useful ..
Hi,
Thanks for your great turorials! They are really helpful!
I have a CP1L PLC wich i want to use with your good tootorials, to learn as I go. when I try tu upload a program it completes, but does not remove the old program on the PLC. How do I clear the memory on it?
Hello maceide - Thanks for appreciation. Well, when you tranfer the program frpm PC to PLC it overwrites the old program with the new one. How come yous till having the old program in PLC? Can you please share the process with screenshots at nfiautomation@gmail.com
Can you please confirm which PLC is comfortable with reasonable price.
Was the output not meant to be ac voltage ? Inputs DC voltage output AC voltage
Nice video. What software do you use for drawing you electical schematics?
hi, sorry for late reply !! I am using Automation Studio
Sir please can u make a video on timer and counter of omron plc properly
More videos are in the paid course available at www.nfiautomation.org
is it possible to give Neutral to the common of the outputs so that the PlC would give me N and wire the first terminal of the indicators to the outputs of PLC and give the other terminal of the indicators ( Live ) L?
so that i give 220V to the indicators
SIR
MAKE VIDEOS OF 0-10V AND 4-20MA SCALING VFD LOAD CELL TEAPREATURE CONTROLLER RPM WITH HMI PROGRAMMING
s'il vous plaît je peux le lien de téléchargement de CX Programmer version 7.1 ou supérieur urgent
hii i have omron plc of cj serie when i connect to pc and go online it shown that failed to connect plc can you say where is the problem
Good morning Sir
Sir my plc power LED glow but run don't glow what's problem
Means the PLC is not in a RUN mode
very helpful as a beginner....
+Jorge Saucedo you are welcome :)
thank you rajvir sir!! I getting hint how to start plc learning.i have a single question how to download it's software.thank you.
Omron Cx one might be available in the internet for trial version! Kindly google it
thank you very much on this video
Your welcome Regidor Yting . Check out our free basic Industrial automation course at online.nfiautomation.org
thank you
What software do you use to draw?
Hello,
I truly appreciate your guidance and teachings. I am trying to learn about Panel Building and your videos are truly helpful.
Can you please tell me how can I transfer my program from old PLC to a new one? I am helping someone to transfer his current program from an old PLC to a new PLC. The PLC in your video is the exact one I am working on right now. 11 I/O not 7 I/O.
Download the PLC program from old PLC and change the controller in it and make sure I/Os are correctly defined and then download to the new PLC
@@thegeterrdone Thanks a lot. It helped!
what is the software to draw the cuicurt
Hao le van - It's Automation Studio
Rajvir Singh thank you so much
thanks you from colombia
thank you, greeting from Indonesia
good one sir.........
what type of power supply do you use there ? btw thanks, very good explanation and very helpful
+Hp Lenovo you are welcome! I use 24 VDC SMOS from omron with 4 Amps current rating
Hy our dear Teacher its my first time here watching your lesson its my first in this video
I wana know more about OMRON PLC because in my work we use OMRON plc connected via Ethernet and i dont know how to do to connect to one of them how to configure cx one parametter to pass node and adresses
did you presented a lesson with ?
waiting for an answer .
all my respect Sir
Well we have lecture for Omron CP1E type PLC. You can check the curriculum for the course Learn 5 PLC's in a day at www.nfiautomation.org.
Let me know if that helps
+Abdellah Dkouk Hello ! thank you for your appreciation. Well i have not worked on Ethernet based Omron PLC but i can try helping you out. We can rather have a LIVE session to try out. Write me to nfiautomation@gmail.com to schedule the class.
thank you so much for your explanation about plc...
otherwise, I would like to learn plc wiring with dpdt relay
Thank you for your appreciation! Get free/paid courses on Automation at www.nfiautomation.org
THANK YOU
Thx for making this video.
nice sir...
Thnx a lot its very usefull
Thanks for the feedback!
Thanks very much. This was a great help
think you man for the good vedio
excellent I need to register for trainning
You are most welcome. Check out our amazing Christmas offer at www.nfiautomation.org
Hi, I was registered IN ADVANCED AUTOMATION COURSE . I was searching my course but I don´t find it. I have two Questions...first, I want to register in Factory I/O Ultimate License Combo, but i want to know if License is LIFETIME. Second..what I need to do for get back my course. Regards from Mexico, have a nice day.
Dear Rulo, Thanks for writing, if you get a free coupon for our new platform. Just write an email at nfiautomation@gmail.com with your old registered email ID. We have moved all our students from old platform to new platform.
Secondly, the ULtimate License combo is for 6 months only. You can renew it after 6 months though. If you need lifetime license it would cost you around 400€ or more, i need to confirm.
thankyou sir.. very helpfull
Thx, it's very usefull and so clear !
Your welcome!
which program do u use for omron plc
can you unlock password plc omron/
I have OMRON PLC installed in a machine. The PLC is password protected. The vendor has given me password. Can you guide, how to safely release the password without effecting the existing program and how to save it.
Thanks in advance
Tq very helpful if I wanna do latching how could I?
Then check this video: ruclips.net/video/qm7D1FuMfPs/видео.html